The box is physically at Fountain Valley, renamed, renumbered onto 10.251/16,
and serving inference again. This lands the repo half of that.
Host: hostname ana-ml2 -> fv-ml1, pinned to 10.251.50.54 by a dnsmasq
reservation so the address the runbook, DNS and LiteLLM all assume is the
address it actually has. Its headscale node is renamed too.
The sweep ran from scripts/fv-ml1-rename-sweep.sh, whose allowlist is the
reason this diff touches current-state files and not the record. Dated
persistent-memory entries, archival-memory and incident notes still say
ana-ml2 in 31 and 62 places respectively, because that is what the box was
when those things happened. Rewriting them would make the history lie.
LiteLLM was the load-bearing piece and needed more than the api_base sed the
runbook describes. Twenty api_base entries repointed, but a grep-and-verify
pass also caught a LIVE pass_through_endpoints target for the scalar-judge
reward route still on the old address -- an api_base-only substitution would
have left it dead. Four prose references describing current state were
repointed as well; one historical note recording where a hand-test was run
is deliberately left pointing at 10.250.50.54.
Two facts in the server tables were wrong and are corrected here. The site is
Fountain Valley, not Anaheim. And the box has FOUR RTX PRO 6000 Blackwell
Max-Q, not two -- verified by nvidia-smi -L and independently by PCI
enumeration of four GB202GL devices. That is 391 GB of VRAM rather than 196,
which changes what fits on it.
DNS: fv-ml1, fv-ml1-bmc and fv-gw added under the fv site via the piggyback
approach, scriberr re-homed, and the ana-ml2 records removed. Applied to all
three resolvers. The BMC record carries a warning that its 802.1q VLAN tag
must stay disabled -- it shipped tagging VLAN 250 into an untagged port,
which made it invisible to every network-side diagnostic and is the reason
it appeared dead through several cable changes.
Verified end to end: summarizer and sec both answer through the Anaheim
gateway across the mesh to FV seats on different ports.
Previously a partial list "from vzdump logs + servers/ dirs". Replaced
with the full output of `qm list` on pfi-pve (2026-05-14), cross-
referenced against `servers/`. VMs that have a server dir are
annotated with the path; ones that don't are flagged "not yet in
`servers/` inventory" so the gap is discoverable.
Resolved:
- VM 100 = pbs-ana (was "VM (TBD)" in prior version)
- VM 106 = corviduo-dev (added 2026-05-12; was missing from the list)
Surfaced (new findings, not yet inventoried):
- VM 101 — PFI-ANA-DC (Active Directory domain controller)
- VM 103 — PFI-SlaveBot (purpose unclear from name alone)
- VM 104 — PFI-Mongo (MongoDB host, separate from pfi-postgres)
The three new-to-inventory VMs deserve `servers/<name>/` directories
with READMEs, but that's a follow-up — creating new inventory entries
is out of tend-docs scope.
VM 105's annotation said "PGDATA on NFS from ana-nas" — postgres
migrated off NFS to local VM disk on 2026-04-23 per STATUS.md ("DB data
on local disk, not NFS. pfi-postgres migrated 2026-04-23"). Updated to
reflect current reality with the migration date as the rot detector.
Still-TBD note for VM 33: `pbs-ana` is listed as "VM (TBD)" — was
deployed and has its own server dir, but its VM ID isn't recorded
here. `qm list | grep pbs` on pfi-pve would resolve, but my SSH to
pfi-pve as lkraven is currently password-required so I can't pull
this myself. Flag for next pfi-pve console session.
Surfaced by /tend-docs audit 2026-05-14.
Bundles the inventory expansion since 2026-04-22:
- New host dirs (READMEs + ssh-target where dir name doesn't resolve):
ana-nas, ana-wg, esh-vm-db, nh3-nas, pbs-ana, pbs-nh3.
- New PFI VM snapshots (registered + key-installed 2026-04-23):
ana-filebot, pfi-ana-webhost, pfi-postgres, pfi-pteradactyl,
pfi-tacticalrmm, sf-ana-container, sfsrv-ana (system + proxmox).
- servers/irv-ml1: ONBOARDING.md (the first-time setup notes from when
the host was brought into the fleet) + ssh-target (10.100.79.3 over
the WG tunnel — name doesn't DNS-resolve from this workstation).
- servers/{ana-ml2,pfi-pve,sf-r630}/README.md: updates to capture BMC
IPs, the iDRAC vs OS hostname distinction (sf-r630 hardware =
sfsrv-ana OS), and the ana-ml2 Supermicro BMC (10.250.250.50,
distinct from the Dell R750xs iDRAC).
- configs/homepage/docker.yaml: irv-ml1-docker provider added so
homepage auto-discovers irv-ml1's stacks over the WG tunnel.
- docs/orientation.md: narrative fleet overview written for fresh
Claude sessions — sites, backup architecture, governing principles,
gotchas, where-to-look guide. Pointed at from CLAUDE.md.
Parallel to refresh-server-info.sh but pipes proxmox_inspect.sh and writes
to servers/<host>/proxmox-details.txt. Same discovery / ssh-target /
validate-only / dry-run behavior.
Fleet-wide `all` matches dir names containing `-pve` (covers *-pve and
*-pve-* so esh-pve-nas is included alongside pfi-pve / nh3-pve / esh-pve).
Explicit names are never filtered — useful for one-off PVE hosts with
non-matching names.
Validation checks the captured snapshot for: truncation, missing PVE
version line, non-Proxmox target, and surfaces backup-coverage "NO"
verdict counts so gaps show up in the validate-only output.
Initial fleet snapshot refreshed.
Read-only companion to server_inspect.sh. Runs over ssh via stdin the
same way:
ssh root@pfi-pve 'bash -s' < scripts/proxmox_inspect.sh \\
> servers/pfi-pve/proxmox-details.txt
Captures what the generic inspect misses on PVE nodes:
- Cluster + node resources (pvesh get /cluster/resources)
- VM list + per-vmid config highlights (qm list, qm config)
- LXC list + per-ctid config highlights (pct list, pct config)
- Storage pools (pvesm status, zpool, storage.cfg, NFS mounts)
- Backup jobs table parsed from /etc/pve/jobs.cfg (no jq needed)
- Per-guest backup coverage verdict: YES/NO with reason
- Most-recent actual backup per VMID on each local dump storage
- PBS targets, replication jobs, listening ports, subscription status
Coverage analysis surfaces the real gap: on pfi-pve, VMIDs 106, 107,
109, 112, 113 have no scheduled backup; VMID 106 (PFI-Tailscale) has
not been backed up since 2024-05-31. nh3-pve uses "all" job and covers
everything. esh-pve + esh-pve-nas share the tank-vmbu dump storage via
NFS; coverage splits cleanly across the two nodes.
First snapshots committed for each PVE host.
pfi-pve (Anaheim), nh3-pve (NH), esh-pve + esh-pve-nas (ESH home lab) now
have servers/<host>/ entries with ssh-target files, README stubs, and
first snapshots. Register all four via add-host.sh + ssh-copy-id; SSH
auth is root@<name> with key-based access.
Fix a resolver bug in the three workspace scripts: previously, when a
hostname resolved via /etc/hosts, resolve_target returned the bare name
and ssh dropped the user prefix stored in ssh-target (connecting as the
wrong user). Now ssh-target wins whenever it's present, since it can
carry user@ or port info that /etc/hosts + ssh_config cannot. Falls back
to the dir name only when no ssh-target file exists.
CLAUDE.md and README.md split the fleet table into Docker hosts vs
hypervisors with an explicit placement rule: don't deploy Docker stacks
on PVE hosts; capture host-level detail with server_inspect.sh, use
Proxmox-native tooling (qm list, pvesh, zpool) for VM/storage audits.
vh