687c6999f3fd382915bf83b4517e0d9cbc988833
3
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 vh
|
687c6999f3 |
fix(esphome): actually disable remote-build — two switches, only one closes the port
ha-dev found the WS API and tested the read half; this runs the write. But the
command they identified is the wrong half, which is worth recording because the
naming actively misleads.
remote_build/set_offloader_settings {remote_builds_enabled: false}
the OUTBOUND half — this dashboard sending builds to peers.
Persists, reads back false, and leaves the receiver listening.
remote_build/set_settings {enabled: false}
the receiver-side master switch, per ReceiverController.set_settings's
own docstring. Tears the listener down live, no restart needed.
Set both. Verified across a restart: 6055 absent, zero peer-link bind lines,
zero mDNS advertisements, both switches read back false. Persisted at
_remote_build.enabled in /config/.device-builder.json — which did not exist
until the flag was first changed, so 'no on-disk representation' was true only
of the default state.
ESPHOME_REMOTE_BUILD_HOST=127.0.0.1 is KEPT as a backstop rather than removed.
The off state now lives in one JSON file whose in-code default is enabled:True
(controllers/remote_build/_state.py) and whose module's stores soft-recover to
an empty model on a malformed blob rather than erroring — so a lost or corrupt
settings file silently re-enables remote-build. With the env var set, that
regression binds loopback instead of 0.0.0.0.
Also finishes deploy-stack.sh properly. This was patched three times in one
session because -a is -rlptgoD and a non-root identity cannot apply owner,
group, permissions OR times to a root-owned directory; each patch fixed one
letter and the next deploy failed on the next one, every time exiting 23 AFTER
a successful transfer. The rule is now written into the script: the deploy
syncs content, the conventions own metadata. --no-o --no-g --no-perms
--omit-dir-times. Verified: clean run, destination keeps 2775 root:docker with
setgid intact.
|
||
|
vh
|
8073a6aed9 |
fix(esphome): bind the remote-build peer-link to loopback; finish the rsync fix
ha-dev asked for the Device Builder 1.0.0 remote-build receiver to be turned off: one instance, builds run locally, so the feature has no role, and it was binding 0.0.0.0:6055 with mDNS advertisement on a privileged host-network container that writes firmware to devices. Reading the source first changed the framing. controllers/remote_build/ _state.py declares 'remote_builds_enabled: bool = True', so nobody enabled it — it arrived on by default with the rewrite. And the flag has no on-disk representation until it is changed: neither .device-builder.json nor .device-builder-preferences.json carries it, and the only writer is the app's own command API behind the UI. Setting it from a playbook would mean inventing a schema for a model I have not read. So this binds ESPHOME_REMOTE_BUILD_HOST=127.0.0.1 — a documented env var, no entrypoint override — which removes the LAN reachability now and is verifiable (ss reports 127.0.0.1:6055, was 0.0.0.0:6055). It is explicitly NOT the off switch ha-dev asked for and the compose comment says so; the Settings toggle is one UI click and the line can go once someone flips it. Also completes yesterday's deploy-stack.sh fix, which was half a fix. --no-o --no-g stopped rsync chgrp-ing a root:docker destination as a non-root identity, but the very next deploy failed the same way one layer along — 'failed to set times on ...' — because a non-root identity cannot utime() a root-owned directory either. Same exit 23 after a successful transfer. Added --omit-dir-times. Fixing only the group half looked fixed until the next run, which is the whole reason this is worth a line in the script's comment. |
||
|
vh
|
d1769ed114 |
feat(esphome): pin 2026.8.2, relocate config into backup coverage, rotate creds
ha-dev requested all three on esh-docker-vm (operator-authorized); the stack had no canonical copy, so it is added to stacks/ rather than edited in place. Pinned ghcr.io/esphome/esphome:2026.8.2 — it was bare, which is exactly how it sat on 2025.8.2 for a year: docker pulled latest once at container creation (2026-04-20, from a layer cached 2025-08-29) and never re-pulled. Every current Everything Presence sensor failed config validation on that build. Verified after: esphome version reports 2026.8.2 and the vendor's own Pro package now validates clean (exit 0, 'Configuration is valid!'), which is the item that unblocks the six waiting sensors. Relocated /path/to/esphome/config (the upstream template placeholder, taken literally by docker) to /opt/docker/conf/esphome, matching the mosquitto pattern. Copied and checksum-verified all 5763 files before removing the original, with a tarball kept at /root/pre-change-archive/. Credentials moved off test/ChangeMe to the vaulted 32-char secret (esh-docker-vm/esphome-dashboard), passed via a host-only .env so nothing plaintext enters git. Three things the job surfaced that were not in the request: The directory is 538 MB, not the 3 KB reported — .esphome/platformio is 508 MB of PlatformIO toolchain and .esphome/build another 31 MB, both regenerable. Relocating as-asked would have inflated restic's /opt/docker source ~45x against its own ~12 MB budget, so both subtrees are excluded in /etc/restic/profiles.yaml. The 3 KB of actual config is now covered, which was the point. 2026.8.2 logs a DEPRECATION for the bare USERNAME/PASSWORD env names and says they will stop working in a future release — a silent auth loss on some later bump, on a privileged host-network container that can flash any ESP device on the LAN. Switched to ESPHOME_USERNAME/ESPHOME_PASSWORD; the warning is gone. Device Builder 1.0.0 opens a NEW listener on 0.0.0.0:6055 (remote-build peer-link) that 2025.8.2 did not have. Also fixes deploy-stack.sh: plain 'rsync -a' makes rsync chgrp the destination as the deploy identity, which since the 2026-09-14 root:docker normalisation is not root. It failed with 'Operation not permitted' and exit 23 AFTER transferring content — a loud error on a deploy that had succeeded. --no-o --no-g lets the setgid bit assign the group instead. |