TAILSCALE IPv6. `tailscale status` had been reporting, continuously:
2 add route failures; first was: permission denied
adding address fd7a:115c:a1e0::6/128 from tunnel interface: permission denied
with tailscale0 carrying only 100.64.0.6/32 while headscale had assigned it
an IPv6 address it could not use.
Not a capability problem -- tailscaled runs as root with the full bounding
set. /etc/sysctl.conf:59 sets net.ipv6.conf.default.disable_ipv6=1, and
`default` is inherited by NEWLY CREATED interfaces; tailscale0 is created at
daemon start, inherits it, and the kernel returns EPERM for every attempt.
Fixed with a scoped systemd drop-in rather than flipping the global default.
That line carries no comment, but IPv6-off-by-default on a host with ~26
docker bridges reads as deliberate, and changing it would hand IPv6 to every
future bridge as a side effect of fixing Tailscale.
⚠ It must be ExecStartPost, not /etc/sysctl.d. A sysctl.d entry for a
per-interface key is applied at boot, BEFORE tailscale0 exists, and is
silently ignored -- the setting would look present and do nothing.
Also learned: setting the sysctl on the LIVE interface is not enough.
tailscaled only attempts the address at startup or on a netmap change, so
the verify failed for 60s until the daemon was restarted. Restart is part
of the operation, not an afterthought.
Verified: fd7a:115c:a1e0::6/128 present on tailscale0, health clean, mesh
and services (arbo, ytvc) up.
README. It documented the pre-headscale topology as current -- "Reachable
IP: 10.100.79.3 (WireGuard tunnel endpoint)", "No direct LAN access", and a
refresh caveat telling you to bring WG up. That sends anyone triaging this
host to the wrong layer, which is the exact tax the file exists to prevent.
Now: mesh primary at 100.64.0.6, LAN 10.6.110.50, and wg0 documented as
STILL UP with a live peer -- tailscale uses that address as its direct
endpoint, so it is load-bearing, not vestigial.
Recorded with it, because these cost hours tonight and will cost them again:
- Irvine is a TENANCY behind a Fortinet PFI does not control. Its TLS
inspection breaks Tailscale's relay and control channels (41 cert
warnings/week, 4 control-plane episodes in 14 days). Usually invisible
because direct peer paths carry the data. No fix on our side.
- Diagnose reachability with `tailscale ping`, NOT the status output:
headscale said "online" and status said "active, 19.7 GB" while nothing
on the host answered. Both are last-known state; only a round trip is
liveness.
- The ~26 docker bridges make tailscaled report captive portals.
Two stale claims corrected: the hostname rename it called "pending" is done,
and `ollama` is listed as running on :11434 when it is gone -- verified, no
unit file, nothing listening, no process. It is banned fleet-wide.
The 2026-09-06 headscale cutover retired irv-ml1's wg0 tunnel IP 10.100.79.3
(now 10.6.110.50). Repointed all LIVE canonical refs to the DNS NAME so the next
move can't re-break them: homepage.href/siteMonitor labels across 25 stack
composes, load-bearing env defaults (asset-engine INFERENCE_HOST, open-webui
AUDIO_TTS_OPENAI_API_BASE_URL, skaldsong SKALDSONG_TTS_BASE_URL, zonos-gateway
ZONOS_URL, dia), homepage services.yaml manual cards (Voice Design Studio,
IRV-ML1), and servers/irv-ml1/ssh-target. Updated the stale 'WG tunnel' comment
to the mesh reality.
Left as-is: README curl-examples and .env.example comments (docs), and historical
mentions in CLAUDE.md/persistent-memory. NOTE: applying the label repoints to the
RUNNING irv-ml1 containers needs a recreate per service (labels read at creation);
deployed .env values are separate from these canonical defaults.
Records the deployment plus the finding that outlives it: no_speech_prob
alone does not carry a hallucination threshold on this stack. Silence and
room tone both hallucinated 'Thank you.' at no_speech_prob under 0.11,
where a conventional >0.6 gate passes them through; avg_logprob separates
~6x better. Any future consumer asking for a Whisper hallucination gate
should be pointed at the composite, not the single field.
Also banks the digest-pin rationale (the VAD flag is an upstream-declared
unstable variable name, so a floating tag can move gate semantics
silently), the two deployment gotchas, the docker-vs-native GPU index
inversion on this host, and Eyra's future diarization VRAM claim on the
same A6000.
Adds speaches to the irv-ml1 stack table alongside parakeet, with the
reason both exist.
Three changes prepping infra for asset_engine's orchestration feature
(SSH-driven bring-up / bring-down of irv-ml1 inference services with
per-device VRAM gating, contract in vh/asset-engine commit 5a36f8c):
1. asset-engine compose + .env.example + playbook gain a read-only
bind-mount for /app/runtime/ssh — the dedicated ed25519 keypair
(generated on ana-docker, not in the repo) plus a pinned known_hosts
for irv-ml1's host fingerprint. Env vars SSH_KEY_PATH and
SSH_KNOWN_HOSTS are exposed for the app to consume.
2. docs/asset-engine/services.yaml gains a `lifecycle: { stack, vram_gb,
gpu_device_id }` block on each of 12 orchestratable irv-ml1 services
(kokoro, chatterbox, index-tts, qwen3-tts, cosyvoice, fish-s2,
kyutai-tts, vibevoice, voxtral, parakeet, stable-audio-open, ace-step).
VRAM numbers are estimates from model footprint at fp16 — tune from
real nvidia-smi measurements once the gate is live. comfyui and
kokoro-captioned are deliberately excluded (variable-VRAM and
shared-container respectively).
3. servers/irv-ml1/README.md docker-stacks table now lists all 13
inference stacks (was only dockge + agents + comfyui) with port +
GPU pinning columns.
Pubkey deployed to ~lkraven/.ssh/authorized_keys on irv-ml1;
end-to-end SSH from ana-docker → irv-ml1 verified with strict
host-key checking.
Bundles the inventory expansion since 2026-04-22:
- New host dirs (READMEs + ssh-target where dir name doesn't resolve):
ana-nas, ana-wg, esh-vm-db, nh3-nas, pbs-ana, pbs-nh3.
- New PFI VM snapshots (registered + key-installed 2026-04-23):
ana-filebot, pfi-ana-webhost, pfi-postgres, pfi-pteradactyl,
pfi-tacticalrmm, sf-ana-container, sfsrv-ana (system + proxmox).
- servers/irv-ml1: ONBOARDING.md (the first-time setup notes from when
the host was brought into the fleet) + ssh-target (10.100.79.3 over
the WG tunnel — name doesn't DNS-resolve from this workstation).
- servers/{ana-ml2,pfi-pve,sf-r630}/README.md: updates to capture BMC
IPs, the iDRAC vs OS hostname distinction (sf-r630 hardware =
sfsrv-ana OS), and the ana-ml2 Supermicro BMC (10.250.250.50,
distinct from the Dell R750xs iDRAC).
- configs/homepage/docker.yaml: irv-ml1-docker provider added so
homepage auto-discovers irv-ml1's stacks over the WG tunnel.
- docs/orientation.md: narrative fleet overview written for fresh
Claude sessions — sites, backup architecture, governing principles,
gotchas, where-to-look guide. Pointed at from CLAUDE.md.
New stack mirroring PFI convention (stacks/comfyui/) using
mmartial/comfyui-nvidia-docker:ubuntu24_cuda12.8-20260312. Both GPUs
exposed, pinned to CUDA 12.8 to match the host's 570.x driver and the
native cuda-toolkit already in place.
Layout — single tree under /worktank/comfyui/ (462G dedicated, 1%
used pre-deploy):
- basedir/ → /basedir user state (models, workflows, custom_nodes,
input, output); owned 1000:1000 so external
tools can edit workflow JSON directly.
- run/ → /comfy/mnt ComfyUI source + venv + pip cache (~7.8G
after bootstrap). Bind mount instead of
named volume — the image refuses to chown
mounted paths at startup, so keeping this
lkraven-owned avoids the sudo dance.
servers/irv-ml1/README.md refreshed: Docker upgraded to 29.4.1 with
traefik-net in place; dockge + beszel-agent + dozzle-agent already
present; /storetank dropped 92% → 64%; restic coverage to
rest-server-nh3 is operational (not "currently none" as prior text).
vh