The box is physically at Fountain Valley, renamed, renumbered onto 10.251/16,
and serving inference again. This lands the repo half of that.
Host: hostname ana-ml2 -> fv-ml1, pinned to 10.251.50.54 by a dnsmasq
reservation so the address the runbook, DNS and LiteLLM all assume is the
address it actually has. Its headscale node is renamed too.
The sweep ran from scripts/fv-ml1-rename-sweep.sh, whose allowlist is the
reason this diff touches current-state files and not the record. Dated
persistent-memory entries, archival-memory and incident notes still say
ana-ml2 in 31 and 62 places respectively, because that is what the box was
when those things happened. Rewriting them would make the history lie.
LiteLLM was the load-bearing piece and needed more than the api_base sed the
runbook describes. Twenty api_base entries repointed, but a grep-and-verify
pass also caught a LIVE pass_through_endpoints target for the scalar-judge
reward route still on the old address -- an api_base-only substitution would
have left it dead. Four prose references describing current state were
repointed as well; one historical note recording where a hand-test was run
is deliberately left pointing at 10.250.50.54.
Two facts in the server tables were wrong and are corrected here. The site is
Fountain Valley, not Anaheim. And the box has FOUR RTX PRO 6000 Blackwell
Max-Q, not two -- verified by nvidia-smi -L and independently by PCI
enumeration of four GB202GL devices. That is 391 GB of VRAM rather than 196,
which changes what fits on it.
DNS: fv-ml1, fv-ml1-bmc and fv-gw added under the fv site via the piggyback
approach, scriberr re-homed, and the ana-ml2 records removed. Applied to all
three resolvers. The BMC record carries a warning that its 802.1q VLAN tag
must stay disabled -- it shipped tagging VLAN 250 into an untagged port,
which made it invisible to every network-side diagnostic and is the reason
it appeared dead through several cable changes.
Verified end to end: summarizer and sec both answer through the Anaheim
gateway across the mesh to FV seats on different ports.
Retire qwen35-vl (Qwen3.5-9B); add qwen36-vl serving the official FP8
Qwen3.6-35B-A3B vision MoE on :8007 under its TRUE name only — no alias.
qwen3.5-9b-fp8 is killed at vLLM AND the litellm gateway (404/400); a model is
never served under a prior model's name. Consumer (comfy-dev/arbo) notified +
migrated; arbo vkeys flipped to all-proxy-models; shared all-agents-local key
repointed to qwen3.6-35b-a3b.
GPU-1 rebalance for the heavier FP8 weights (~34 GB): granite 0.35->0.24 /
131K->64K, embed/rerank 0.05->0.03 (reclaimed util-reservation waste). Verified:
vision correct, 20-concurrent/endpoint load test = no OOM (~7.5 GB headroom).
Drop the llama-swap qwen3.5-9b GPU-0 pin (GPU 0 freed for the creative-writing
hot-swap card). NVFP4 was the lighter fit (~21 GB) but its vLLM ModelOpt-MoE
loader is broken (KeyError w2_input_scale / lm_head.input_scale, vllm #44081);
revisit when fixed.
ana-ml2 was upgraded 2026-06 from dual RTX 6000 Ada (46GB, cc 8.9) to
dual RTX PRO 6000 Blackwell Max-Q (96GB, cc 12.0 / sm_120). Update the
stale hardware facts across the workspace:
- CLAUDE.md servers table row
- servers/ana-ml2/README.md hardware spec (+ refreshed system-details.txt)
- stacks/vllm compose + .env.example FP8/KV comments (Ada cc 8.9 -> Blackwell cc 12.0)
- stacks/llama-swap config VRAM-budget comment (48GB -> 96GB, GPU-0 pin)
Also corrects the adjacent stale 'Phi-4-mini' comment in the granite
service block (the service has been Granite 4.1 8B since 34a43a0).
Doc/comment-only; no runtime change.
ana-ml2's Ada->Blackwell swap (2x96GB) frees GPU 0 entirely. Pin llama-swap
to GPU 0 via NVIDIA_VISIBLE_DEVICES so on-demand large-model hot-loads land
there, off GPU 1 where the always-on vLLM services (granite + embed/rerank/
reward) live. Closes the long-standing 'pin llama-swap to GPU 0' item.
IBM Granite 4.1 dense instruct (3B + 8B), unsloth Q4_K_M GGUF via -hf
syntax, 64K ctx with q8 KV. Auto-exposed through the LiteLLM gateway
wildcard (ana-docker:4000) and direct on llama-swap (:9292).
Replaces the retired irv-ml1 Ollama granite4.1 — Ollama is now banned
fleet-wide; serving consolidates onto the sanctioned llama-swap/vLLM
substrate.
Worldtree-dev's --reasoning-format gemma suggestion isn't supported in
the deployed llama.cpp build (accepts only none|deepseek|deepseek-legacy).
Falling back to deepseek, which also populates reasoning_content — the
field Worldtree's GemmaProvider fallback path checks. Verified via test
inference: 608 reasoning_content deltas + 199 content deltas + 0 raw
<|channel> marker leaks.
Two related changes shipped together. The stack rename is independent
but adding `vllm-reward` to the existing `vllm-qwen3` would have made
that name actively misleading.
**Rename:** `stacks/vllm-qwen3/ → stacks/vllm/`. Updated all in-repo
references (README.md root, servers/ana-ml2/, stacks/llama-swap/,
configs/restic/ana-ml2/, docs/runbooks/disaster-recovery.md). Two
intentional history mentions retained (servers/ana-ml2 + stacks/vllm
README).
**Add `vllm-reward` service:** serves Skywork-Reward-V2-Llama-3.1-8B-AWQ
on port 8003. The AWQ output is a locally-quantized model (not from HF),
so bind-mounts `/tank/aimodels/llm:/local-models:ro` rather than the
shared HF cache. Model config.json declares LlamaForSequenceClassification
which vLLM's pooling runner picks up automatically — produces a single
reward score per input via /classify.
**Flag note:** the user's spec listed `--task classify`, but vLLM 0.19.1
deprecated --task in favor of --runner pooling (model architecture in
config.json drives the classification head). Compose uses --runner
pooling with a comment explaining the substitution.
**GPU memory:** no rebalance needed — production had already tuned
EMBED/RERANK down from 0.40 to 0.20 each (canonical .env.example now
matches reality). Adding REWARD at 0.30 totals 0.70, leaving ~14 GB
headroom on the 48 GB Ada.
**Server-side:** brought existing vllm-qwen3 down, mv'd
/opt/docker/compose/vllm-qwen3 → /opt/docker/compose/vllm, appended
REWARD_* lines to existing .env (preserving API_KEY/HF_TOKEN), deployed
new compose via scripts/deploy-stack.sh, brought all 3 services up.
**Smoke tests:**
- /health on 8001/8002/8003 → 200
- /v1/models on 8003 → lists Skywork/Skywork-Reward-V2-Llama-3.1-8B-AWQ
with max_model_len 16384
- /classify with a sample conversation → returns LABEL_0 with prob 0.9999
(single-output regression-style reward score, expected shape for a
reward model)
Playbook handles models, datasets, and spaces (via --var repo_type=...)
since 3025d49 — the "-model" suffix was misleading. Renaming to match
actual scope.
Updates the single in-repo reference (changelog comment in
stacks/llama-swap/conf/config.yaml). config.yaml was scp'd to ana-ml2;
no docker compose restart needed (comment-only).
AtlaAI's Selene-1-Mini judge model for evaluation/scoring tasks.
Llama 3.1 8B base, mradermacher imatrix-quantized Q6_K (~6.5GB,
quality-leaning quant). Apache-2.0. Per Atla cookbook these defaults
hit 84% on RAGTruth hallucination eval.
New 'JUDGE / EVAL MODELS' section between the dense chat models and
the embedding models — separate category from chat/reasoning since
the run-params shape is different (deterministic-leaning: temp 0.01,
top-p 1.0, no repeat penalty).
q8_0 KV cache to fit 32K ctx cleanly on the 3090 with headroom.
Pre-pulled into the shared HF cache via the new
playbooks/pull-hf-model.yaml playbook (canonical replacement for
ad-hoc huggingface_hub.snapshot_download calls; see CHANGELOG).
Smoke-tested 2026-05-13: GET /v1/models lists selene-1-mini-8b,
POST /v1/chat/completions returns expected output cleanly.
Symptom: granite-4-small and qwen3.6-27b were evicting each other
when called in alternation. granite is the news-digest curator (fires
twice daily on cron) — being evicted means a cold reload (~5s) on
every digest tick, plus visible churn whenever the user uses 27b
concurrently.
Added granite-4-small to the `pinned` group as a persistent member.
~5-6 GB at Q4_K_M + 120K KV ≈ comfortable inside the existing pin
budget (qwen3.5-9b ~6 GB → ~12 GB total persistent). Single RTX 6000
Ada is 48 GB, leaves ~36 GB headroom for whichever non-pinned model
the user invokes (qwen3.6-27b at ~30 GB fits cleanly).
Updated the pinned group's docstring to capture the current member set
+ VRAM math + the historical context (qwen3.6-35-a3b was here, was
too heavy, got removed yesterday). Marked the granite ttl: 0 with the
matching "pinned — never unloads" comment as the other group members.
Symptom: qwen3.6-35-a3b refused to deload when other models needed
the VRAM, even with the model itself at ttl: 0. The pinning came from
the `pinned` group's `persistent: true` flag, which exempts members
from eviction by the scheduler regardless of memory pressure. The
model's ttl: 0 only governs idle-timeout, NOT scheduler eviction —
those are separate concerns.
Removed qwen3.6-35-a3b from the group's members. Kept ttl: 0 on the
model itself: still no idle-unload, but the scheduler CAN now evict
it when another non-coexistent model is requested. qwen3.5-9b stays
pinned (~6 GB at Q4 — cheap to hold).
Updated the inline comment + the group-header docstring to reflect
the new semantics so future-Claude doesn't undo this.
The base qwen3.6-35-a3b is already ttl: 0 via the `pinned` group.
The three other Qwen 3.6 variants (abliterated, heretic, 27b) had
ttl: 600 → llama-swap auto-unloaded them after 10 min idle, costing
the next request a full reload (~5-15s). Removed so they stay loaded
once warm. Still get evicted by the normal swap when another
non-pinned model is requested — these aren't joining the pinned group,
just losing their idle-unload timer.
Decision recorded in CLAUDE.md ("Stack tree convention") and memory
(convention_stacks_vs_mirror.md):
stacks/<stack>/ canonical / intent. git-tracked.
deploy-stack.sh reads from here.
stacks-mirror/<host>/<stack>/ snapshot / reality. gitignored.
sync-stacks.sh writes here. Used
for drift inspection only — never
a deploy source.
Bug this fixes: deploy-stack.sh was reading from the mirror, so edits
to stacks/llama-swap/config.yaml never reached ana-ml2. Today's
two new model entries (qwen3.6-35-a3b-heretic + qwen3.6-27b) lived
in the canonical for hours but the deploy reported "in sync" because
the script only diffed mirror vs server.
Changes:
* deploy-stack.sh: source switched from MIRROR_DIR/$HOST/$STACK to
STACKS_DIR/$STACK. Header comment + error message updated.
* sync-stacks.sh: header explicitly identifies its role as drift
detection; documents the diff command for comparing canonical vs
mirror.
* stacks/llama-swap/{config.yaml → conf/config.yaml}: matches the
deploy mapping (conf/ in canonical → /opt/docker/conf/ on host).
* CLAUDE.md: "Stack mirror (pull / push)" section rewritten as
"Stack tree convention (canonical vs mirror)" with the role table
+ workflow rules + diff recipe. Layout diagram updated.
Both models pre-pulled into /tank/aimodels/huggingface (HF_HOME=/hfcache
inside the container) via huggingface_hub.snapshot_download with
hf_transfer for parallel chunked download — heretic's 29 GB landed in
~4 min, unsloth's 26.5 GB in ~3:46 (~118 MB/s each).
heretic: llmfan46/Qwen3.6-35B-A3B-uncensored-heretic-GGUF:Q6_K
27b: unsloth/Qwen3.6-27B-GGUF:UD-Q6_K_XL
Both repos include mmproj-BF16.gguf alongside the main GGUF, and
llama-server's -hf flag auto-loads the mmproj when present in the same
repo (-hf docs: "mmproj is also downloaded automatically if available").
So both entries get vision (image-text-to-text) without needing an
explicit --mmproj path. ttl: 600 (10-min idle unload), matching the
existing abliterated entry's style.
Adds a new `pinned` group with swap: false (models coexist in VRAM),
exclusive: false (group shares with other groups), persistent: true
(never unload). Each member also gets ttl: 0 so the per-model
idle-timeout can't drop them either — belt + suspenders.
Pair is currently qwen3.5-9b (~6 GB Q4) + qwen3.6-35-a3b (~29 GB Q6).
Plus the 128K KV caches, roughly 50-60 GB VRAM resident. Appropriate
for an A6000/H100-class card; verify fit after deploy.
Committed as a canonical change; push + restart still needed on
ana-ml2.
Captures the full workspace state built up to this point:
- CLAUDE.md + README.md describing conventions and the four-host fleet
(ana-ml2, ana-docker, nh3-docker, esh-docker-vm).
- Per-host notes under servers/<host>/ with ssh-target fallback files
and latest system-details snapshots (two in-compose credential leaks
scrubbed; the upstream compose files still need to move those to .env).
- scripts/: server_inspect.sh (read-only remote diagnostic),
refresh-server-info.sh (dir-driven discovery + snapshot capture with
validation warnings), add-host.sh, sync-stacks.sh (pull
compose/conf trees), deploy-stack.sh (push with per-file diff + prompt).
- stacks/: canonical compose for backrest, beszel, dozzle, llama-swap,
rest-server-ana, rest-server-nh3, vllm-qwen3, plus the retired
infinity reference. All use the .env-driven + traefik-net + homepage
label pattern.
- configs/restic/ana-docker/: first resticprofile config + pre-backup
hook (Synapse pg_dump, Seafile mysqldump, Vaultwarden SQLite); templates
for the other three hosts to come.
- docs/pfi/: general infrastructure reference carried over.
- .gitignore excludes .env, stacks-mirror/, and assorted secret/state
filenames to prevent re-leaks on later commits.
vh