MERGE: resolve conflicts

Signed-off-by: jokob-sk <jokob.sk@gmail.com>

.devcontainer/Dockerfile

@@ -0,0 +1,262 @@
+# DO NOT MODIFY THIS FILE DIRECTLY. IT IS AUTO-GENERATED BY .devcontainer/scripts/generate-configs.sh
+
+# ---/Dockerfile---
+# The NetAlertX Dockerfile has 3 stages:
+#
+# Stage 1. Builder - NetAlertX Requires special tools and packages to build our virtual environment, but
+# which are not needed in future stages.  We build the builder and extract the venv for runner to use as 
+# a base.
+#
+# Stage 2. Runner builds the bare minimum requirements to create an operational NetAlertX. The primary
+# reason for breaking at this stage is it leaves the system in a proper state for devcontainer operation
+# This image also provides a break-out point for uses who wish to execute the anti-pattern of using a 
+# docker container as a VM for experimentation and various development patterns.
+#
+# Stage 3. Hardened removes root, sudoers, folders, permissions, and locks the system down into a read-only
+# compatible image. While NetAlertX does require some read-write operations, this image can guarantee the 
+# code pushed out by the project is the only code which will run on the system after each container restart.
+# It reduces the chance of system hijacking and operates with all modern security protocols in place as is
+# expected from a security appliance.
+#
+# This file can be built with `docker-compose -f docker-compose.yml up --build --force-recreate`
+
+FROM alpine:3.22 AS builder
+
+ARG INSTALL_DIR=/app
+
+ENV PYTHONUNBUFFERED=1
+ENV PATH="/opt/venv/bin:$PATH"
+
+# Install build dependencies
+COPY requirements.txt /tmp/requirements.txt
+RUN apk add --no-cache bash shadow python3 python3-dev gcc musl-dev libffi-dev openssl-dev git \
+    && python -m venv /opt/venv
+
+# Create virtual environment owned by root, but readable by everyone else. This makes it easy to copy 
+# into hardened stage without worrying about permissions and keeps image size small. Keeping the commands
+# together makes for a slightly smaller image size.
+RUN pip install -r /tmp/requirements.txt && \
+    chmod -R u-rwx,g-rwx /opt
+
+# second stage is the main runtime stage with just the minimum required to run the application
+# The runner is used for both devcontainer, and as a base for the hardened stage.
+FROM alpine:3.22 AS runner
+
+ARG INSTALL_DIR=/app
+
+# NetAlertX app directories
+ENV NETALERTX_APP=${INSTALL_DIR}
+ENV NETALERTX_DATA=/data
+ENV NETALERTX_CONFIG=${NETALERTX_DATA}/config
+ENV NETALERTX_FRONT=${NETALERTX_APP}/front
+ENV NETALERTX_PLUGINS=${NETALERTX_FRONT}/plugins
+ENV NETALERTX_SERVER=${NETALERTX_APP}/server
+ENV NETALERTX_API=/tmp/api
+ENV NETALERTX_DB=${NETALERTX_DATA}/db
+ENV NETALERTX_DB_FILE=${NETALERTX_DB}/app.db
+ENV NETALERTX_BACK=${NETALERTX_APP}/back
+ENV NETALERTX_LOG=/tmp/log
+ENV NETALERTX_PLUGINS_LOG=${NETALERTX_LOG}/plugins
+ENV NETALERTX_CONFIG_FILE=${NETALERTX_CONFIG}/app.conf
+
+# NetAlertX log files
+ENV LOG_IP_CHANGES=${NETALERTX_LOG}/IP_changes.log
+ENV LOG_APP=${NETALERTX_LOG}/app.log
+ENV LOG_APP_FRONT=${NETALERTX_LOG}/app_front.log
+ENV LOG_REPORT_OUTPUT_TXT=${NETALERTX_LOG}/report_output.txt
+ENV LOG_DB_IS_LOCKED=${NETALERTX_LOG}/db_is_locked.log
+ENV LOG_REPORT_OUTPUT_HTML=${NETALERTX_LOG}/report_output.html
+ENV LOG_STDERR=${NETALERTX_LOG}/stderr.log
+ENV LOG_APP_PHP_ERRORS=${NETALERTX_LOG}/app.php_errors.log
+ENV LOG_EXECUTION_QUEUE=${NETALERTX_LOG}/execution_queue.log
+ENV LOG_REPORT_OUTPUT_JSON=${NETALERTX_LOG}/report_output.json
+ENV LOG_STDOUT=${NETALERTX_LOG}/stdout.log
+ENV LOG_CROND=${NETALERTX_LOG}/crond.log
+ENV LOG_NGINX_ERROR=${NETALERTX_LOG}/nginx-error.log
+
+# System Services configuration files
+ENV ENTRYPOINT_CHECKS=/entrypoint.d
+ENV SYSTEM_SERVICES=/services
+ENV SYSTEM_SERVICES_SCRIPTS=${SYSTEM_SERVICES}/scripts
+ENV SYSTEM_SERVICES_CONFIG=${SYSTEM_SERVICES}/config
+ENV SYSTEM_NGINX_CONFIG=${SYSTEM_SERVICES_CONFIG}/nginx
+ENV SYSTEM_NGINX_CONFIG_FILE=${SYSTEM_NGINX_CONFIG}/nginx.conf
+ENV SYSTEM_SERVICES_ACTIVE_CONFIG=/tmp/nginx/active-config
+ENV SYSTEM_SERVICES_PHP_FOLDER=${SYSTEM_SERVICES_CONFIG}/php
+ENV SYSTEM_SERVICES_PHP_FPM_D=${SYSTEM_SERVICES_PHP_FOLDER}/php-fpm.d
+ENV SYSTEM_SERVICES_CROND=${SYSTEM_SERVICES_CONFIG}/crond
+ENV SYSTEM_SERVICES_RUN=/tmp/run
+ENV SYSTEM_SERVICES_RUN_TMP=${SYSTEM_SERVICES_RUN}/tmp
+ENV SYSTEM_SERVICES_RUN_LOG=${SYSTEM_SERVICES_RUN}/logs
+ENV PHP_FPM_CONFIG_FILE=${SYSTEM_SERVICES_PHP_FOLDER}/php-fpm.conf
+ENV READ_ONLY_FOLDERS="${NETALERTX_BACK} ${NETALERTX_FRONT} ${NETALERTX_SERVER} ${SYSTEM_SERVICES} \
+                       ${SYSTEM_SERVICES_CONFIG} ${ENTRYPOINT_CHECKS}"
+ENV READ_WRITE_FOLDERS="${NETALERTX_DATA} ${NETALERTX_CONFIG} ${NETALERTX_DB} ${NETALERTX_API} \
+                       ${NETALERTX_LOG} ${NETALERTX_PLUGINS_LOG} ${SYSTEM_SERVICES_RUN} \
+                       ${SYSTEM_SERVICES_RUN_TMP} ${SYSTEM_SERVICES_RUN_LOG} \
+                       ${SYSTEM_SERVICES_ACTIVE_CONFIG}"
+
+#Python environment
+ENV PYTHONUNBUFFERED=1 
+ENV VIRTUAL_ENV=/opt/venv
+ENV VIRTUAL_ENV_BIN=/opt/venv/bin
+ENV PYTHONPATH=${NETALERTX_APP}:${NETALERTX_SERVER}:${NETALERTX_PLUGINS}:${VIRTUAL_ENV}/lib/python3.12/site-packages
+ENV PATH="${SYSTEM_SERVICES}:${VIRTUAL_ENV_BIN}:$PATH" 
+
+# App Environment
+ENV LISTEN_ADDR=0.0.0.0
+ENV PORT=20211
+ENV NETALERTX_DEBUG=0
+ENV VENDORSPATH=/app/back/ieee-oui.txt
+ENV VENDORSPATH_NEWEST=${SYSTEM_SERVICES_RUN_TMP}/ieee-oui.txt
+ENV ENVIRONMENT=alpine
+ENV READ_ONLY_USER=readonly READ_ONLY_GROUP=readonly
+ENV NETALERTX_USER=netalertx NETALERTX_GROUP=netalertx
+ENV LANG=C.UTF-8 
+
+
+RUN apk add --no-cache bash mtr libbsd zip lsblk tzdata curl arp-scan iproute2 iproute2-ss nmap \
+    nmap-scripts traceroute nbtscan net-tools net-snmp-tools bind-tools awake ca-certificates \
+    sqlite php83 php83-fpm php83-cgi php83-curl php83-sqlite3 php83-session python3 envsubst \
+    nginx shadow && \
+    rm -Rf /var/cache/apk/*  && \
+    rm -Rf /etc/nginx && \
+    addgroup -g 20211 ${NETALERTX_GROUP} && \
+    adduser -u 20211 -D -h ${NETALERTX_APP} -G ${NETALERTX_GROUP} ${NETALERTX_USER} && \
+    apk del shadow
+
+
+
+# Install application, copy files, set permissions
+COPY --chown=${NETALERTX_USER}:${NETALERTX_GROUP} install/production-filesystem/ /
+COPY --chown=${NETALERTX_USER}:${NETALERTX_GROUP} --chmod=755 back ${NETALERTX_BACK}
+COPY --chown=${NETALERTX_USER}:${NETALERTX_GROUP} --chmod=755 front ${NETALERTX_FRONT}
+COPY --chown=${NETALERTX_USER}:${NETALERTX_GROUP} --chmod=755 server ${NETALERTX_SERVER}
+
+# Create required folders with correct ownership and permissions
+RUN install -d -o ${NETALERTX_USER} -g ${NETALERTX_GROUP} -m 700 ${READ_WRITE_FOLDERS} && \
+    sh -c "find ${NETALERTX_APP} -type f \( -name '*.sh' -o -name 'speedtest-cli' \) \
+    -exec chmod 750 {} \;"
+
+# Copy the virtualenv from the builder stage
+COPY --from=builder --chown=20212:20212 ${VIRTUAL_ENV} ${VIRTUAL_ENV}
+
+
+# Initialize each service with the dockerfiles/init-*.sh scripts, once.
+# This is done after the copy of the venv to ensure the venv is in place
+# although it may be quicker to do it before the copy, it keeps the image
+# layers smaller to do it after.
+RUN apk add libcap && \
+    setcap cap_net_raw+ep /bin/busybox && \
+    setcap cap_net_raw,cap_net_admin+eip /usr/bin/nmap && \
+    setcap cap_net_raw,cap_net_admin+eip /usr/bin/arp-scan && \
+    setcap cap_net_raw,cap_net_admin,cap_net_bind_service+eip /usr/bin/nbtscan && \
+    setcap cap_net_raw,cap_net_admin+eip /usr/bin/traceroute && \
+    setcap cap_net_raw,cap_net_admin+eip $(readlink -f ${VIRTUAL_ENV_BIN}/python) && \
+    /bin/sh /build/init-nginx.sh && \
+    /bin/sh /build/init-php-fpm.sh && \
+    /bin/sh /build/init-crond.sh && \
+    /bin/sh /build/init-backend.sh && \
+    rm -rf /build && \
+    apk del libcap && \
+    date +%s > ${NETALERTX_FRONT}/buildtimestamp.txt
+
+
+ENTRYPOINT ["/bin/sh","/entrypoint.sh"]
+
+# Final hardened stage to improve security by setting least possible permissions and removing sudo access.
+# When complete, if the image is compromised, there's not much that can be done with it.
+# This stage is separate from Runner stage so that devcontainer can use the Runner stage.
+FROM runner AS hardened
+
+ENV UMASK=0077
+
+# Create readonly user and group with no shell access.
+# Readonly user marks folders that are created by NetAlertX, but should not be modified.
+# AI may claim this is stupid, but it's actually least possible permissions as 
+# read-only user cannot login, cannot sudo, has no write permission, and cannot even
+# read the files it owns. The read-only user is ownership-as-a-lock hardening pattern.
+RUN addgroup -g 20212 ${READ_ONLY_GROUP} && \
+    adduser -u 20212 -G ${READ_ONLY_GROUP} -D -h /app ${READ_ONLY_USER}
+
+
+# reduce permissions to minimum necessary for all NetAlertX files and folders
+# Permissions 005 and 004 are not typos, they enable read-only. Everyone can
+# read the read-only files, and nobody can write to them, even the readonly user.
+RUN chown -R ${READ_ONLY_USER}:${READ_ONLY_GROUP} ${READ_ONLY_FOLDERS} && \
+    chmod -R 004 ${READ_ONLY_FOLDERS} && \
+    find ${READ_ONLY_FOLDERS} -type d -exec chmod 005 {} + && \
+    install -d -o ${NETALERTX_USER} -g ${NETALERTX_GROUP} -m 700 ${READ_WRITE_FOLDERS} && \
+    chown -R ${NETALERTX_USER}:${NETALERTX_GROUP} ${READ_WRITE_FOLDERS} && \
+    chmod -R 600 ${READ_WRITE_FOLDERS} && \
+    find ${READ_WRITE_FOLDERS} -type d -exec chmod 700 {} + && \
+    chown ${READ_ONLY_USER}:${READ_ONLY_GROUP} /entrypoint.sh /opt /opt/venv && \
+    chmod 005 /entrypoint.sh ${SYSTEM_SERVICES}/*.sh ${SYSTEM_SERVICES_SCRIPTS}/* ${ENTRYPOINT_CHECKS}/* /app /opt /opt/venv && \
+    for dir in ${READ_WRITE_FOLDERS}; do \
+        install -d -o ${NETALERTX_USER} -g ${NETALERTX_GROUP} -m 700 "$dir"; \
+    done && \
+    apk del apk-tools && \
+    rm -Rf /var /etc/sudoers.d/* /etc/shadow /etc/gshadow /etc/sudoers \
+    /lib/apk /lib/firmware /lib/modules-load.d /lib/sysctl.d /mnt /home/ /root \
+    /srv /media && \
+    sed -i "/^\(${READ_ONLY_USER}\|${NETALERTX_USER}\):/!d" /etc/passwd && \
+    sed -i "/^\(${READ_ONLY_GROUP}\|${NETALERTX_GROUP}\):/!d" /etc/group && \
+    echo -ne '#!/bin/sh\n"$@"\n' > /usr/bin/sudo && chmod +x /usr/bin/sudo
+
+USER netalertx
+
+HEALTHCHECK --interval=30s --timeout=10s --start-period=60s --retries=3 \
+    CMD /services/healthcheck.sh
+
+
+# ---/resources/devcontainer-Dockerfile---
+
+# Devcontainer build stage (do not build directly)
+# This file is combined with the root /Dockerfile by
+#   .devcontainer/scripts/generate-configs.sh
+# The generator appends this stage to produce .devcontainer/Dockerfile.
+# Prefer to place dev-only setup here; use setup.sh only for runtime fixes.
+# Permissions in devcontainer should be of a brutalist nature. They will be
+# Open and wide to avoid permission issues during development allowing max
+# flexibility.
+
+FROM runner AS netalertx-devcontainer
+ENV INSTALL_DIR=/app
+
+ENV PYTHONPATH=${PYTHONPATH}:/workspaces/NetAlertX/test:/workspaces/NetAlertX/server:/usr/lib/python3.12/site-packages
+ENV PATH=/services:${PATH}
+ENV PHP_INI_SCAN_DIR=/services/config/php/conf.d:/etc/php83/conf.d
+ENV LISTEN_ADDR=0.0.0.0
+ENV PORT=20211
+ENV NETALERTX_DEBUG=1
+ENV PYDEVD_DISABLE_FILE_VALIDATION=1
+COPY .devcontainer/resources/devcontainer-overlay/ /
+USER root
+# Install common tools, create user, and set up sudo
+RUN apk add --no-cache git nano vim jq php83-pecl-xdebug py3-pip nodejs sudo gpgconf pytest \
+    pytest-cov zsh alpine-zsh-config shfmt github-cli py3-yaml py3-docker-py docker-cli docker-cli-buildx \
+    docker-cli-compose
+
+RUN install -d -o netalertx -g netalertx -m 755 /services/php/modules && \
+    cp -a /usr/lib/php83/modules/. /services/php/modules/ && \
+    echo "${NETALERTX_USER} ALL=(ALL) NOPASSWD: ALL" >> /etc/sudoers
+ENV SHELL=/bin/zsh
+
+RUN mkdir -p /workspaces && \
+    install -d -m 777 /data /data/config /data/db && \
+    install -d -m 777 /tmp/log /tmp/log/plugins /tmp/api /tmp/run /tmp/nginx && \
+    install -d -m 777 /tmp/nginx/active-config /tmp/nginx/client_body /tmp/nginx/config && \
+    install -d -m 777 /tmp/nginx/fastcgi /tmp/nginx/proxy /tmp/nginx/scgi /tmp/nginx/uwsgi && \
+    install -d -m 777 /tmp/run/tmp /tmp/run/logs && \
+    chmod 777 /workspaces && \
+    chown -R netalertx:netalertx /data && \
+    chmod 666 /data/config/app.conf /data/db/app.db && \
+    chmod 1777 /tmp && \
+    install -d -o root -g root -m 1777 /tmp/.X11-unix && \
+    mkdir -p /home/netalertx && \
+    chown netalertx:netalertx /home/netalertx && \
+    sed -i -e 's#/app:#/workspaces:#' /etc/passwd && \
+    find /opt/venv -type d -exec chmod o+rwx {} \;
+    
+USER netalertx
+ENTRYPOINT ["/bin/sh","-c","sleep infinity"]

.devcontainer/NetAlertX.code-workspace

@@ -0,0 +1,37 @@
+{
+	"folders": [
+		{
+			"name": "NetAlertX Source",
+			"path": "/workspaces/NetAlertX"
+		},
+		{
+			"name": "💾 NetAlertX Data",
+			"path": "/data"
+		},
+		{
+			"name": "🔍 Active NetAlertX log",
+			"path": "/tmp/log"
+		},
+		{
+			"name": "🌐 Active NetAlertX nginx",
+			"path": "/tmp/nginx"
+		},
+		{
+			"name": "📊 Active NetAlertX api",
+			"path": "/tmp/api"
+		},
+		{
+			"name": "⚙️ Active NetAlertX run",
+			"path": "/tmp/run"
+		}
+	],
+	"settings": {
+		"terminal.integrated.suggest.enabled": true,
+		"terminal.integrated.defaultProfile.linux": "zsh",
+		"terminal.integrated.profiles.linux": {
+			"zsh": {
+				"path": "/usr/bin/fish"
+			}
+		}
+	}
+}

.devcontainer/README.md

@@ -0,0 +1,41 @@
+# NetAlertX Devcontainer Notes
+
+This devcontainer replicates the production container as closely as practical, with a few development-oriented differences.
+
+Key behavior
+- No init process: Services are managed by shell scripts using killall, setsid, and nohup. Startup and restarts are script-driven rather than supervised by an init system.
+- Autogenerated Dockerfile: The effective devcontainer Dockerfile is generated on demand by `.devcontainer/scripts/generate-dockerfile.sh`. It combines the root `Dockerfile` (with certain COPY instructions removed) and an extra "devcontainer" stage from `.devcontainer/resources/devcontainer-Dockerfile`. When you change the resource Dockerfile, re-run the generator to refresh `.devcontainer/Dockerfile`.
+- Where to put setup: Prefer baking setup into `.devcontainer/resources/devcontainer-Dockerfile`. Use `.devcontainer/scripts/setup.sh` only for steps that must happen at container start (e.g., cleaning up nginx/php ownership, creating directories, touching runtime files) or depend on runtime paths.
+
+Debugging (F5)
+The Frontend and backend run in debug mode always.  You can attach your debugger at any time.  
+- Python Backend Debug: Attach - The backend runs with a debugger on port 5678. Set breakpoints in the code and press F5 to begin triggering them.
+- PHP Frontend (XDebug) Xdebug listens on 9003. Start listening and use an Xdebug extension in your browser to debug PHP.
+
+Common workflows (F1->Tasks: Run Task)
+- Regenerate the devcontainer Dockerfile: Run the VS Code task "Generate Dockerfile" or execute `.devcontainer/scripts/generate-dockerfile.sh`. The result is `.devcontainer/Dockerfile`.
+- Re-run startup provisioning: Use the task "Re-Run Startup Script" to execute `.devcontainer/scripts/setup.sh` in the container.
+- Start services:
+  - Backend (GraphQL/Flask): `.devcontainer/scripts/restart-backend.sh` starts it under debugpy and logs to `/app/log/app.log`
+  - Frontend (nginx + PHP-FPM): Started via setup.sh; can be restarted by the task "Start Frontend (nginx and PHP-FPM)".
+
+Production Container Evaulation
+1. F1 → Tasks: Shutdown services ([Dev Container] Stop Frontend & Backend Services)
+2. F1 → Tasks: Docker system and build prune ([Any] Docker system and build Prune)
+3. F1 → Remote: Close Unused Forwarded Ports (VS Code command)
+4. F1 → Tasks: Build & Launch Production (Build & Launch Prodcution Docker 
+5. visit http://localhost:20211
+
+Unit tests
+1. F1 → Tasks: Rebuild test container ([Any] Build Unit Test Docker image)
+2. F1 → Test: Run all tests
+
+Testing
+- pytest is installed via Alpine packages (py3-pytest, py3-pytest-cov).
+- PYTHONPATH includes workspace and venv site-packages so tests can import `server/*` modules and third-party libs.
+- Run tests via VS Code Pytest Runner or `pytest -q` from the workspace root.
+
+Conventions
+- Don’t edit `.devcontainer/Dockerfile` directly; edit `.devcontainer/resources/devcontainer-Dockerfile` and regenerate.
+- Keep setup in the resource Dockerfile when possible; reserve `setup.sh` for runtime fixes.
+- Avoid hardcoding ports/secrets; prefer existing settings and helpers (see `.github/copilot-instructions.md`).

.devcontainer/WORKSPACE.md

@@ -0,0 +1,26 @@
+# NetAlertX Multi-Folder Workspace
+
+This repository uses a multi-folder workspace configuration to provide easy access to runtime directories.
+
+## Opening the Multi-Folder Workspace
+
+After the devcontainer builds, open the workspace file to access all folders:
+
+1. **File** → **Open Workspace from File**
+2. Select `NetAlertX.code-workspace`
+
+Or use Command Palette (Ctrl+Shift+P / Cmd+Shift+P):
+- Type: `Workspaces: Open Workspace from File`
+- Select `NetAlertX.code-workspace`
+
+## Workspace Folders
+
+The workspace includes:
+- **NetAlertX** - Main source code
+- **/tmp** - Runtime temporary files
+- **/tmp/api** - API response cache (JSON files)
+- **/tmp/log** - Application and plugin logs
+
+## Testing Configuration
+
+Pytest is configured to only discover tests in the main `test/` directory, not in `/tmp` folders.

.devcontainer/devcontainer.json

@@ -0,0 +1,107 @@
+{
+  "name": "NetAlertX DevContainer",
+  "remoteUser": "netalertx",
+  "workspaceFolder": "/workspaces/NetAlertX",
+  "workspaceMount": "source=${localWorkspaceFolder},target=/workspaces/NetAlertX,type=bind,consistency=cached",
+  "onCreateCommand": "mkdir -p /tmp/api /tmp/log",
+  "build": {
+    "dockerfile": "./Dockerfile", // Dockerfile generated by script
+    "context": "../", // Context is the root of the repository
+    "target": "netalertx-devcontainer"
+  },
+  "capAdd": [
+    "SYS_ADMIN", // For mounting ramdisks
+    "NET_ADMIN", // For network interface configuration
+    "NET_RAW" // For raw packet manipulation
+  ],
+  "runArgs": [
+    "--security-opt",
+    "apparmor=unconfined", // for allowing ramdisk mounts
+    "--add-host=host.docker.internal:host-gateway"
+
+    // Uncomment --network=host to run full NetAlertX scanning capabilities of network scanning in
+    // container. This runs too slowly in a large network to be practical for development purposes.
+    // You can start services such as avahi on the host, in other containers within the network, or
+    // even within this container and connect to them as needed.
+    // "--network=host",
+  ],
+  "mounts": [ 
+    "source=/var/run/docker.sock,target=/var/run/docker.sock,type=bind" //used for testing various conditions in docker
+  ],
+  // ATTENTION: If running with --network=host, COMMENT `forwardPorts` OR ELSE THERE WILL BE NO WEBUI!
+  "forwardPorts": [20211, 20212, 5678],
+  "portsAttributes": { // the ports we care about
+    "20211": {
+      "label": "Frontend:Nginx+PHP"
+    },
+    "20212": {
+      "label": "Backend:GraphQL"
+    },
+    "9003": {
+      "label": "PHP Debug:Xdebug"
+    },
+    "5678": {
+      "label": "Python Debug:debugpy"
+    }
+  },
+
+  "postCreateCommand": {
+      "Install Pip Requirements": "/opt/venv/bin/pip3 install pytest docker debugpy",
+      "Workspace Instructions": "printf '\n\n<> DevContainer Ready!\n\n📁 To access /tmp folders in the workspace:\n   File → Open Workspace from File → NetAlertX.code-workspace\n\n📖 See .devcontainer/WORKSPACE.md for details\n\n'"
+  },
+  "postStartCommand": {
+      "Start Environment":"${containerWorkspaceFolder}/.devcontainer/scripts/setup.sh",
+      "Build test-container":"echo building netalertx-test container in background. check /tmp/build.log for progress. && setsid docker buildx build -t netalertx-test . > /tmp/build.log 2>&1 &"
+  },
+  "customizations": {
+    "vscode": {
+      "extensions": [
+        "ms-python.python",
+        "ms-azuretools.vscode-docker",
+        "felixfbecker.php-debug",
+        "bmewburn.vscode-intelephense-client",
+        "xdebug.php-debug",
+        "ms-python.vscode-pylance",
+        "pamaron.pytest-runner",
+        "coderabbit.coderabbit-vscode",
+        "ms-python.black-formatter",
+        "jeff-hykin.better-dockerfile-syntax",
+        "GitHub.codespaces",
+        "ms-azuretools.vscode-containers",
+        "ms-python.vscode-python-envs",
+        "dbaeumer.vscode-eslint",
+        "esbenp.prettier-vscode",
+        "eamodio.gitlens",
+        "alexcvzz.vscode-sqlite",
+        "mkhl.shfmt",
+        "charliermarsh.ruff",
+        "ms-python.flake8"
+      ],
+      "settings": {
+        "terminal.integrated.cwd": "${containerWorkspaceFolder}",
+        "terminal.integrated.profiles.linux": {
+          "zsh": {
+            "path": "/bin/zsh",
+            "args": ["-l"]
+          }
+        },
+        "terminal.integrated.defaultProfile.linux": "zsh",
+        
+        // Python testing configuration
+        "python.testing.pytestEnabled": true,
+        "python.testing.unittestEnabled": false,
+        "python.testing.pytestArgs": ["test"],
+        "python.testing.cwd": "${containerWorkspaceFolder}",
+        // Make sure we discover tests and import server correctly
+        "python.analysis.extraPaths": [
+          "/workspaces/NetAlertX",
+          "/workspaces/NetAlertX/server",
+          "/app",
+          "/app/server"
+        ]
+      }
+    }
+  },
+
+  "shutdownAction": "stopContainer" // stop container when VSCode is closed
+}

.devcontainer/resources/devcontainer-Dockerfile

@@ -0,0 +1,49 @@
+# Devcontainer build stage (do not build directly)
+# This file is combined with the root /Dockerfile by
+#   .devcontainer/scripts/generate-configs.sh
+# The generator appends this stage to produce .devcontainer/Dockerfile.
+# Prefer to place dev-only setup here; use setup.sh only for runtime fixes.
+# Permissions in devcontainer should be of a brutalist nature. They will be
+# Open and wide to avoid permission issues during development allowing max
+# flexibility.
+
+FROM runner AS netalertx-devcontainer
+ENV INSTALL_DIR=/app
+
+ENV PYTHONPATH=${PYTHONPATH}:/workspaces/NetAlertX/test:/workspaces/NetAlertX/server:/usr/lib/python3.12/site-packages
+ENV PATH=/services:${PATH}
+ENV PHP_INI_SCAN_DIR=/services/config/php/conf.d:/etc/php83/conf.d
+ENV LISTEN_ADDR=0.0.0.0
+ENV PORT=20211
+ENV NETALERTX_DEBUG=1
+ENV PYDEVD_DISABLE_FILE_VALIDATION=1
+COPY .devcontainer/resources/devcontainer-overlay/ /
+USER root
+# Install common tools, create user, and set up sudo
+RUN apk add --no-cache git nano vim jq php83-pecl-xdebug py3-pip nodejs sudo gpgconf pytest \
+    pytest-cov zsh alpine-zsh-config shfmt github-cli py3-yaml py3-docker-py docker-cli docker-cli-buildx \
+    docker-cli-compose
+
+RUN install -d -o netalertx -g netalertx -m 755 /services/php/modules && \
+    cp -a /usr/lib/php83/modules/. /services/php/modules/ && \
+    echo "${NETALERTX_USER} ALL=(ALL) NOPASSWD: ALL" >> /etc/sudoers
+ENV SHELL=/bin/zsh
+
+RUN mkdir -p /workspaces && \
+    install -d -m 777 /data /data/config /data/db && \
+    install -d -m 777 /tmp/log /tmp/log/plugins /tmp/api /tmp/run /tmp/nginx && \
+    install -d -m 777 /tmp/nginx/active-config /tmp/nginx/client_body /tmp/nginx/config && \
+    install -d -m 777 /tmp/nginx/fastcgi /tmp/nginx/proxy /tmp/nginx/scgi /tmp/nginx/uwsgi && \
+    install -d -m 777 /tmp/run/tmp /tmp/run/logs && \
+    chmod 777 /workspaces && \
+    chown -R netalertx:netalertx /data && \
+    chmod 666 /data/config/app.conf /data/db/app.db && \
+    chmod 1777 /tmp && \
+    install -d -o root -g root -m 1777 /tmp/.X11-unix && \
+    mkdir -p /home/netalertx && \
+    chown netalertx:netalertx /home/netalertx && \
+    sed -i -e 's#/app:#/workspaces:#' /etc/passwd && \
+    find /opt/venv -type d -exec chmod o+rwx {} \;
+    
+USER netalertx
+ENTRYPOINT ["/bin/sh","-c","sleep infinity"]

.devcontainer/resources/devcontainer-overlay/services/config/nginx/netalertx.conf.template

@@ -0,0 +1,118 @@
+# DO NOT MODIFY THIS FILE DIRECTLY. IT IS AUTO-GENERATED BY .devcontainer/scripts/generate-configs.sh
+# Generated from: install/production-filesystem/services/config/nginx/netalertx.conf.template
+
+# Set number of worker processes automatically based on number of CPU cores.
+worker_processes auto;
+
+# Enables the use of JIT for regular expressions to speed-up their processing.
+pcre_jit on;
+
+# Configures default error logger.
+error_log /tmp/log/nginx-error.log warn;
+
+pid /tmp/run/nginx.pid;
+
+events {
+	# The maximum number of simultaneous connections that can be opened by
+	# a worker process.
+	worker_connections 1024;
+}
+
+http {
+	# Mapping of temp paths for various nginx modules.
+    client_body_temp_path /tmp/nginx/client_body;
+    proxy_temp_path /tmp/nginx/proxy;
+	fastcgi_temp_path /tmp/nginx/fastcgi;
+	uwsgi_temp_path /tmp/nginx/uwsgi;
+	scgi_temp_path /tmp/nginx/scgi;
+	
+	# Includes mapping of file name extensions to MIME types of responses
+	# and defines the default type.
+	include /services/config/nginx/mime.types;
+	default_type application/octet-stream;
+
+	# Name servers used to resolve names of upstream servers into addresses.
+	# It's also needed when using tcpsocket and udpsocket in Lua modules.
+	#resolver 1.1.1.1 1.0.0.1 [2606:4700:4700::1111] [2606:4700:4700::1001];
+
+	# Don't tell nginx version to the clients. Default is 'on'.
+	server_tokens off;
+
+	# Specifies the maximum accepted body size of a client request, as
+	# indicated by the request header Content-Length. If the stated content
+	# length is greater than this size, then the client receives the HTTP
+	# error code 413. Set to 0 to disable. Default is '1m'.
+	client_max_body_size 1m;
+
+	# Sendfile copies data between one FD and other from within the kernel,
+	# which is more efficient than read() + write(). Default is off.
+	sendfile on;
+
+	# Causes nginx to attempt to send its HTTP response head in one packet,
+	# instead of using partial frames. Default is 'off'.
+	tcp_nopush on;
+
+
+	# Enables the specified protocols. Default is TLSv1 TLSv1.1 TLSv1.2.
+	# TIP: If you're not obligated to support ancient clients, remove TLSv1.1.
+	ssl_protocols TLSv1.2 TLSv1.3;
+
+	# Path of the file with Diffie-Hellman parameters for EDH ciphers.
+	# TIP: Generate with: `openssl dhparam -out /etc/ssl/nginx/dh2048.pem 2048`
+	#ssl_dhparam /etc/ssl/nginx/dh2048.pem;
+
+	# Specifies that our cipher suits should be preferred over client ciphers.
+	# Default is 'off'.
+	ssl_prefer_server_ciphers on;
+
+	# Enables a shared SSL cache with size that can hold around 8000 sessions.
+	# Default is 'none'.
+	ssl_session_cache shared:SSL:2m;
+
+	# Specifies a time during which a client may reuse the session parameters.
+	# Default is '5m'.
+	ssl_session_timeout 1h;
+
+	# Disable TLS session tickets (they are insecure). Default is 'on'.
+	ssl_session_tickets off;
+
+
+	# Enable gzipping of responses.
+	gzip on;
+
+	# Set the Vary HTTP header as defined in the RFC 2616. Default is 'off'.
+	gzip_vary on;
+
+
+    # Specifies the main log format.
+    log_format main '$remote_addr - $remote_user [$time_local] "$request" '
+	    '$status $body_bytes_sent "$http_referer" '
+	    '"$http_user_agent" "$http_x_forwarded_for"';
+
+	# Sets the path, format, and configuration for a buffered log write.
+	access_log /tmp/log/nginx-access.log main;
+
+
+	# Virtual host config
+    server {
+        listen 0.0.0.0:20211 default_server;
+		large_client_header_buffers 4 16k;
+        root /app/front;
+        index index.php;
+        add_header X-Forwarded-Prefix "/app" always;
+
+        location ~* \.php$ {
+            # Set Cache-Control header to prevent caching on the first load
+            add_header Cache-Control "no-store";
+			fastcgi_pass unix:/tmp/run/php.sock;
+            include /services/config/nginx/fastcgi_params;
+			fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
+			fastcgi_param SCRIPT_NAME $fastcgi_script_name;
+
+            fastcgi_param PHP_VALUE "xdebug.remote_enable=1";
+            fastcgi_connect_timeout 75;
+            fastcgi_send_timeout 600;
+            fastcgi_read_timeout 600;
+        }
+    }
+}

.devcontainer/resources/devcontainer-overlay/services/config/php/conf.d/99-xdebug.ini

@@ -0,0 +1,11 @@
+zend_extension="/services/php/modules/xdebug.so"
+extension_dir="/services/php/modules"
+
+[xdebug]
+xdebug.mode=develop,debug
+xdebug.log=/app/log/xdebug.log
+xdebug.log_level=7
+xdebug.client_host=127.0.0.1
+xdebug.client_port=9003
+xdebug.start_with_request=yes
+xdebug.discover_client_host=0

.devcontainer/resources/devcontainer-overlay/services/config/python/backend-extra-launch-parameters

@@ -0,0 +1 @@
+-m debugpy --listen 0.0.0.0:5678 

.devcontainer/resources/devcontainer-overlay/workspaces/.zshrc

@@ -0,0 +1,47 @@
+# NetAlertX devcontainer zsh configuration
+# Keep this lightweight and deterministic so shells behave consistently.
+
+export PATH="$HOME/.local/bin:$PATH"
+export EDITOR=vim
+export SHELL=/bin/zsh
+
+# Start inside the workspace if it exists
+if [ -d "/workspaces/NetAlertX" ]; then
+  cd /workspaces/NetAlertX
+fi
+
+# Enable basic completion and prompt helpers
+autoload -Uz compinit promptinit colors
+colors
+compinit -u
+promptinit
+
+# Friendly prompt with virtualenv awareness
+setopt PROMPT_SUBST
+
+_venv_segment() {
+  if [ -n "$VIRTUAL_ENV" ]; then
+    printf '(%s) ' "${VIRTUAL_ENV:t}"
+  fi
+}
+
+PROMPT='%F{green}$(_venv_segment)%f%F{cyan}%n@%m%f %F{yellow}%~%f %# '
+RPROMPT='%F{magenta}$(git rev-parse --abbrev-ref HEAD 2>/dev/null)%f'
+
+# Sensible defaults
+setopt autocd
+setopt correct
+setopt extendedglob
+HISTFILE="$HOME/.zsh_history"
+HISTSIZE=5000
+SAVEHIST=5000
+
+alias ll='ls -alF'
+alias la='ls -A'
+alias gs='git status -sb'
+alias gp='git pull --ff-only'
+
+# Ensure pyenv/virtualenv activate hooks adjust the prompt cleanly
+if [ -f "$HOME/.zshrc.local" ]; then
+  source "$HOME/.zshrc.local"
+fi

.devcontainer/scripts/confirm-docker-prune.sh

@@ -0,0 +1,18 @@
+#!/bin/bash
+set -euo pipefail
+
+if [[ -n "${CONFIRM_PRUNE:-}" && "${CONFIRM_PRUNE}" == "YES" ]]; then
+  reply="YES"
+else
+  read -r -p "Are you sure you want to destroy your host docker containers and images? Type YES to continue: " reply
+fi
+
+if [[ "${reply}" == "YES" ]]; then
+  docker system prune -af
+  docker builder prune -af
+else
+  echo "Aborted."
+  exit 1
+fi
+
+echo "Done."

.devcontainer/scripts/generate-configs.sh

@@ -0,0 +1,62 @@
+#!/bin/sh
+
+# Generator for .devcontainer/Dockerfile
+# Combines the root /Dockerfile (with some COPY lines removed) and
+# the dev-only stage in .devcontainer/resources/devcontainer-Dockerfile.
+# Run this script after modifying the resource Dockerfile to refresh
+# the final .devcontainer/Dockerfile used by the devcontainer.
+
+echo "Generating .devcontainer/Dockerfile"
+SCRIPT_DIR="$(CDPATH= cd -- "$(dirname -- "$0")" && pwd)"
+DEVCONTAINER_DIR="${SCRIPT_DIR%/scripts}"
+ROOT_DIR="${DEVCONTAINER_DIR%/.devcontainer}"
+
+OUT_FILE="${DEVCONTAINER_DIR}/Dockerfile"
+
+echo "Adding base Dockerfile from $ROOT_DIR..." 
+
+echo "# DO NOT MODIFY THIS FILE DIRECTLY. IT IS AUTO-GENERATED BY .devcontainer/scripts/generate-configs.sh" > "$OUT_FILE"
+echo "" >> "$OUT_FILE"
+echo "# ---/Dockerfile---" >> "$OUT_FILE"
+
+cat "${ROOT_DIR}/Dockerfile" >> "$OUT_FILE"
+
+echo "" >> "$OUT_FILE"
+echo "# ---/resources/devcontainer-Dockerfile---" >> "$OUT_FILE"
+echo "" >> "$OUT_FILE"
+
+echo "Adding devcontainer-Dockerfile from $DEVCONTAINER_DIR/resources..."
+cat "${DEVCONTAINER_DIR}/resources/devcontainer-Dockerfile" >> "$OUT_FILE"
+
+echo "Generated $OUT_FILE using root dir $ROOT_DIR" >&2
+
+# Generate devcontainer nginx config from production template
+echo "Generating devcontainer nginx config"
+NGINX_TEMPLATE="${ROOT_DIR}/install/production-filesystem/services/config/nginx/netalertx.conf.template"
+NGINX_OUT="${DEVCONTAINER_DIR}/resources/devcontainer-overlay/services/config/nginx/netalertx.conf.template"
+
+# Create output directory if it doesn't exist
+mkdir -p "$(dirname "$NGINX_OUT")"
+
+# Start with header comment
+cat > "$NGINX_OUT" << 'EOF'
+# DO NOT MODIFY THIS FILE DIRECTLY. IT IS AUTO-GENERATED BY .devcontainer/scripts/generate-configs.sh
+# Generated from: install/production-filesystem/services/config/nginx/netalertx.conf.template
+
+EOF
+
+# Process the template: replace listen directive and inject Xdebug params
+sed 's/${LISTEN_ADDR}:${PORT}/0.0.0.0:20211/g' "$NGINX_TEMPLATE" | \
+awk '
+/fastcgi_param SCRIPT_NAME \$fastcgi_script_name;/ {
+    print $0
+	print ""
+    print "            fastcgi_param PHP_VALUE \"xdebug.remote_enable=1\";"
+    next
+}
+{ print }
+' >> "$NGINX_OUT"
+
+echo "Generated $NGINX_OUT from $NGINX_TEMPLATE" >&2
+
+echo "Done."

.devcontainer/scripts/isDevContainer.sh

@@ -0,0 +1,8 @@
+#!/bin/bash
+if [ ! -d /workspaces/NetAlertX/.devcontainer ]; then 
+    echo ---------------------------------------------------
+    echo "This script may only be run inside a devcontainer."
+    echo "Not in a devcontainer, exiting..."
+    echo ---------------------------------------------------
+    exit 255
+fi

.devcontainer/scripts/run-tests.sh

@@ -0,0 +1,13 @@
+#!/bin/sh
+# shellcheck shell=sh
+# Simple helper to run pytest inside the devcontainer with correct paths
+set -eu
+
+# Ensure we run from the workspace root
+cd /workspaces/NetAlertX
+
+# Make sure PYTHONPATH includes server and workspace
+export PYTHONPATH="/workspaces/NetAlertX:/workspaces/NetAlertX/server:/app:/app/server:${PYTHONPATH:-}"
+
+# Default to running the full test suite under /workspaces/NetAlertX/test
+pytest -q --maxfail=1 --disable-warnings test "$@"

.devcontainer/scripts/setup.sh

@@ -0,0 +1,110 @@
+#!/bin/bash
+# NetAlertX Devcontainer Setup Script
+#
+# This script forcefully resets all runtime state for a single-user devcontainer.
+# It is intentionally idempotent: every run wipes and recreates all relevant folders,
+# symlinks, and files, so the environment is always fresh and predictable.
+#
+# - No conditional logic: everything is (re)created, overwritten, or reset unconditionally.
+# - No security hardening: this is for disposable, local dev use only.
+# - No checks for existing files, mounts, or processes—just do the work.
+#
+# If you add new runtime files or folders, add them to the creation/reset section below.
+#
+# Do not add if-then logic or error handling for missing/existing files. Simplicity is the goal.
+
+
+SOURCE_DIR=${SOURCE_DIR:-/workspaces/NetAlertX}
+PY_SITE_PACKAGES="${VIRTUAL_ENV:-/opt/venv}/lib/python3.12/site-packages"
+SOURCE_SERVICES_DIR="${SOURCE_DIR}/install/production-filesystem/services"
+
+LOG_FILES=(
+  LOG_APP
+  LOG_APP_FRONT
+  LOG_STDOUT
+  LOG_STDERR
+  LOG_EXECUTION_QUEUE
+  LOG_APP_PHP_ERRORS
+  LOG_IP_CHANGES
+  LOG_CROND
+  LOG_REPORT_OUTPUT_TXT
+  LOG_REPORT_OUTPUT_HTML
+  LOG_REPORT_OUTPUT_JSON
+  LOG_DB_IS_LOCKED
+  LOG_NGINX_ERROR
+)
+
+sudo chmod 666 /var/run/docker.sock 2>/dev/null || true
+sudo chown "$(id -u)":"$(id -g)" /workspaces
+sudo chmod 755 /workspaces
+
+killall php-fpm83 nginx crond python3 2>/dev/null || true
+
+# Mount ramdisks for volatile data
+sudo mount -t tmpfs -o size=100m,mode=0777 tmpfs /tmp/log 2>/dev/null || true
+sudo mount -t tmpfs -o size=50m,mode=0777 tmpfs /tmp/api 2>/dev/null || true
+sudo mount -t tmpfs -o size=50m,mode=0777 tmpfs /tmp/run 2>/dev/null || true
+sudo mount -t tmpfs -o size=50m,mode=0777 tmpfs /tmp/nginx 2>/dev/null || true
+
+sudo chmod 777 /tmp/log /tmp/api /tmp/run /tmp/nginx
+
+
+
+sudo rm -rf "${SYSTEM_NGINX_CONFIG}/conf.active"
+sudo ln -s "${SYSTEM_SERVICES_ACTIVE_CONFIG}" "${SYSTEM_NGINX_CONFIG}/conf.active"
+
+sudo rm -rf /entrypoint.d
+sudo ln -s "${SOURCE_DIR}/install/production-filesystem/entrypoint.d" /entrypoint.d
+
+sudo rm -rf "${NETALERTX_APP}"
+sudo ln -s "${SOURCE_DIR}/" "${NETALERTX_APP}"
+
+for dir in "${NETALERTX_DATA}" "${NETALERTX_CONFIG}" "${NETALERTX_DB}"; do
+  sudo install -d -m 777 "${dir}"
+done
+
+for dir in \
+  "${SYSTEM_SERVICES_RUN_LOG}" \
+  "${SYSTEM_SERVICES_ACTIVE_CONFIG}" \
+  "${NETALERTX_PLUGINS_LOG}" \
+  "/tmp/nginx/client_body" \
+  "/tmp/nginx/proxy" \
+  "/tmp/nginx/fastcgi" \
+  "/tmp/nginx/uwsgi" \
+  "/tmp/nginx/scgi"; do
+  sudo install -d -m 777 "${dir}"
+done
+
+# Create nginx temp subdirs with permissions
+sudo mkdir -p "${SYSTEM_SERVICES_RUN_TMP}/client_body" "${SYSTEM_SERVICES_RUN_TMP}/proxy" "${SYSTEM_SERVICES_RUN_TMP}/fastcgi" "${SYSTEM_SERVICES_RUN_TMP}/uwsgi" "${SYSTEM_SERVICES_RUN_TMP}/scgi"
+sudo chmod -R 777 "${SYSTEM_SERVICES_RUN_TMP}"
+
+for var in "${LOG_FILES[@]}"; do
+  path=${!var}
+  dir=$(dirname "${path}")
+  sudo install -d -m 777 "${dir}"
+  touch "${path}"
+done
+
+printf '0\n' | sudo tee "${LOG_DB_IS_LOCKED}" >/dev/null
+sudo chmod 777 "${LOG_DB_IS_LOCKED}"
+
+sudo pkill -f python3 2>/dev/null || true
+
+sudo chmod 777 "${PY_SITE_PACKAGES}" "${NETALERTX_DATA}" "${NETALERTX_DATA}"/* 2>/dev/null || true
+
+sudo chmod 005 "${PY_SITE_PACKAGES}" 2>/dev/null || true
+
+sudo chown -R "${NETALERTX_USER}:${NETALERTX_GROUP}" "${NETALERTX_APP}"
+date +%s | sudo tee "${NETALERTX_FRONT}/buildtimestamp.txt" >/dev/null
+
+sudo chmod 755 "${NETALERTX_APP}"
+
+sudo chmod +x /entrypoint.sh
+setsid bash /entrypoint.sh &
+sleep 1
+
+echo "Development $(git rev-parse --short=8 HEAD)" | sudo tee "${NETALERTX_APP}/.VERSION" >/dev/null
+
+
+

.dockerignore

@@ -1,8 +1,8 @@
 .dockerignore
+**/.dockerignore
 .env
 .git
 .github
-.gitignore
 docker-compose.yml
 Dockerfile
 Dockerfile.debian

.flake8

@@ -0,0 +1,3 @@
+[flake8]
+max-line-length = 180
+ignore = E221,E222,E251,E203

.github/FUNDING.yml

@@ -0,0 +1,3 @@
+github: jokob-sk
+patreon: netalertx
+buy_me_a_coffee: jokobsk

.github/ISSUE_TEMPLATE/documentation-feedback.yml

@@ -0,0 +1,56 @@
+name: Documentation Feedback 📝
+description: Suggest improvements, clarify inconsistencies, or report issues related to the documentation.
+labels: ['documentation 📚']
+body:
+- type: checkboxes
+  attributes:
+    label: Is there an existing issue for this?
+    description: Please search to see if an open or closed issue already exists for the documentation change you're suggesting.
+    options:
+      - label: I have searched the existing open and closed issues
+        required: true
+- type: textarea
+  attributes:
+    label: What document or section does this relate to?
+    description: |
+      Please include a link to the file and section, if applicable. Be specific about what part of the documentation you are referencing.
+    placeholder: e.g. https://github.com/jokob-sk/NetAlertX/blob/main/docs/FRONTEND_DEVELOPMENT.md
+  validations:
+    required: true
+- type: textarea
+  attributes:
+    label: Describe the issue
+    description: A clear and concise explanation of the issue or inconsistency you found in the documentation.
+    placeholder: e.g. The linked file is referred to as "Contributor Guidelines" but only covers frontend topics.
+  validations:
+    required: true
+- type: textarea
+  attributes:
+    label: Your suggestion or proposed solution
+    description: Suggest how the documentation could be improved, clarified, or reorganized.
+    placeholder: e.g. Combine frontend and backend development into a single CONTRIBUTING.md file with common sections to reduce fragmentation.
+  validations:
+    required: true
+- type: checkboxes
+  attributes:
+    label: What type of issue is this?
+    options:
+      - label: Missing information
+      - label: Inaccurate or outdated information
+      - label: Unclear or confusing content
+      - label: Structure or organization improvements
+      - label: Other (explain in issue)
+- type: textarea
+  attributes:
+    label: Anything else?
+    description: |
+      Additional context, references, screenshots, or related issues. You can also mention if you’re willing to help implement the suggestion.
+  validations:
+    required: false
+- type: checkboxes
+  attributes:
+    label: Can I help implement this? 👩‍💻👨‍💻 
+    description: The maintainer can provide guidance and review your changes.
+    options:
+      - label: "Yes, I’d like to help implement the improvement"
+      - label: "No, I’m just suggesting the idea"

.github/ISSUE_TEMPLATE/enhancement-request.yml

@@ -0,0 +1,33 @@
+name: Enhancement Request
+description: Propose an improvement to an existing feature or UX behavior.
+labels: ['enhancement ♻️']
+body:
+- type: checkboxes
+  attributes:
+    label: Is there an existing issue for this?
+    options:
+      - label: I have searched existing open and closed issues
+        required: true
+- type: textarea
+  attributes:
+    label: What is the enhancement?
+    description: Describe the change or optimization you’d like to see to an existing feature.
+    placeholder: e.g. Make scan intervals configurable from UI instead of just `app.conf`
+    required: true
+- type: textarea
+  attributes:
+    label: What problem does this solve or improve?
+    description: Describe why this change would improve user experience or project maintainability.
+    required: true
+- type: textarea
+  attributes:
+    label: Additional context or examples
+    description: |
+      Screenshots? Comparisons? Reference repos?
+    required: false
+- type: checkboxes
+  attributes:
+    label: Are you willing to help implement this?
+    options:
+      - label: "Yes"
+      - label: "No"

.github/ISSUE_TEMPLATE/feature_request.yml

@@ -1,6 +1,6 @@
 name: Feature Request
 description: 'Suggest an idea for NetAlertX'
-labels: ['Feature request➕']
+labels: ['Feature request ➕']
 body:
 - type: checkboxes
   attributes:

.github/ISSUE_TEMPLATE/i-have-an-issue.yml

@@ -46,7 +46,7 @@ body:
   attributes:
     label: app.conf
     description: |
-      Paste your `app.conf` (remove personal info)    
+      Paste relevant `app.conf`settings (remove sensitive info)    
     render: python
   validations:
     required: false
@@ -59,14 +59,24 @@ body:
   validations:
     required: false
 - type: dropdown
+  id: installation_type
   attributes:
     label: What installation are you running?
     options:
       - Production (netalertx)
       - Dev (netalertx-dev)
       - Home Assistant (addon)
+      - Home Assistant fa (full-access addon)
+      - Bare-metal (community only support - Check Discord)
   validations:
     required: true
+- type: checkboxes
+  attributes:
+    label: Debug or Trace enabled
+    description: I confirm I set `LOG_LEVEL` to `debug` or `trace`
+    options:
+    - label: I have read and followed the steps in the wiki link above and provided the required debug logs and the log section covers the time when the issue occurs.
+      required: true
 - type: textarea
   attributes:
     label: app.log
@@ -75,13 +85,14 @@ body:
       ***Generally speaking, all bug reports should have logs provided.***
       Tip: You can attach images or log files by clicking this area to highlight it and then dragging files in.
       Additionally, any additional info? Screenshots? References? Anything that will give us more context about the issue you are encountering!
-      You can use `tail -100 /app/log/app.log` in the container if you have trouble getting to the log files. 
+      You can use `tail -100 /app/log/app.log` in the container if you have trouble getting to the log files or send them to netalertx@gmail.com with the issue number.
   validations:
     required: false
-- type: checkboxes
+- type: textarea
   attributes:
-    label: Debug enabled
-    description: I confirm I enabled `debug`
-    options:
-    - label: I have read and followed the steps in the wiki link above and provided the required debug logs and the log section covers the time when the issue occurs.
+    label: Docker Logs
+    description: |
+     You can retrieve the logs from Portainer -> Containers -> your NetAlertX container -> Logs or by running `sudo docker logs netalertx`.
+  validations:
     required: true
+

.github/ISSUE_TEMPLATE/refactor-codequality-request.yml

@@ -0,0 +1,37 @@
+name: Refactor / Code Quality Request ♻️
+description: Suggest improvements to code structure, style, or maintainability.
+labels: ['enhancement ♻️']
+body:
+- type: checkboxes
+  attributes:
+    label: Is there an existing issue for this?
+    description: Please check if a similar request already exists.
+    options:
+      - label: I have searched the existing open and closed issues
+        required: true
+- type: textarea
+  attributes:
+    label: What part of the code needs refactoring or improvement?
+    description: Specify files, modules, or components.
+    required: true
+- type: textarea
+  attributes:
+    label: Describe the proposed changes
+    description: Explain the refactoring or quality improvements you suggest.
+    required: true
+- type: textarea
+  attributes:
+    label: Why is this improvement needed?
+    description: Benefits such as maintainability, readability, performance, or scalability.
+    required: true
+- type: textarea
+  attributes:
+    label: Additional context or examples
+    description: Any relevant links, references, or related issues.
+    required: false
+- type: checkboxes
+  attributes:
+    label: Can you help implement this change?
+    options:
+      - label: Yes
+      - label: No

.github/ISSUE_TEMPLATE/security-report.yml

@@ -0,0 +1,28 @@
+name: Security Report 🔐
+description: Report a security vulnerability or concern privately.
+labels: ['security 🔐']
+body:
+- type: markdown
+  attributes:
+    value: |
+      **Important:** For security reasons, please do **not** post sensitive security issues publicly in the issue tracker.
+      Instead, send details to our security contact email: [jokob@duck.com](mailto:jokob@duck.com).
+      
+      We appreciate your responsible disclosure.
+- type: textarea
+  attributes:
+    label: Brief summary (non-sensitive)
+    description: Provide a non-sensitive overview of the security issue.
+    required: true
+- type: textarea
+  attributes:
+    label: Additional context or references
+    description: Any other information or related reports.
+    required: false
+- type: checkboxes
+  attributes:
+    label: Have you sent this report via email to the security contact?
+    options:
+      - label: Yes, I have sent the details to jokob@duck.com
+        required: true
+      - label: Not yet, I will send it after opening this issue

.github/ISSUE_TEMPLATE/setup-help.yml

@@ -44,12 +44,15 @@ body:
   validations:
     required: false
 - type: dropdown
+  id: installation_type
   attributes:
     label: What installation are you running?
     options:
       - Production (netalertx)
       - Dev (netalertx-dev)
       - Home Assistant (addon)
+      - Home Assistant fa (full-access addon)
+      - Bare-metal (community only support - Check Discord)
   validations:
     required: true
 - type: textarea

.github/ISSUE_TEMPLATE/translation-request.yml

@@ -0,0 +1,36 @@
+name: Translation / Localization Request 🌐
+description: Suggest adding or improving translations or localization support.
+labels: ['enhancement 🌐']
+body:
+- type: checkboxes
+  attributes:
+    label: Have you checked for existing translation efforts or related issues?
+    options:
+      - label: I have searched existing open and closed issues
+        required: true
+- type: textarea
+  attributes:
+    label: Language(s) involved
+    description: Specify the language(s) this request pertains to.
+    required: true
+- type: textarea
+  attributes:
+    label: Describe the translation or localization improvement
+    description: Examples include adding new language support, fixing translation errors, or improving formatting.
+    required: true
+- type: textarea
+  attributes:
+    label: Why is this important for the project or users?
+    description: Describe the benefits or target audience.
+    required: false
+- type: textarea
+  attributes:
+    label: Additional context or references
+    description: Link to files, previous translation PRs, or external resources.
+    required: false
+- type: checkboxes
+  attributes:
+    label: Can you help with translation or review?
+    options:
+      - label: Yes
+      - label: No

.github/PULL_REQUEST_TEMPLATE/code-pr-template.md

@@ -0,0 +1,53 @@
+## 📌 Description
+
+<!-- Provide a brief description of the changes you're introducing. Be clear and concise. -->
+
+---
+
+## 🔍 Related Issues
+
+<!-- Reference any related issues (e.g., closes #123, fixes #456) -->
+
+---
+
+## 📋 Type of Change
+
+Please check the relevant option(s):
+
+- [ ] 🐛 Bug fix
+- [ ] ✨ New feature
+- [ ] ♻️ Code refactor
+- [ ] 📚 Documentation update
+- [ ] 🧪 Test addition or change
+- [ ] 🔧 Build/config update
+- [ ] 🚀 Performance improvement
+- [ ] 🔨 CI/CD or automation
+- [ ] 🧹 Cleanup / chore
+
+---
+
+## 📷 Screenshots or Logs (if applicable)
+
+<!-- Add screenshots, terminal output, logs, or anything that helps understand your change -->
+
+---
+
+## 🧪 Testing Steps
+
+<!-- Describe how the change was tested. Manual steps, test cases, or automated test runs -->
+
+---
+
+## ✅ Checklist
+
+- [ ] I have read the [Contribution Guidelines](../../CONTRIBUTING)
+- [ ] I have tested my changes locally
+- [ ] I have updated relevant documentation (if applicable)
+- [ ] I have verified my changes do not break existing behavior
+- [ ] I am willing to respond to requested changes and feedback
+
+---
+
+## 🙋 Additional Notes
+
+<!-- Anything else you want reviewers to know? Future follow-ups? Questions? -->

.github/PULL_REQUEST_TEMPLATE/docs-pr-template.md

@@ -0,0 +1,37 @@
+## 📚 Documentation Update
+
+<!-- Describe the purpose of this PR in one or two sentences. Example: "This PR updates the contributor guidelines by merging frontend and backend sections." -->
+
+---
+
+## 📝 What’s Changed?
+
+<!-- Briefly outline what parts of the documentation were added, changed, removed, or reorganized -->
+
+- Combined frontend and backend development guidelines into a single file
+- Updated `mkdocs.yml` to reflect new structure
+- Added clarification on contribution process
+- Fixed outdated links in sidebar
+
+---
+
+## 🔍 Related Issue(s)
+
+<!-- Link to related issues, discussions, or context (e.g., closes #123) -->
+
+---
+
+## ✅ Checklist
+
+- [ ] I followed the formatting/style of existing documentation
+- [ ] I have read the [Contribution Guidelines](../../CONTRIBUTING)
+- [ ] I updated `mkdocs.yml` if necessary
+- [ ] I verified links and references still work
+- [ ] I checked that my changes improve clarity, structure, or accuracy
+- [ ] I'm open to feedback and suggestions
+
+---
+
+## 🙋 Additional Notes
+
+<!-- Optional: Include anything you want reviewers to be aware of -->

.github/copilot-instructions.md

@@ -0,0 +1,85 @@
+# NetAlertX AI Assistant Instructions
+This is NetAlertX — network monitoring & alerting. NetAlertX provides Network inventory, awareness, insight, categorization, intruder and presence detection. This is a heavily community-driven project, welcoming of all contributions.
+
+You are expected to be concise, opinionated, and biased toward security and simplicity.
+
+## Architecture (what runs where)
+- Backend (Python): main loop + GraphQL/REST endpoints orchestrate scans, plugins, workflows, notifications, and JSON export.
+	- Key: `server/__main__.py`, `server/plugin.py`, `server/initialise.py`, `server/api_server/api_server_start.py`
+- Data (SQLite): persistent state in `db/app.db`; helpers in `server/database.py` and `server/db/*`.
+- Frontend (Nginx + PHP + JS): UI reads JSON, triggers execution queue events.
+	- Key: `front/`, `front/js/common.js`, `front/php/server/*.php`
+- Plugins (Python): acquisition/enrichment/publishers under `front/plugins/*` with `config.json` manifests.
+- Messaging/Workflows: `server/messaging/*`, `server/workflows/*`
+- API JSON Cache for UI: generated under `api/*.json`
+
+Backend loop phases (see `server/__main__.py` and `server/plugin.py`): `once`, `schedule`, `always_after_scan`, `before_name_updates`, `on_new_device`, `on_notification`, plus ad‑hoc `run` via execution queue. Plugins execute as scripts that write result logs for ingestion.
+
+## Plugin patterns that matter
+- Manifest lives at `front/plugins/<code_name>/config.json`; `code_name` == folder, `unique_prefix` drives settings and filenames (e.g., `ARPSCAN`).
+- Control via settings: `<PREF>_RUN` (phase), `<PREF>_RUN_SCHD` (cron-like), `<PREF>_CMD` (script path), `<PREF>_RUN_TIMEOUT`, `<PREF>_WATCH` (diff columns).
+- Data contract: scripts write `/tmp/log/plugins/last_result.<PREF>.log` (pipe‑delimited: 9 required cols + optional 4). Use `front/plugins/plugin_helper.py`’s `Plugin_Objects` to sanitize text and normalize MACs, then `write_result_file()`.
+- Device import: define `database_column_definitions` when creating/updating devices; watched fields trigger notifications.
+
+### Standard Plugin Formats
+* publisher: Sends notifications to services. Runs `on_notification`. Data source: self.
+* dev scanner: Creates devices and manages online/offline status. Runs on `schedule`. Data source: self / SQLite DB.
+* name discovery: Discovers device names via various protocols. Runs `before_name_updates` or on `schedule`. Data source: self.
+* importer: Imports devices from another service. Runs on `schedule`. Data source: self / SQLite DB.
+* system: Provides core system functionality. Runs on `schedule` or is always on. Data source: self / Template.
+* other: Miscellaneous plugins. Runs at various times. Data source: self / Template.
+
+### Plugin logging & outputs
+- Always check relevant logs first.
+- Use logging as shown in other plugins.
+- Collect results with `Plugin_Objects.add_object(...)` during processing and call `plugin_objects.write_result_file()` exactly once at the end of the script.
+- Prefer to log a brief summary before writing (e.g., total objects added) to aid troubleshooting; keep logs concise at `info` level and use `verbose` or `debug` for extra context.
+
+- Do not write ad‑hoc files for results; the only consumable output is `last_result.<PREF>.log` generated by `Plugin_Objects`.
+## API/Endpoints quick map
+- Flask app: `server/api_server/api_server_start.py` exposes routes like `/device/<mac>`, `/devices`, `/devices/export/{csv,json}`, `/devices/import`, `/devices/totals`, `/devices/by-status`, plus `nettools`, `events`, `sessions`, `dbquery`, `metrics`, `sync`.
+- Authorization: all routes expect header `Authorization: Bearer <API_TOKEN>` via `get_setting_value('API_TOKEN')`.
+
+## Conventions & helpers to reuse
+- Settings: add/modify via `ccd()` in `server/initialise.py` or per‑plugin manifest. Never hardcode ports or secrets; use `get_setting_value()`.
+- Logging: use `logger.mylog(level, [message])`; levels: none/minimal/verbose/debug/trace.
+- Time/MAC/strings: `helper.py` (`timeNowDB`, `normalize_mac`, sanitizers). Validate MACs before DB writes.
+- DB helpers: prefer `server/db/db_helper.py` functions (e.g., `get_table_json`, device condition helpers) over raw SQL in new paths.
+
+## Dev workflow (devcontainer)
+- **Devcontainer philosophy: brutal simplicity.** One user, everything writable, completely idempotent. No permission checks, no conditional logic, no sudo needed. If something doesn't work, tear down the wall and rebuild - don't patch. We unit test permissions in the hardened build.
+- **Permissions:** Never `chmod` or `chown` during operations. Everything is already writable. If you need permissions, the devcontainer setup is broken - fix `.devcontainer/scripts/setup.sh` or `.devcontainer/resources/devcontainer-Dockerfile` instead.
+- **Files & Paths:** Use environment variables (`NETALERTX_DB`, `NETALERTX_LOG`, etc.) everywhere. `/data` for persistent config/db, `/tmp` for runtime logs/api/nginx state. Never hardcode `/data/db` or relative paths.
+- **Database reset:** Use the `[Dev Container] Wipe and Regenerate Database` task. Kills backend, deletes `/data/{db,config}/*`, runs first-time setup scripts. Clean slate, no questions.
+- Services: use tasks to (re)start backend and nginx/PHP-FPM. Backend runs with debugpy on 5678; attach a Python debugger if needed.
+- Run a plugin manually: `python3 front/plugins/<code_name>/script.py` (ensure `sys.path` includes `/app/front/plugins` and `/app/server` like the template).
+- Testing: pytest available via Alpine packages. Tests live in `test/`; app code is under `server/`. PYTHONPATH is preconfigured to include workspace and `/opt/venv` site‑packages.
+- **Subprocess calls:** ALWAYS set explicit timeouts. Default to 60s minimum unless plugin config specifies otherwise. Nested subprocess calls (e.g., plugins calling external tools) need their own timeout - outer plugin timeout won't save you.
+
+## What “done right” looks like
+- When adding a plugin, start from `front/plugins/__template`, implement with `plugin_helper`, define manifest settings, and wire phase via `<PREF>_RUN`. Verify logs in `/tmp/log/plugins/` and data in `api/*.json`.
+- When introducing new config, define it once (core `ccd()` or plugin manifest) and read it via helpers everywhere.
+- When exposing new server functionality, add endpoints in `server/api_server/*` and keep authorization consistent; update UI by reading/writing JSON cache rather than bypassing the pipeline.
+
+## Useful references
+- Docs: `docs/PLUGINS_DEV.md`, `docs/SETTINGS_SYSTEM.md`, `docs/API_*.md`, `docs/DEBUG_*.md`
+- Logs: All logs are under `/tmp/log/`. Plugin logs are very shortly under `/tmp/log/plugins/` until picked up by the server.
+    - plugin logs: `/tmp/log/app.log`
+	- backend logs: `/tmp/log/stdout.log` and `/tmp/log/stderr.log`
+	- frontend commands logs: `/tmp/log/app_front.log`
+	- php errors: `/tmp/log/app.php_errors.log`
+	- nginx logs: `/tmp/log/nginx-access.log` and `/tmp/log/nginx-error.log`
+
+## Assistant expectations:
+- Be concise, opinionated, and biased toward security and simplicity.
+- Reference concrete files/paths/environmental variables.
+- Use existing helpers/settings.
+- Offer a quick validation step (log line, API hit, or JSON export) for anything you add.
+- Be blunt about risks and when you offer suggestions ensure they're also blunt,
+- Ask for confirmation before making changes that run code or change multiple files.
+- Make statements actionable and specific; propose exact edits.
+- Request confirmation before applying changes that affect more than a single, clearly scoped line or file.
+- Ask the user to debug something for an actionable value if you're unsure.
+- Be sure to offer choices when appropriate.
+- Always understand the intent of the user's request and undo/redo as needed.
+- Above all, use the simplest possible code that meets the need so it can be easily audited and maintained.

.github/workflows/code_checks.yml

@@ -0,0 +1,41 @@
+name: Code checks
+on:
+  push:
+    branches:
+      - main
+    tags:
+      - '*.*.*'
+  pull_request:
+    branches:
+      - main
+
+jobs:
+  check-url-paths:
+    runs-on: ubuntu-latest
+
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v4
+
+      - name: Check for incorrect absolute '/php/' URLs in frontend code
+        run: |
+          echo "🔍 Checking for incorrect absolute '/php/' URLs (should be 'php/' or './php/')..."
+
+          MATCHES=$(grep -rE "['\"]\/php\/" --include=\*.{js,php,html} ./front | grep -E "\.get|\.post|\.ajax|fetch|url\s*:") || true
+
+          if [ -n "$MATCHES" ]; then
+            echo "$MATCHES"
+            echo "❌ Found incorrectly absolute '/php/' URLs. Use 'php/' or './php/' for relative paths."
+            exit 1
+          else
+            echo "✅ No bad '/php/' URLs found."
+          fi
+
+
+
+      - name: Check Python syntax
+        run: |
+          set -e
+          echo "🔍 Checking Python syntax..."
+          find . -name "*.py" -print0 | xargs -0 -n1 python3 -m py_compile
+

.github/workflows/docker_dev.yml

@@ -3,12 +3,12 @@ name: docker
 on:
   push:
     branches:
-      - '**'
+      - next_release
     tags:
       - '*.*.*'
   pull_request:
     branches:
-      - master
+      - next_release
 
 jobs:
   docker_dev:
@@ -20,6 +20,7 @@ jobs:
     if: >
       contains(github.event.head_commit.message, 'PUSHPROD') != 'True' &&
       github.repository == 'jokob-sk/NetAlertX'
+
     steps:
       - name: Checkout
         uses: actions/checkout@v4
@@ -30,6 +31,14 @@ jobs:
       - name: Set up Docker Buildx
         uses: docker/setup-buildx-action@v3
 
+      # --- Generate timestamped dev version
+      - name: Generate timestamp version
+        id: timestamp
+        run: |
+          ts=$(date -u +'%Y%m%d-%H%M%S')
+          echo "version=dev-${ts}" >> $GITHUB_OUTPUT
+          echo "Generated version: dev-${ts}"
+
       - name: Set up dynamic build ARGs
         id: getargs
         run: echo "version=$(cat ./stable/VERSION)" >> $GITHUB_OUTPUT
@@ -38,18 +47,20 @@ jobs:
         id: get_version
         run: echo "version=Dev" >> $GITHUB_OUTPUT
 
+      # --- Write the timestamped version to .VERSION file
       - name: Create .VERSION file
-        run: echo "${{ steps.get_version.outputs.version }}" >> .VERSION
+        run: echo "${{ steps.timestamp.outputs.version }}" > .VERSION
 
       - name: Docker meta
         id: meta
-        uses: docker/metadata-action@v4
+        uses: docker/metadata-action@v5
         with:
           images: |
             ghcr.io/jokob-sk/netalertx-dev
             jokobsk/netalertx-dev
           tags: |
             type=raw,value=latest
+            type=raw,value=${{ steps.timestamp.outputs.version }}
             type=ref,event=branch
             type=ref,event=pr
             type=semver,pattern={{version}}

.github/workflows/docker_prod.yml

@@ -6,7 +6,6 @@
 # GitHub recommends pinning actions to a commit SHA.
 # To get a newer version, you will need to update the SHA.
 # You can also reference a tag or branch, but the action may change without warning.
-
 name: Publish Docker image
 
 on:
@@ -14,6 +13,7 @@ on:
     types: [published]
     tags:
       - '*.[1-9]+[0-9]?.[1-9]+*'
+
 jobs:
   docker:
     runs-on: ubuntu-latest
@@ -21,6 +21,7 @@ jobs:
     permissions:
       contents: read
       packages: write
+
     steps:
       - name: Checkout
         uses: actions/checkout@v3
@@ -31,42 +32,39 @@ jobs:
       - name: Set up Docker Buildx
         uses: docker/setup-buildx-action@v3
 
-      - name: Set up dynamic build ARGs
-        id: getargs        
-        run: echo "version=$(cat ./stable/VERSION)" >> $GITHUB_OUTPUT
-
+      # --- Get release version from tag
       - name: Get release version
         id: get_version
-        run: echo "::set-output name=version::${GITHUB_REF#refs/tags/}"
+        run: echo "version=${GITHUB_REF#refs/tags/}" >> $GITHUB_OUTPUT
 
+      # --- Write version to .VERSION file
       - name: Create .VERSION file
-        run: echo "${{ steps.get_version.outputs.version }}" >> .VERSION
+        run: echo "${{ steps.get_version.outputs.version }}" > .VERSION
 
+      # --- Generate Docker metadata and tags
       - name: Docker meta
         id: meta
-        uses: docker/metadata-action@v4
+        uses: docker/metadata-action@v5
         with:
-          # list of Docker images to use as base name for tags
           images: |
             ghcr.io/jokob-sk/netalertx
             jokobsk/netalertx
-          # generate Docker tags based on the following events/attributes
           tags: |
-            type=semver,pattern={{version}},value=${{ inputs.version }}
-            type=semver,pattern={{major}}.{{minor}},value=${{ inputs.version }}
-            type=semver,pattern={{major}},value=${{ inputs.version }}
+            type=semver,pattern={{version}},value=${{ steps.get_version.outputs.version }}
+            type=semver,pattern={{major}}.{{minor}},value=${{ steps.get_version.outputs.version }}
+            type=semver,pattern={{major}},value=${{ steps.get_version.outputs.version }}
             type=ref,event=branch,suffix=-{{ sha }}
             type=ref,event=pr
             type=raw,value=latest,enable=${{ github.ref == 'refs/heads/main' || startsWith(github.ref, 'refs/tags/') }}
 
-      - name: Log in to Github Container registry
+      - name: Log in to Github Container Registry (GHCR)
         uses: docker/login-action@v3
         with:
           registry: ghcr.io
           username: jokob-sk
           password: ${{ secrets.GITHUB_TOKEN }}
 
-      - name: Login to DockerHub
+      - name: Log in to DockerHub
         if: github.event_name != 'pull_request'
         uses: docker/login-action@v3
         with:
@@ -81,6 +79,5 @@ jobs:
           push: ${{ github.event_name != 'pull_request' }}
           tags: ${{ steps.meta.outputs.tags }}
           labels: ${{ steps.meta.outputs.labels }}
-          # # ⚠ disable cache if build is failing to download debian packages
           # cache-from: type=registry,ref=ghcr.io/jokob-sk/netalertx:buildcache
           # cache-to: type=registry,ref=ghcr.io/jokob-sk/netalertx:buildcache,mode=max

.github/workflows/docker_rewrite.yml

@@ -0,0 +1,81 @@
+name: docker
+
+on:
+  push:
+    branches:
+      - rewrite
+    tags:
+      - '*.*.*'
+  pull_request:
+    branches:
+      - rewrite
+
+jobs: 
+  docker_rewrite:
+    runs-on: ubuntu-latest
+    timeout-minutes: 30
+    permissions:
+      contents: read
+      packages: write
+    if: >
+      contains(github.event.head_commit.message, 'PUSHPROD') != 'True' &&
+      github.repository == 'jokob-sk/NetAlertX'  
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v4
+
+      - name: Set up QEMU
+        uses: docker/setup-qemu-action@v3
+
+      - name: Set up Docker Buildx
+        uses: docker/setup-buildx-action@v3
+
+      - name: Set up dynamic build ARGs
+        id: getargs        
+        run: echo "version=$(cat ./stable/VERSION)" >> $GITHUB_OUTPUT
+
+      - name: Get release version
+        id: get_version
+        run: echo "version=Dev" >> $GITHUB_OUTPUT
+
+      - name: Create .VERSION file
+        run: echo "${{ steps.get_version.outputs.version }}" >> .VERSION
+
+      - name: Docker meta
+        id: meta
+        uses: docker/metadata-action@v5
+        with:
+          images: |
+            ghcr.io/jokob-sk/netalertx-dev-rewrite
+            jokobsk/netalertx-dev-rewrite
+          tags: |
+            type=raw,value=latest
+            type=ref,event=branch
+            type=ref,event=pr
+            type=semver,pattern={{version}}
+            type=semver,pattern={{major}}.{{minor}}
+            type=semver,pattern={{major}}
+            type=sha
+
+      - name: Log in to Github Container Registry (GHCR)
+        uses: docker/login-action@v3
+        with:
+          registry: ghcr.io
+          username: jokob-sk
+          password: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Log in to DockerHub
+        if: github.event_name != 'pull_request'
+        uses: docker/login-action@v3
+        with:
+          username: ${{ secrets.DOCKERHUB_USERNAME }}
+          password: ${{ secrets.DOCKERHUB_TOKEN }}
+
+      - name: Build and push
+        uses: docker/build-push-action@v3
+        with:
+          context: .
+          platforms: linux/amd64,linux/arm64,linux/arm/v7,linux/arm/v6
+          push: ${{ github.event_name != 'pull_request' }}
+          tags: ${{ steps.meta.outputs.tags }}
+          labels: ${{ steps.meta.outputs.labels }}

.github/workflows/label-issues.yml

@@ -0,0 +1,43 @@
+name: Label Issues by Installation Type
+
+on:
+  issues:
+    types: [opened]
+
+permissions:
+  issues: write
+
+jobs:
+  add-label:
+    runs-on: ubuntu-latest
+    steps:
+      - name: Get issue content
+        uses: actions/github-script@v7
+        with:
+          script: |
+            const body = context.payload.issue.body;
+
+            const lowerBody = body.toLowerCase();
+
+            let labelsToAdd = [];
+
+            if (lowerBody.includes('bare-metal')) {
+              labelsToAdd.push('bare-metal ❗');
+            }
+
+            if (lowerBody.includes('home assistant')) {
+              labelsToAdd.push('Home Assistant 🏠');
+            }
+
+            if (lowerBody.includes('production (netalertx)') || lowerBody.includes('dev (netalertx-dev)')) {
+              labelsToAdd.push('Docker 🐋');
+            }
+
+            if (labelsToAdd.length > 0) {
+              await github.rest.issues.addLabels({
+                owner: context.repo.owner,
+                repo: context.repo.repo,
+                issue_number: context.issue.number,
+                labels: labelsToAdd
+              });
+            }

.github/workflows/social_post_on_release.yml

@@ -1,4 +1,4 @@
-name: 📧 Twitter and Discord Posts
+name: 📧 Social Posts
 on:
   release:
     types: [published]
@@ -16,28 +16,3 @@ jobs:
           -d '{"content": "🎉 New release: **${{ github.event.release.name }}** is live! 🚀\nCheck it out here: ${{ github.event.release.html_url }}"}' \
           ${{ secrets.DISCORD_WEBHOOK_URL }}
 
-  post-twitter:
-    runs-on: ubuntu-latest
-    steps:
-      - name: Wait for 15 minutes
-        run: sleep 900  # 15 minutes delay     
-
-      - name: Checkout repository
-        uses: actions/checkout@v3
-
-      - name: Create tweet file
-        run: |
-          echo "🎉 New release: **${{ github.event.release.name }}** is live! 🚀" > .github/tweet.md
-          echo "Check it out here: ${{ github.event.release.html_url }}" >> .github/tweet.md
-          git add .github/tweet.md
-          git commit -m "Add release tweet for ${{ github.event.release.name }}"
-          git push
-
-      - name: Tweet
-        uses: twitter-together/action@v3
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-          TWITTER_ACCESS_TOKEN: ${{ secrets.TWITTER_ACCESS_TOKEN }}
-          TWITTER_ACCESS_TOKEN_SECRET: ${{ secrets.TWITTER_ACCESS_TOKEN_SECRET }}
-          TWITTER_API_KEY: ${{ secrets.TWITTER_API_KEY }}
-          TWITTER_API_SECRET_KEY: ${{ secrets.TWITTER_API_SECRET_KEY }}

.gitignore

@@ -1,6 +1,16 @@
+.coverage
 .vscode
+.dotnet
+.vscode-server
+.gitconfig
+.*CommandMarker
+deviceid
 .DS_Store
+.cache
+nohup.out
 config/*
+.ash_history
+.VERSION
 config/pialert.conf
 config/app.conf
 db/*
@@ -8,6 +18,7 @@ db/pialert.db
 db/app.db
 front/log/*
 /log/*
+/log/plugins/*
 front/api/*
 /api/*
 **/plugins/**/*.log

.vscode/launch.json

@@ -0,0 +1,42 @@
+{
+    "version": "0.2.0",
+    "configurations": [
+        {
+            "name": "Python Backend Debug: Attach",
+            "type": "debugpy",
+            "request": "attach",
+            "connect": {
+                "host": "localhost",
+                "port": 5678
+            },
+            "pathMappings": [
+                {
+                    // Map workspace root to /app for PHP and other resources, plus explicit server mapping for Python.
+                    "localRoot": "${workspaceFolder}",
+                    "remoteRoot": "/app"
+                },
+                {
+                    "localRoot": "${workspaceFolder}/server",
+                    "remoteRoot": "/app/server"
+                }
+            ]
+        },
+        {
+            "name": "PHP Frontend Xdebug: Listen",
+            "type": "php",
+            "request": "launch",
+            "port": 9003,
+            "pathMappings": {
+                "/app": "${workspaceFolder}"
+            }
+        },
+        {
+            "name": "Python: Current File",
+            "type": "debugpy",
+            "request": "launch",
+            "program": "${file}",
+            "console": "integratedTerminal",
+            "justMyCode": true
+        }
+    ]
+}

.vscode/settings.json

@@ -0,0 +1,33 @@
+{
+    "terminal.integrated.suggest.enabled": true,
+    // Use pytest and look under the test/ folder
+    "python.testing.pytestEnabled": true,
+    "python.testing.unittestEnabled": false,
+    "python.testing.pytestArgs": [
+        "test"
+    ],
+    // Ensure VS Code uses the devcontainer virtualenv
+    "python.defaultInterpreterPath": "/opt/venv/bin/python",
+    // Let the Python extension invoke pytest via the interpreter; avoid hardcoded paths
+    // Removed python.testing.pytestPath and legacy pytest.command overrides
+    
+    "terminal.integrated.defaultProfile.linux": "zsh",
+    "terminal.integrated.profiles.linux": {
+      "zsh": {
+        "path": "/bin/zsh"
+      }
+    }
+    ,
+    // Fallback for older VS Code versions or schema validators that don't accept custom profiles
+    "terminal.integrated.shell.linux": "/usr/bin/zsh"
+  ,
+  "python.linting.flake8Enabled": true,
+  "python.linting.enabled": true,
+  "python.linting.flake8Args": [
+    "--config=.flake8"
+  ],
+  "python.formatting.provider": "black",
+  "python.formatting.blackArgs": [
+    "--line-length=180"
+  ]
+}

.vscode/tasks.json

@@ -0,0 +1,238 @@
+{
+  "version": "2.0.0",
+  "inputs": [
+    {
+      "id": "confirmPrune",
+      "type": "promptString",
+      "description": "DANGER! Type YES to confirm pruning all unused Docker resources. This will destroy containers, images, volumes, and networks!",
+      "default": ""
+    }
+  ],
+  "tasks": [
+    {
+      "label": "[Any POSIX] Generate Devcontainer Configs",
+      "type": "shell",
+      "command": ".devcontainer/scripts/generate-configs.sh",
+      "detail": "Generates devcontainer configs from the template. This must be run after changes to devcontainer to combine/merge them into the final config used by VS Code. Note- this has no bearing on the production or test image.",
+      "presentation": {
+        "echo": true,
+        "reveal": "always",
+        "panel": "shared",
+        "showReuseMessage": false,
+        "group": "POSIX Tasks"
+      },
+      
+      "problemMatcher": [],
+      "group": {
+        "kind": "build",
+        "isDefault": false
+      },
+      "icon": {
+        "id": "tools",
+        "color": "terminal.ansiYellow"
+      }
+    },
+    {
+      "label": "[Any] Docker system and build Prune",
+      "type": "shell",
+      "command": ".devcontainer/scripts/confirm-docker-prune.sh",
+      "detail": "DANGER! Prunes all unused Docker resources (images, containers, volumes, networks). Any stopped container will be wiped and data will be lost.  Use with caution.",
+      "options": {
+        "env": {
+          "CONFIRM_PRUNE": "${input:confirmPrune}"
+        }
+      },
+      "presentation": {
+        "echo": true,
+        "reveal": "always",
+        "panel": "shared",
+        "showReuseMessage": false,
+        "group": "Any"
+      },
+      "problemMatcher": [],
+      "group": {
+        "kind": "build",
+        "isDefault": false
+      },
+      "icon": {
+        "id": "trash",
+        "color": "terminal.ansiRed"
+      }
+    },
+    {
+      "label": "[Dev Container] Re-Run Startup Script",
+      "type": "shell",
+      "command": "./isDevContainer.sh || exit 1;/workspaces/NetAlertX/.devcontainer/scripts/setup.sh",
+      "detail": "The startup script runs directly after the container is started. It reprovisions permissions, links folders, and performs other setup tasks. Run this if you have made changes to the setup script or need to reprovision the container.",
+      "options": {
+        "cwd": "/workspaces/NetAlertX/.devcontainer/scripts"
+      },
+      "presentation": {
+        "echo": true,
+        "reveal": "always",
+        "panel": "shared",
+        "showReuseMessage": false
+      },
+
+      "problemMatcher": [],
+      "icon": {
+        "id": "beaker",
+        "color": "terminal.ansiBlue"
+      }
+    },
+    {
+      "label": "[Dev Container] Start Backend (Python)",
+      "type": "shell",
+      "command": "./isDevContainer.sh || exit 1; /services/start-backend.sh",
+      "detail": "Restarts the NetAlertX backend (Python) service in the dev container. This may take 5 seconds to be completely ready.",
+      "options": {
+        "cwd": "/workspaces/NetAlertX/.devcontainer/scripts"
+      },
+      "presentation": {
+        "echo": true,
+        "reveal": "always",
+        "panel": "shared",
+        "showReuseMessage": false,
+        "clear": false,
+        "group": "Devcontainer"
+      },
+      "problemMatcher": [],
+      "icon": {
+        "id": "debug-restart",
+        "color": "terminal.ansiGreen"
+      }
+    },
+    {
+      "label": "[Dev Container] Start CronD (Scheduler)",
+      "type": "shell",
+      "command": "./isDevContainer.sh || exit 1; /services/start-crond.sh",
+      "detail": "Stops and restarts the crond service.",
+      "options": {
+        "cwd": "/workspaces/NetAlertX/.devcontainer/scripts"
+      },
+      "presentation": {
+        "echo": true,
+        "reveal": "always",
+        "panel": "shared",
+        "showReuseMessage": false,
+        "clear": false,
+        "group": "Devcontainer"
+      },
+      "problemMatcher": [],
+      "icon": {
+        "id": "debug-restart",
+        "color": "terminal.ansiGreen"
+      }
+    },
+    {
+      "label": "[Dev Container] Start Frontend (nginx and PHP-FPM)",
+      "type": "shell",
+      "command": "./isDevContainer.sh || exit 1; /services/start-php-fpm.sh & /services/start-nginx.sh  &",
+      "detail": "Stops and restarts the NetAlertX frontend services (nginx and PHP-FPM) in the dev container. This launches almost instantly.",
+      "options": {
+        "cwd": "/workspaces/NetAlertX/.devcontainer/scripts"
+
+      },
+      "presentation": {
+        "echo": true,
+        "reveal": "always",
+        "panel": "shared",
+        "showReuseMessage": false,
+        "clear": false,
+        "group": "Devcontainer"
+      },
+      "problemMatcher": [],
+      "icon": {
+        "id": "debug-restart",
+        "color": "terminal.ansiGreen"
+      }
+    },
+    {
+      "label": "[Dev Container] Stop Frontend & Backend Services",
+      "type": "shell",
+      "command": "./isDevContainer.sh || exit 1; pkill -f 'php-fpm83|nginx|crond|python3' || true",
+      "detail": "Stops all NetAlertX services running in the dev container.",
+      "options": {
+        "cwd": "/workspaces/NetAlertX/.devcontainer/scripts"
+      },
+      "presentation": {
+        "echo": true,
+        "reveal": "always",
+        "panel": "shared",
+        "showReuseMessage": false,
+        "group": "Devcontainer"
+      },
+      "problemMatcher": [],
+      "icon": {
+        "id": "debug-stop",
+        "color": "terminal.ansiRed"
+      }
+    },
+    {
+      "label": "[Any] Build Unit Test Docker image",
+      "type": "shell",
+      "command": "docker buildx build -t netalertx-test . && echo '🧪 Unit Test Docker image built: netalertx-test'",
+      "detail": "This must be run after changes to the container.  Unit testing will not register changes until after this image is rebuilt. It takes about 30 seconds to build unless changes to the venv stage are made. venv takes 90s alone.",
+      "presentation": {
+        "echo": true,
+        "reveal": "always",
+        "panel": "shared",
+        "showReuseMessage": false,
+        "group": "Any"
+
+      },
+      "problemMatcher": [],
+      "group": {
+        "kind": "build",
+        "isDefault": false
+      },
+      "icon": {
+        "id": "beaker",
+        "color": "terminal.ansiBlue"
+      }
+    },
+    {
+      "label": "[Dev Container] Wipe and Regenerate Database",
+      "type": "shell",
+      "command": "killall 'python3' || true && sleep 1 && rm -rf /data/db/* /data/config/* && bash /entrypoint.d/15-first-run-config.sh && bash /entrypoint.d/20-first-run-db.sh && echo '✅ Database and config wiped and regenerated'",
+      "detail": "Wipes devcontainer db and config. Provides a fresh start in devcontainer, run this task, then run the Rerun Startup Task",
+      "options": {},
+      "presentation": {
+        "echo": true,
+        "reveal": "always",
+        "panel": "shared",
+        "showReuseMessage": false,
+        "group": "Devcontainer"
+      },
+      "problemMatcher": [],
+      "icon": {
+        "id": "database",
+        "color": "terminal.ansiRed"
+      }
+    },
+    {
+      "label": "Build & Launch Prodcution Docker Container",
+      "type": "shell",
+      "command": "docker compose up -d --build --force-recreate",
+      "detail": "Before launching, ensure VSCode Ports are closed and services are stopped. Tasks: Stop Frontend & Backend Services & Remote: Close Unused Forwarded Ports to ensure proper operation of the new container.",
+      "options": {
+        "cwd": "/workspaces/NetAlertX"
+      },
+      "presentation": {
+        "echo": true,
+        "reveal": "always",
+        "panel": "shared",
+        "showReuseMessage": false
+      },
+      "problemMatcher": [],
+      "group": {
+        "kind": "build",
+        "isDefault": false
+      },
+      "icon": {
+        "id": "package",
+        "color": "terminal.ansiBlue"
+      }
+    }
+  ]
+}

CODE_OF_CONDUCT.md

@@ -0,0 +1,137 @@
+
+# Contributor Covenant Code of Conduct
+
+## Our Pledge
+
+We as members, contributors, and leaders pledge to make participation in our
+community a harassment-free experience for everyone, regardless of age, body
+size, visible or invisible disability, ethnicity, sex characteristics, gender
+identity and expression, level of experience, education, socio-economic status,
+nationality, personal appearance, race, caste, color, religion, or sexual
+identity and orientation.
+
+We pledge to act and interact in ways that contribute to an open, welcoming,
+diverse, inclusive, and healthy community.
+
+## Our Standards
+
+Examples of behavior that contributes to a positive environment for our
+community include:
+
+- Demonstrating empathy and kindness toward other people
+- Being respectful of differing opinions, viewpoints, and experiences
+- Giving and gracefully accepting constructive feedback
+- Accepting responsibility and apologizing to those affected by our mistakes,
+  and learning from the experience
+- Focusing on what is best not just for us as individuals, but for the overall
+  community
+
+Examples of unacceptable behavior include:
+
+- The use of sexualized language or imagery, and sexual attention or advances of
+  any kind
+- Trolling, insulting or derogatory comments, and personal or political attacks
+- Public or private harassment
+- Publishing others' private information, such as a physical or email address,
+  without their explicit permission
+- Other conduct which could reasonably be considered inappropriate in a
+  professional setting
+
+## Enforcement Responsibilities
+
+Community leaders are responsible for clarifying and enforcing our standards of
+acceptable behavior and will take appropriate and fair corrective action in
+response to any behavior that they deem inappropriate, threatening, offensive,
+or harmful.
+
+Community leaders have the right and responsibility to remove, edit, or reject
+comments, commits, code, wiki edits, issues, and other contributions that are
+not aligned to this Code of Conduct, and will communicate reasons for moderation
+decisions when appropriate.
+
+## Scope
+
+This Code of Conduct applies within all community spaces, and also applies when
+an individual is officially representing the community in public spaces.
+Examples of representing our community include using an official email address,
+posting via an official social media account, or acting as an appointed
+representative at an online or offline event.
+
+## Enforcement
+
+Instances of abusive, harassing, or otherwise unacceptable behavior may be
+reported to the community leaders responsible for enforcement at <jokob@duck.com>.
+All complaints will be reviewed and investigated promptly and fairly.
+
+All community leaders are obligated to respect the privacy and security of the
+reporter of any incident.
+
+## Ethical Use Clause (Project-Specific)
+
+While NetAlertX is a tool designed to empower users with greater insight into their own networks, we expect and encourage all users to use this software **ethically and legally**.
+
+- Do not use this software to scan or monitor networks without **explicit authorization**.
+- Respect privacy, consent, and data protection laws applicable in your jurisdiction.
+- Any use of NetAlertX for malicious surveillance, stalking, or unauthorized access is explicitly discouraged and may be grounds for removal from the community and revocation of support.
+
+We reserve the right to take appropriate action to uphold the ethical integrity of this project.
+
+## Enforcement Guidelines
+
+Community leaders will follow these Community Impact Guidelines in determining
+the consequences for any action they deem in violation of this Code of Conduct:
+
+### 1. Correction
+
+**Community Impact**: Use of inappropriate language or other behavior deemed
+unprofessional or unwelcome in the community.
+
+**Consequence**: A private, written warning from community leaders, providing
+clarity around the nature of the violation and an explanation of why the
+behavior was inappropriate. A public apology may be requested.
+
+### 2. Warning
+
+**Community Impact**: A violation through a single incident or series of
+actions.
+
+**Consequence**: A warning with consequences for continued behavior. No
+interaction with the people involved, including unsolicited interaction with
+those enforcing the Code of Conduct, for a specified period of time. This
+includes avoiding interactions in community spaces as well as external channels
+like social media. Violating these terms may lead to a temporary or permanent
+ban.
+
+### 3. Temporary Ban
+
+**Community Impact**: A serious violation of community standards, including
+sustained inappropriate behavior.
+
+**Consequence**: A temporary ban from any sort of interaction or public
+communication with the community for a specified period of time. No public or
+private interaction with the people involved, including unsolicited interaction
+with those enforcing the Code of Conduct, is allowed during this period.
+Violating these terms may lead to a permanent ban.
+
+### 4. Permanent Ban
+
+**Community Impact**: Demonstrating a pattern of violation of community
+standards, including sustained inappropriate behavior, harassment of an
+individual, or aggression toward or disparagement of classes of individuals.
+
+**Consequence**: A permanent ban from any sort of public interaction within the
+community.
+
+## Attribution
+
+This Code of Conduct is adapted from the
+[Contributor Covenant](https://www.contributor-covenant.org/), version 2.1,
+available at
+<https://www.contributor-covenant.org/version/2/1/code_of_conduct/>.
+
+Community Impact Guidelines were inspired by
+[Mozilla's code of conduct enforcement ladder](https://github.com/mozilla/inclusion).
+
+For answers to common questions about this code of conduct, see the FAQ at
+<https://www.contributor-covenant.org/faq/>. Translations are available at
+<https://www.contributor-covenant.org/translations/>.

CONTRIBUTING

@@ -1,14 +0,0 @@
-# Contributing to this project
-
-## Issues, bugs, feature requests
-
-The issue tracker is the preferred channel for bug reports, features requests and submitting pull requests.
-
-Before submitting a new issue please spend a couple of minutes on research:
-
-* Check [🛑 Common issues](https://github.com/jokob-sk/NetAlertX/blob/main/docs/DEBUG_TIPS.md#common-issues) 
-* Check [💡 Closed issues](https://github.com/jokob-sk/NetAlertX/issues?q=is%3Aissue+is%3Aclosed) if a similar issue was solved in the past.
-
-## Pull-requests (PRs)
-
-If you submit a PR please do check that your changes are backward compatible with existing installations. Existing features should be always preserved.

CONTRIBUTING.md

@@ -0,0 +1,53 @@
+# 🤝 Contributing to NetAlertX
+
+First off, **thank you** for taking the time to contribute! NetAlertX is built and improved with the help of passionate people like you.
+
+---
+
+## 📂 Issues, Bugs, and Feature Requests
+
+Please use the [GitHub Issue Tracker](https://github.com/jokob-sk/NetAlertX/issues) for:
+- Bug reports 🐞
+- Feature requests 💡
+- Documentation feedback 📖
+
+Before opening a new issue:
+- 🛑 [Check Common Issues & Debug Tips](https://github.com/jokob-sk/NetAlertX/blob/main/docs/DEBUG_TIPS.md#common-issues)
+- 🔍 [Search Closed Issues](https://github.com/jokob-sk/NetAlertX/issues?q=is%3Aissue+is%3Aclosed)
+
+---
+
+## 🚀 Submitting Pull Requests (PRs)
+
+We welcome PRs to improve the code, docs, or UI!
+
+Please:
+- Ensure **backward compatibility** with existing installations
+- Preserve existing features unless a breaking change is intentional and discussed
+- Follow existing **code style and structure**
+- Provide a clear title and description for your PR
+- If relevant, add or update tests and documentation
+- For plugins, refer to the [Plugin Dev Guide](https://github.com/jokob-sk/NetAlertX/blob/main/docs/PLUGINS_DEV.md)
+
+---
+
+## 🌟 First-Time Contributors
+
+New to open source? Check out these resources:
+- [How to Fork and Submit a PR](https://opensource.guide/how-to-contribute/)
+- Ask questions or get support in our [Discord](https://discord.gg/NczTUTWyRr)
+
+---
+
+## 🔐 Code of Conduct
+
+By participating, you agree to follow our [Code of Conduct](./CODE_OF_CONDUCT.md), which ensures a respectful and welcoming community.
+
+---
+
+## 📬 Contact
+
+If you have more in-depth questions or want to discuss contributing in other ways, feel free to reach out at:  
+📧 [jokob@duck.com](mailto:jokob@duck.com?subject=NetAlertX%20Contribution)
+
+We appreciate every contribution, big or small! 💙

Dockerfile

@@ -1,63 +1,210 @@
-FROM alpine:3.21 AS builder
+# The NetAlertX Dockerfile has 3 stages:
+#
+# Stage 1. Builder - NetAlertX Requires special tools and packages to build our virtual environment, but
+# which are not needed in future stages.  We build the builder and extract the venv for runner to use as 
+# a base.
+#
+# Stage 2. Runner builds the bare minimum requirements to create an operational NetAlertX. The primary
+# reason for breaking at this stage is it leaves the system in a proper state for devcontainer operation
+# This image also provides a break-out point for uses who wish to execute the anti-pattern of using a 
+# docker container as a VM for experimentation and various development patterns.
+#
+# Stage 3. Hardened removes root, sudoers, folders, permissions, and locks the system down into a read-only
+# compatible image. While NetAlertX does require some read-write operations, this image can guarantee the 
+# code pushed out by the project is the only code which will run on the system after each container restart.
+# It reduces the chance of system hijacking and operates with all modern security protocols in place as is
+# expected from a security appliance.
+#
+# This file can be built with `docker-compose -f docker-compose.yml up --build --force-recreate`
+
+FROM alpine:3.22 AS builder
 
 ARG INSTALL_DIR=/app
 
 ENV PYTHONUNBUFFERED=1
+ENV PATH="/opt/venv/bin:$PATH"
 
 # Install build dependencies
+COPY requirements.txt /tmp/requirements.txt
 RUN apk add --no-cache bash shadow python3 python3-dev gcc musl-dev libffi-dev openssl-dev git \
     && python -m venv /opt/venv
 
-# Enable venv
-ENV PATH="/opt/venv/bin:$PATH"
+# Create virtual environment owned by root, but readable by everyone else. This makes it easy to copy 
+# into hardened stage without worrying about permissions and keeps image size small. Keeping the commands
+# together makes for a slightly smaller image size.
+RUN pip install -r /tmp/requirements.txt && \
+    chmod -R u-rwx,g-rwx /opt
 
-COPY . ${INSTALL_DIR}/
-
-RUN pip install openwrt-luci-rpc asusrouter asyncio aiohttp graphene flask tplink-omada-client wakeonlan pycryptodome requests paho-mqtt scapy cron-converter pytz json2table dhcp-leases pyunifi speedtest-cli chardet python-nmap dnspython librouteros git+https://github.com/foreign-sub/aiofreepybox.git \
-    && bash -c "find ${INSTALL_DIR} -type d -exec chmod 750 {} \;" \
-    && bash -c "find ${INSTALL_DIR} -type f -exec chmod 640 {} \;" \
-    && bash -c "find ${INSTALL_DIR} -type f \( -name '*.sh' -o -name '*.py'  -o -name 'speedtest-cli' \) -exec chmod 750 {} \;"
-
-# Append Iliadbox certificate to aiofreepybox
-RUN cat ${INSTALL_DIR}/install/freebox_certificate.pem >> /opt/venv/lib/python3.12/site-packages/aiofreepybox/freebox_certificates.pem
-
-# second stage
-FROM alpine:3.21 AS runner
+# second stage is the main runtime stage with just the minimum required to run the application
+# The runner is used for both devcontainer, and as a base for the hardened stage.
+FROM alpine:3.22 AS runner
 
 ARG INSTALL_DIR=/app
 
-COPY --from=builder /opt/venv /opt/venv
-COPY --from=builder /usr/sbin/usermod /usr/sbin/groupmod /usr/sbin/
+# NetAlertX app directories
+ENV NETALERTX_APP=${INSTALL_DIR}
+ENV NETALERTX_DATA=/data
+ENV NETALERTX_CONFIG=${NETALERTX_DATA}/config
+ENV NETALERTX_FRONT=${NETALERTX_APP}/front
+ENV NETALERTX_PLUGINS=${NETALERTX_FRONT}/plugins
+ENV NETALERTX_SERVER=${NETALERTX_APP}/server
+ENV NETALERTX_API=/tmp/api
+ENV NETALERTX_DB=${NETALERTX_DATA}/db
+ENV NETALERTX_DB_FILE=${NETALERTX_DB}/app.db
+ENV NETALERTX_BACK=${NETALERTX_APP}/back
+ENV NETALERTX_LOG=/tmp/log
+ENV NETALERTX_PLUGINS_LOG=${NETALERTX_LOG}/plugins
+ENV NETALERTX_CONFIG_FILE=${NETALERTX_CONFIG}/app.conf
 
-# Enable venv
-ENV PATH="/opt/venv/bin:$PATH" 
+# NetAlertX log files
+ENV LOG_IP_CHANGES=${NETALERTX_LOG}/IP_changes.log
+ENV LOG_APP=${NETALERTX_LOG}/app.log
+ENV LOG_APP_FRONT=${NETALERTX_LOG}/app_front.log
+ENV LOG_REPORT_OUTPUT_TXT=${NETALERTX_LOG}/report_output.txt
+ENV LOG_DB_IS_LOCKED=${NETALERTX_LOG}/db_is_locked.log
+ENV LOG_REPORT_OUTPUT_HTML=${NETALERTX_LOG}/report_output.html
+ENV LOG_STDERR=${NETALERTX_LOG}/stderr.log
+ENV LOG_APP_PHP_ERRORS=${NETALERTX_LOG}/app.php_errors.log
+ENV LOG_EXECUTION_QUEUE=${NETALERTX_LOG}/execution_queue.log
+ENV LOG_REPORT_OUTPUT_JSON=${NETALERTX_LOG}/report_output.json
+ENV LOG_STDOUT=${NETALERTX_LOG}/stdout.log
+ENV LOG_CROND=${NETALERTX_LOG}/crond.log
+ENV LOG_NGINX_ERROR=${NETALERTX_LOG}/nginx-error.log
 
-# default port and listen address
-ENV PORT=20211 LISTEN_ADDR=0.0.0.0 
+# System Services configuration files
+ENV ENTRYPOINT_CHECKS=/entrypoint.d
+ENV SYSTEM_SERVICES=/services
+ENV SYSTEM_SERVICES_SCRIPTS=${SYSTEM_SERVICES}/scripts
+ENV SYSTEM_SERVICES_CONFIG=${SYSTEM_SERVICES}/config
+ENV SYSTEM_NGINX_CONFIG=${SYSTEM_SERVICES_CONFIG}/nginx
+ENV SYSTEM_NGINX_CONFIG_FILE=${SYSTEM_NGINX_CONFIG}/nginx.conf
+ENV SYSTEM_SERVICES_ACTIVE_CONFIG=/tmp/nginx/active-config
+ENV SYSTEM_SERVICES_PHP_FOLDER=${SYSTEM_SERVICES_CONFIG}/php
+ENV SYSTEM_SERVICES_PHP_FPM_D=${SYSTEM_SERVICES_PHP_FOLDER}/php-fpm.d
+ENV SYSTEM_SERVICES_CROND=${SYSTEM_SERVICES_CONFIG}/crond
+ENV SYSTEM_SERVICES_RUN=/tmp/run
+ENV SYSTEM_SERVICES_RUN_TMP=${SYSTEM_SERVICES_RUN}/tmp
+ENV SYSTEM_SERVICES_RUN_LOG=${SYSTEM_SERVICES_RUN}/logs
+ENV PHP_FPM_CONFIG_FILE=${SYSTEM_SERVICES_PHP_FOLDER}/php-fpm.conf
+ENV READ_ONLY_FOLDERS="${NETALERTX_BACK} ${NETALERTX_FRONT} ${NETALERTX_SERVER} ${SYSTEM_SERVICES} \
+                       ${SYSTEM_SERVICES_CONFIG} ${ENTRYPOINT_CHECKS}"
+ENV READ_WRITE_FOLDERS="${NETALERTX_DATA} ${NETALERTX_CONFIG} ${NETALERTX_DB} ${NETALERTX_API} \
+                       ${NETALERTX_LOG} ${NETALERTX_PLUGINS_LOG} ${SYSTEM_SERVICES_RUN} \
+                       ${SYSTEM_SERVICES_RUN_TMP} ${SYSTEM_SERVICES_RUN_LOG} \
+                       ${SYSTEM_SERVICES_ACTIVE_CONFIG}"
 
-# needed for s6-overlay
-ENV S6_CMD_WAIT_FOR_SERVICES_MAXTIME=0
+#Python environment
+ENV PYTHONUNBUFFERED=1 
+ENV VIRTUAL_ENV=/opt/venv
+ENV VIRTUAL_ENV_BIN=/opt/venv/bin
+ENV PYTHONPATH=${NETALERTX_APP}:${NETALERTX_SERVER}:${NETALERTX_PLUGINS}:${VIRTUAL_ENV}/lib/python3.12/site-packages
+ENV PATH="${SYSTEM_SERVICES}:${VIRTUAL_ENV_BIN}:$PATH" 
 
-# ❗ IMPORTANT - if you modify this file modify the /install/install_dependecies.sh file as well ❗ 
+# App Environment
+ENV LISTEN_ADDR=0.0.0.0
+ENV PORT=20211
+ENV NETALERTX_DEBUG=0
+ENV VENDORSPATH=/app/back/ieee-oui.txt
+ENV VENDORSPATH_NEWEST=${SYSTEM_SERVICES_RUN_TMP}/ieee-oui.txt
+ENV ENVIRONMENT=alpine
+ENV READ_ONLY_USER=readonly READ_ONLY_GROUP=readonly
+ENV NETALERTX_USER=netalertx NETALERTX_GROUP=netalertx
+ENV LANG=C.UTF-8 
 
-RUN apk update --no-cache \
-    && apk add --no-cache bash libbsd zip lsblk gettext-envsubst sudo mtr tzdata s6-overlay \
-    && apk add --no-cache curl arp-scan iproute2 iproute2-ss nmap nmap-scripts traceroute nbtscan avahi avahi-tools openrc dbus net-tools net-snmp-tools bind-tools awake ca-certificates \
-    && apk add --no-cache sqlite php83 php83-fpm php83-cgi php83-curl php83-sqlite3 php83-session \
-    && apk add --no-cache python3 nginx \
-    && ln -s /usr/bin/awake /usr/bin/wakeonlan \
-    && bash -c "install -d -m 750 -o nginx -g www-data ${INSTALL_DIR} ${INSTALL_DIR}" \
-    && rm -f /etc/nginx/http.d/default.conf
 
-COPY --from=builder --chown=nginx:www-data ${INSTALL_DIR}/ ${INSTALL_DIR}/
+RUN apk add --no-cache bash mtr libbsd zip lsblk tzdata curl arp-scan iproute2 iproute2-ss nmap \
+    nmap-scripts traceroute nbtscan net-tools net-snmp-tools bind-tools awake ca-certificates \
+    sqlite php83 php83-fpm php83-cgi php83-curl php83-sqlite3 php83-session python3 envsubst \
+    nginx shadow && \
+    rm -Rf /var/cache/apk/*  && \
+    rm -Rf /etc/nginx && \
+    addgroup -g 20211 ${NETALERTX_GROUP} && \
+    adduser -u 20211 -D -h ${NETALERTX_APP} -G ${NETALERTX_GROUP} ${NETALERTX_USER} && \
+    apk del shadow
 
-# Add crontab file
-COPY --chmod=600 --chown=root:root install/crontab /etc/crontabs/root
 
-# Start all required services
-RUN ${INSTALL_DIR}/dockerfiles/start.sh
 
-HEALTHCHECK --interval=30s --timeout=5s --start-period=15s --retries=2 \
-    CMD curl -sf -o /dev/null ${LISTEN_ADDR}:${PORT}/php/server/query_json.php?file=app_state.json
+# Install application, copy files, set permissions
+COPY --chown=${NETALERTX_USER}:${NETALERTX_GROUP} install/production-filesystem/ /
+COPY --chown=${NETALERTX_USER}:${NETALERTX_GROUP} --chmod=755 back ${NETALERTX_BACK}
+COPY --chown=${NETALERTX_USER}:${NETALERTX_GROUP} --chmod=755 front ${NETALERTX_FRONT}
+COPY --chown=${NETALERTX_USER}:${NETALERTX_GROUP} --chmod=755 server ${NETALERTX_SERVER}
+
+# Create required folders with correct ownership and permissions
+RUN install -d -o ${NETALERTX_USER} -g ${NETALERTX_GROUP} -m 700 ${READ_WRITE_FOLDERS} && \
+    sh -c "find ${NETALERTX_APP} -type f \( -name '*.sh' -o -name 'speedtest-cli' \) \
+    -exec chmod 750 {} \;"
+
+# Copy version information into the image
+COPY --chown=${NETALERTX_USER}:${NETALERTX_GROUP} .VERSION ${NETALERTX_APP}/.VERSION
+
+# Copy the virtualenv from the builder stage
+COPY --from=builder --chown=20212:20212 ${VIRTUAL_ENV} ${VIRTUAL_ENV}
+
+
+# Initialize each service with the dockerfiles/init-*.sh scripts, once.
+# This is done after the copy of the venv to ensure the venv is in place
+# although it may be quicker to do it before the copy, it keeps the image
+# layers smaller to do it after.
+RUN apk add libcap && \
+    setcap cap_net_raw+ep /bin/busybox && \
+    setcap cap_net_raw,cap_net_admin+eip /usr/bin/nmap && \
+    setcap cap_net_raw,cap_net_admin+eip /usr/bin/arp-scan && \
+    setcap cap_net_raw,cap_net_admin,cap_net_bind_service+eip /usr/bin/nbtscan && \
+    setcap cap_net_raw,cap_net_admin+eip /usr/bin/traceroute && \
+    setcap cap_net_raw,cap_net_admin+eip $(readlink -f ${VIRTUAL_ENV_BIN}/python) && \
+    /bin/sh /build/init-nginx.sh && \
+    /bin/sh /build/init-php-fpm.sh && \
+    /bin/sh /build/init-crond.sh && \
+    /bin/sh /build/init-backend.sh && \
+    rm -rf /build && \
+    apk del libcap && \
+    date +%s > ${NETALERTX_FRONT}/buildtimestamp.txt
+
+
+ENTRYPOINT ["/bin/sh","/entrypoint.sh"]
+
+# Final hardened stage to improve security by setting least possible permissions and removing sudo access.
+# When complete, if the image is compromised, there's not much that can be done with it.
+# This stage is separate from Runner stage so that devcontainer can use the Runner stage.
+FROM runner AS hardened
+
+ENV UMASK=0077
+
+# Create readonly user and group with no shell access.
+# Readonly user marks folders that are created by NetAlertX, but should not be modified.
+# AI may claim this is stupid, but it's actually least possible permissions as 
+# read-only user cannot login, cannot sudo, has no write permission, and cannot even
+# read the files it owns. The read-only user is ownership-as-a-lock hardening pattern.
+RUN addgroup -g 20212 ${READ_ONLY_GROUP} && \
+    adduser -u 20212 -G ${READ_ONLY_GROUP} -D -h /app ${READ_ONLY_USER}
+
+
+# reduce permissions to minimum necessary for all NetAlertX files and folders
+# Permissions 005 and 004 are not typos, they enable read-only. Everyone can
+# read the read-only files, and nobody can write to them, even the readonly user.
+RUN chown -R ${READ_ONLY_USER}:${READ_ONLY_GROUP} ${READ_ONLY_FOLDERS} && \
+    chmod -R 004 ${READ_ONLY_FOLDERS} && \
+    find ${READ_ONLY_FOLDERS} -type d -exec chmod 005 {} + && \
+    install -d -o ${NETALERTX_USER} -g ${NETALERTX_GROUP} -m 700 ${READ_WRITE_FOLDERS} && \
+    chown -R ${NETALERTX_USER}:${NETALERTX_GROUP} ${READ_WRITE_FOLDERS} && \
+    chmod -R 600 ${READ_WRITE_FOLDERS} && \
+    find ${READ_WRITE_FOLDERS} -type d -exec chmod 700 {} + && \
+    chown ${READ_ONLY_USER}:${READ_ONLY_GROUP} /entrypoint.sh /opt /opt/venv && \
+    chmod 005 /entrypoint.sh ${SYSTEM_SERVICES}/*.sh ${SYSTEM_SERVICES_SCRIPTS}/* ${ENTRYPOINT_CHECKS}/* /app /opt /opt/venv && \
+    for dir in ${READ_WRITE_FOLDERS}; do \
+        install -d -o ${NETALERTX_USER} -g ${NETALERTX_GROUP} -m 700 "$dir"; \
+    done && \
+    apk del apk-tools && \
+    rm -Rf /var /etc/sudoers.d/* /etc/shadow /etc/gshadow /etc/sudoers \
+    /lib/apk /lib/firmware /lib/modules-load.d /lib/sysctl.d /mnt /home/ /root \
+    /srv /media && \
+    sed -i "/^\(${READ_ONLY_USER}\|${NETALERTX_USER}\):/!d" /etc/passwd && \
+    sed -i "/^\(${READ_ONLY_GROUP}\|${NETALERTX_GROUP}\):/!d" /etc/group && \
+    echo -ne '#!/bin/sh\n"$@"\n' > /usr/bin/sudo && chmod +x /usr/bin/sudo
+
+USER netalertx
+
+HEALTHCHECK --interval=30s --timeout=10s --start-period=60s --retries=3 \
+    CMD /services/healthcheck.sh
 
-ENTRYPOINT ["/init"]

Dockerfile.debian

@@ -1,16 +1,119 @@
+# Warning - use of this unhardened image is not recommended for production use.
+# This image is provided for backward compatibility, development and testing purposes only.
+# For production use, please use the hardened image built with Alpine. This image attempts to
+# treat a container as an operating system, which is an anti-pattern and a common source of
+# security issues.
+#
+# The default Dockerfile/docker-compose image contains the following security improvements 
+# over the Debian image:
+# - read-only filesystem
+# - no sudo access
+# - least possible permissions on all files and folders
+# - Root user has all permissions revoked and is unused
+# - Secure umask applied so files are owner-only by default
+# - non-privileged user runs the application
+# - no shell access for non-privileged users
+# - no unnecessary packages or services
+# - reduced capabilities
+# - tmpfs for writable folders
+# - healthcheck
+# - no package managers
+# - no compilers or build tools
+# - no systemd, uses lightweight init system
+# - no persistent storage except for config and db volumes
+# - minimal image size due to segmented build stages
+# - minimal base image (Alpine Linux)
+# - minimal python environment (venv, no pip)
+# - minimal stripped web server
+# - minimal stripped php environment 
+# - minimal services (nginx, php-fpm, crond, no unnecessary services or service managers)
+# - minimal users and groups (netalertx and readonly only, no others)
+# - minimal permissions (read-only for most files and folders, write-only for necessary folders)
+# - minimal capabilities (NET_ADMIN and NET_RAW only, no others)
+# - minimal environment variables (only necessary ones, no others)
+# - minimal entrypoint (only necessary commands, no others)
+# - Uses the same base image as the development environmnment (Alpine Linux)
+# - Uses the same services as the development environment (nginx, php-fpm, crond)
+# - Uses the same environment variables as the development environment (only necessary ones, no others)
+# - Uses the same file and folder structure as the development environment (only necessary ones, no others)
+# NetAlertX is designed to be run as an unattended network security monitoring appliance, which means it 
+# should be able to operate without human intervention. Overall, the hardened image is designed to be as 
+# secure as possible while still being functional and is recommended because you cannot attack a surface
+# that isn't there.
+
+
 FROM debian:bookworm-slim
 
-# default UID and GID
-ENV USER=pi USER_ID=1000 USER_GID=1000 PORT=20211 
 #TZ=Europe/London
 
+# NetAlertX app directories
+ENV INSTALL_DIR=/app
+ENV NETALERTX_APP=${INSTALL_DIR}
+ENV NETALERTX_DATA=/data
+ENV NETALERTX_CONFIG=${NETALERTX_DATA}/config
+ENV NETALERTX_FRONT=${NETALERTX_APP}/front
+ENV NETALERTX_SERVER=${NETALERTX_APP}/server
+ENV NETALERTX_API=/tmp/api
+ENV NETALERTX_DB=${NETALERTX_DATA}/db
+ENV NETALERTX_DB_FILE=${NETALERTX_DB}/app.db
+ENV NETALERTX_BACK=${NETALERTX_APP}/back
+ENV NETALERTX_LOG=/tmp/log
+ENV NETALERTX_PLUGINS_LOG=${NETALERTX_LOG}/plugins
+
+# NetAlertX log files
+ENV LOG_IP_CHANGES=${NETALERTX_LOG}/IP_changes.log
+ENV LOG_APP=${NETALERTX_LOG}/app.log
+ENV LOG_APP_FRONT=${NETALERTX_LOG}/app_front.log
+ENV LOG_REPORT_OUTPUT_TXT=${NETALERTX_LOG}/report_output.txt
+ENV LOG_DB_IS_LOCKED=${NETALERTX_LOG}/db_is_locked.log
+ENV LOG_REPORT_OUTPUT_HTML=${NETALERTX_LOG}/report_output.html
+ENV LOG_STDERR=${NETALERTX_LOG}/stderr.log
+ENV LOG_APP_PHP_ERRORS=${NETALERTX_LOG}/app.php_errors.log
+ENV LOG_EXECUTION_QUEUE=${NETALERTX_LOG}/execution_queue.log
+ENV LOG_REPORT_OUTPUT_JSON=${NETALERTX_LOG}/report_output.json
+ENV LOG_STDOUT=${NETALERTX_LOG}/stdout.log
+ENV LOG_CROND=${NETALERTX_LOG}/crond.log
+ENV LOG_NGINX_ERROR=${NETALERTX_LOG}/nginx-error.log
+
+# System Services configuration files
+ENV SYSTEM_SERVICES=/services
+ENV SYSTEM_SERVICES_CONFIG=${SYSTEM_SERVICES}/config
+ENV SYSTEM_NGINIX_CONFIG=${SYSTEM_SERVICES_CONFIG}/nginx
+ENV SYSTEM_NGINX_CONFIG_FILE=${SYSTEM_NGINIX_CONFIG}/nginx.conf
+ENV SYSTEM_SERVICES_ACTIVE_CONFIG=/tmp/nginx/active-config
+ENV NETALERTX_CONFIG_FILE=${NETALERTX_CONFIG}/app.conf
+ENV SYSTEM_SERVICES_PHP_FOLDER=${SYSTEM_SERVICES_CONFIG}/php
+ENV SYSTEM_SERVICES_PHP_FPM_D=${SYSTEM_SERVICES_PHP_FOLDER}/php-fpm.d
+ENV SYSTEM_SERVICES_CROND=${SYSTEM_SERVICES_CONFIG}/crond
+ENV SYSTEM_SERVICES_RUN=/tmp/run
+ENV SYSTEM_SERVICES_RUN_TMP=${SYSTEM_SERVICES_RUN}/tmp
+ENV SYSTEM_SERVICES_RUN_LOG=${SYSTEM_SERVICES_RUN}/logs
+ENV PHP_FPM_CONFIG_FILE=${SYSTEM_SERVICES_PHP_FOLDER}/php-fpm.conf
+
+#Python environment
+ENV PYTHONPATH=${NETALERTX_SERVER}
+ENV PYTHONUNBUFFERED=1 
+ENV VIRTUAL_ENV=/opt/venv
+ENV VIRTUAL_ENV_BIN=/opt/venv/bin
+ENV PATH="${VIRTUAL_ENV}/bin:${PATH}:/services"
+ENV VENDORSPATH=/app/back/ieee-oui.txt
+ENV VENDORSPATH_NEWEST=${SYSTEM_SERVICES_RUN_TMP}/ieee-oui.txt
+
+
+# App Environment
+ENV LISTEN_ADDR=0.0.0.0
+ENV PORT=20211
+ENV NETALERTX_DEBUG=0
+
+#Container environment
+ENV ENVIRONMENT=debian
+ENV USER=netalertx 
+ENV USER_ID=1000
+ENV USER_GID=1000 
+
 # Todo, figure out why using a workdir instead of full paths don't work
 # Todo, do we still need all these packages? I can already see sudo which isn't needed
 
-RUN apt-get update 
-RUN apt-get install sudo -y 
-
-ARG INSTALL_DIR=/app
 
 # create pi user and group
 # add root and www-data to pi group so they can r/w files and db
@@ -24,30 +127,46 @@ RUN groupadd --gid "${USER_GID}" "${USER}" && \
     usermod -a -G ${USER_GID} root && \
     usermod -a -G ${USER_GID} www-data
 
+COPY --chmod=775 --chown=${USER_ID}:${USER_GID} install/production-filesystem/ /    
 COPY --chmod=775 --chown=${USER_ID}:${USER_GID} . ${INSTALL_DIR}/
 
 
 # ❗ IMPORTANT - if you modify this file modify the /install/install_dependecies.debian.sh file as well ❗ 
+RUN apt update && apt-get install -y \
+    tini snmp ca-certificates curl libwww-perl arp-scan sudo gettext-base \
+    nginx-light php php-cgi php-fpm php-sqlite3 php-curl sqlite3 dnsutils net-tools  \
+    python3 python3-dev iproute2 nmap python3-pip zip git systemctl usbutils traceroute nbtscan openrc \
+    busybox nginx nginx-core mtr python3-venv
 
-
-RUN apt-get install -y \
-    tini snmp ca-certificates curl libwww-perl arp-scan perl apt-utils cron sudo \
-    nginx-light php php-cgi php-fpm php-sqlite3 php-curl sqlite3 dnsutils net-tools php-openssl \
-    python3 python3-dev iproute2 nmap python3-pip zip systemctl usbutils traceroute nbtscan avahi avahi-tools openrc dbus
-
-# Alternate dependencies
-RUN apt-get install nginx nginx-core mtr php-fpm php8.2-fpm php-cli php8.2 php8.2-sqlite3 -y
-RUN phpenmod -v 8.2 sqlite3 
+# While php8.3 is in debian bookworm repos, php-fpm is not included so we need to add sury.org repo
+# (Ondřej Surý maintains php packages for debian. This is temp until debian includes php-fpm in their
+# repos. Likely it will be in Debian Trixie.).  This keeps the image up-to-date with the alpine version.
+RUN apt-get install -y --no-install-recommends \
+    apt-transport-https \
+    ca-certificates \
+    lsb-release \
+    wget && \
+    wget -O /etc/apt/trusted.gpg.d/php.gpg https://packages.sury.org/php/apt.gpg && \
+    echo "deb https://packages.sury.org/php/ $(lsb_release -sc) main" > /etc/apt/sources.list.d/php.list && \
+    apt-get update && \
+    apt-get install -y php8.3-fpm php8.3-cli php8.3-sqlite3 php8.3-common php8.3-curl php8.3-cgi && \
+    ln -s /usr/sbin/php-fpm8.3 /usr/sbin/php-fpm83 # make it compatible with alpine version
 
 # Setup virtual python environment and use pip3 to install packages
-RUN apt-get install -y python3-venv
-RUN python3 -m venv myenv
+RUN python3 -m venv ${VIRTUAL_ENV} && \
+    /bin/bash -c "source ${VIRTUAL_ENV_BIN}/activate && update-alternatives --install /usr/bin/python python /usr/bin/python3 10 && pip3 install -r ${INSTALL_DIR}/requirements.txt"
+
+# Configure php-fpm
+RUN chmod -R 755 /services && \
+    chown -R ${USER}:${USER_GID} /services  && \
+    sed -i 's/^;listen.mode = .*/listen.mode = 0666/' ${SYSTEM_SERVICES_PHP_FPM_D}/www.conf && \
+    printf "user = %s\ngroup = %s\n" "${USER}" "${USER_GID}" >> /services/config/php/php-fpm.d/www.conf
+
 
-RUN /bin/bash -c "source myenv/bin/activate && update-alternatives --install /usr/bin/python python /usr/bin/python3 10 && pip3 install openwrt-luci-rpc asusrouter asyncio aiohttp graphene flask tplink-omada-client wakeonlan pycryptodome requests paho-mqtt scapy cron-converter pytz json2table dhcp-leases pyunifi speedtest-cli chardet python-nmap dnspython librouteros "
 
 # Create a buildtimestamp.txt to later check if a new version was released
 RUN date +%s > ${INSTALL_DIR}/front/buildtimestamp.txt
-
-CMD ["${INSTALL_DIR}/install/start.debian.sh"]
+USER netalertx:netalertx
+ENTRYPOINT ["/bin/bash","/entrypoint.sh"]
 
 

FUNDING.yml

@@ -1,2 +0,0 @@
-github: jokob-sk
-patreon: 84385063

README.md

@@ -6,10 +6,62 @@
 
 # NetAlertX - Network, presence scanner and alert framework
 
-Get visibility of what's going on on your WIFI/LAN network and enable presence detection of important devices. Schedule scans for devices, port changes and get alerts if unknown devices or changes are found. Write your own [Plugin](https://github.com/jokob-sk/NetAlertX/tree/main/docs/PLUGINS.md#readme) with auto-generated UI and in-build notification system. Build out and easily maintain your network source of truth (NSoT).
+Get visibility of what's going on on your WIFI/LAN network and enable presence detection of important devices. Schedule scans for devices, port changes and get alerts if unknown devices or changes are found. Write your own [Plugin](https://github.com/jokob-sk/NetAlertX/tree/main/docs/PLUGINS.md#readme) with auto-generated UI and in-build notification system. Build out and easily maintain your network source of truth (NSoT) and device inventory.
+
+## 📋 Table of Contents
+
+- [NetAlertX - Network, presence scanner and alert framework](#netalertx---network-presence-scanner-and-alert-framework)
+  - [📋 Table of Contents](#-table-of-contents)
+  - [🚀 Quick Start](#-quick-start)
+  - [📦 Features](#-features)
+    - [Scanners](#scanners)
+    - [Notification gateways](#notification-gateways)
+    - [Integrations and Plugins](#integrations-and-plugins)
+    - [Workflows](#workflows)
+  - [📚 Documentation](#-documentation)
+  - [🔐 Security \& Privacy](#-security--privacy)
+  - [❓ FAQ](#-faq)
+  - [🐞 Known Issues](#-known-issues)
+  - [📃 Everything else](#-everything-else)
+    - [📧 Get notified what's new](#-get-notified-whats-new)
+    - [🔀 Other Alternative Apps](#-other-alternative-apps)
+    - [💙 Donations](#-donations)
+    - [🏗 Contributors](#-contributors)
+    - [🌍 Translations](#-translations)
+    - [License](#license)
 
 
-| [📑 Docker guide](https://github.com/jokob-sk/NetAlertX/blob/main/dockerfiles/README.md) | [🚀 Releases](https://github.com/jokob-sk/NetAlertX/releases) | [📚 Docs](https://jokob-sk.github.io/NetAlertX/) | [🔌 Plugins](https://github.com/jokob-sk/NetAlertX/blob/main/docs/PLUGINS.md) | [🤖 Ask AI](https://gurubase.io/g/netalertx)
+## 🚀 Quick Start
+
+Start NetAlertX in seconds with Docker:
+
+```bash
+docker run -d --rm --network=host \
+  -v local_path/config:/data/config \
+  -v local_path/db:/data/db \
+  --mount type=tmpfs,target=/tmp/api \
+  -e PUID=200 -e PGID=300 \
+  -e TZ=Europe/Berlin \
+  -e PORT=20211 \
+  ghcr.io/jokob-sk/netalertx:latest
+```
+
+To deploy a containerized instance directly from the source repository, execute the following BASH sequence:
+```bash
+git clone https://github.com/jokob-sk/NetAlertX.git
+cd NetAlertX
+docker compose up --force-recreate --build
+# To customize: edit docker-compose.yaml and run that last command again
+```
+
+Need help configuring it? Check the [usage guide](https://github.com/jokob-sk/NetAlertX/blob/main/docs/README.md) or [full documentation](https://jokob-sk.github.io/NetAlertX/).
+
+For Home Assistant users: [Click here to add NetAlertX](https://my.home-assistant.io/redirect/supervisor_add_addon_repository/?repository_url=https%3A%2F%2Fgithub.com%2Falexbelgium%2Fhassio-addons)
+
+For other install methods, check the [installation docs](#-documentation)
+
+
+| [📑 Docker guide](https://github.com/jokob-sk/NetAlertX/blob/main/docs/DOCKER_INSTALLATION.md) | [🚀 Releases](https://github.com/jokob-sk/NetAlertX/releases) | [📚 Docs](https://jokob-sk.github.io/NetAlertX/) | [🔌 Plugins](https://github.com/jokob-sk/NetAlertX/blob/main/docs/PLUGINS.md) | [🤖 Ask AI](https://gurubase.io/g/netalertx)
 |----------------------| ----------------------|  ----------------------| ----------------------| ----------------------| 
 
 ![showcase][showcase] 
@@ -30,7 +82,7 @@ Get visibility of what's going on on your WIFI/LAN network and enable presence d
 
 ### Scanners
 
-The app scans your network for **New devices**, **New connections** (re-connections), **Disconnections**, **"Always Connected" devices down**, Devices **IP changes** and **Internet IP address changes**. Discovery & scan methods include: **arp-scan**,  **Pi-hole - DB import**,  **Pi-hole - DHCP leases import**, **Generic DHCP leases import**, **UNIFI controller import**, **SNMP-enabled router import**. Check the [Plugins](https://github.com/jokob-sk/NetAlertX/tree/main/docs/PLUGINS.md#readme) docs for a full lits of avaliable plugins. 
+The app scans your network for **New devices**, **New connections** (re-connections), **Disconnections**, **"Always Connected" devices down**, Devices **IP changes** and **Internet IP address changes**. Discovery & scan methods include: **arp-scan**,  **Pi-hole - DB import**,  **Pi-hole - DHCP leases import**, **Generic DHCP leases import**, **UNIFI controller import**, **SNMP-enabled router import**. Check the [Plugins](https://github.com/jokob-sk/NetAlertX/tree/main/docs/PLUGINS.md#readme) docs for a full list of avaliable plugins. 
 
 ### Notification gateways
 
@@ -41,13 +93,17 @@ Send notifications to more than 80+ services, including Telegram via [Apprise](h
 Feed your data and device changes into [Home Assistant](https://github.com/jokob-sk/NetAlertX/blob/main/docs/HOME_ASSISTANT.md), read [API endpoints](https://github.com/jokob-sk/NetAlertX/blob/main/docs/API.md), or use [Webhooks](https://github.com/jokob-sk/NetAlertX/blob/main/docs/WEBHOOK_N8N.md) to setup custom automation flows. You can also 
 build your own scanners with the [Plugin system](https://github.com/jokob-sk/NetAlertX/tree/main/docs/PLUGINS.md#readme) in as little as [15 minutes](https://www.youtube.com/watch?v=cdbxlwiWhv8).
 
+### Workflows
+
+The [workflows module](https://github.com/jokob-sk/NetAlertX/blob/main/docs/WORKFLOWS.md) allows to automate repetitive tasks, making network management more efficient. Whether you need to assign newly discovered devices to a specific Network Node, auto-group devices from a given vendor, unarchive a device if detected online, or automatically delete devices, this module provides the flexibility to tailor the automations to your needs.
+
 
 ## 📚 Documentation
 <!--- --------------------------------------------------------------------- --->
 
 Supported browsers: Chrome, Firefox
 
-- [[Installation] Docker](https://github.com/jokob-sk/NetAlertX/blob/main/dockerfiles/README.md) 
+- [[Installation] Docker](https://github.com/jokob-sk/NetAlertX/blob/main/docs/DOCKER_INSTALLATION.md) 
 - [[Installation] Home Assistant](https://github.com/alexbelgium/hassio-addons/tree/master/netalertx) 
 - [[Installation] Bare metal](https://github.com/jokob-sk/NetAlertX/blob/main/docs/HW_INSTALL.md) 
 - [[Installation] Unraid App](https://unraid.net/community/apps) 
@@ -55,6 +111,46 @@ Supported browsers: Chrome, Firefox
 - [[Development] API docs](https://github.com/jokob-sk/NetAlertX/blob/main/docs/API.md)
 - [[Development] Custom Plugins](https://github.com/jokob-sk/NetAlertX/blob/main/docs/PLUGINS_DEV.md)
 
+...or explore all the [documentation here](https://jokob-sk.github.io/NetAlertX/).
+
+## 🔐 Security & Privacy
+
+NetAlertX scans your local network and can store metadata about connected devices. By default, all data is stored **locally**. No information is sent to external services unless you explicitly configure notifications or integrations.
+
+To further secure your installation:
+- Run it behind a reverse proxy with authentication
+- Use firewalls to restrict access to the web UI
+- Regularly update to the latest version for security patches
+
+See [Security Best Practices](https://github.com/jokob-sk/NetAlertX/security) for more details.
+
+
+## ❓ FAQ
+
+**Q: Why don’t I see any devices?**  
+A: Ensure the container has proper network access (e.g., use `--network host` on Linux). Also check that your scan method is properly configured in the UI.
+
+**Q: Does this work on Wi-Fi-only devices like Raspberry Pi?**  
+A: Yes, but some scanners (e.g. ARP) work best on Ethernet. For Wi-Fi, try SNMP, DHCP, or Pi-hole import.
+
+**Q: Will this send any data to the internet?**  
+A: No. All scans and data remain local, unless you set up cloud-based notifications.
+
+**Q: Can I use this without Docker?**  
+A: Yes! You can install it bare-metal. See the [bare metal installation guide](https://github.com/jokob-sk/NetAlertX/blob/main/docs/HW_INSTALL.md).
+
+**Q: Where is the data stored?**  
+A: In the `/data/config` and `/data/db` folders. Back up these folders regularly.
+
+
+## 🐞 Known Issues
+
+- Some scanners (e.g. ARP) may not detect devices on different subnets. See the [Remote networks guide](https://github.com/jokob-sk/NetAlertX/blob/main/docs/REMOTE_NETWORKS.md) for workarounds.
+- Wi-Fi-only networks may require alternate scanners for accurate detection.
+- Notification throttling may be needed for large networks to prevent spam.
+- On some systems, elevated permissions (like `CAP_NET_RAW`) may be needed for low-level scanning.
+
+Check the [GitHub Issues](https://github.com/jokob-sk/NetAlertX/issues) for the latest bug reports and solutions and consult [the official documentation](https://jokob-sk.github.io/NetAlertX/).
 
 ## 📃 Everything else
 <!--- --------------------------------------------------------------------- --->
@@ -109,7 +205,6 @@ Proudly using [Weblate](https://hosted.weblate.org/projects/pialert/). Help out
 >  GPL 3.0 | [Read more here](LICENSE.txt) | Source of the [animated GIF (Loading Animation)](https://commons.wikimedia.org/wiki/File:Loading_Animation.gif) | Source of the [selfhosted Fonts](https://github.com/adobe-fonts/source-sans)
 
 
-
 <!--- --------------------------------------------------------------------- --->
 [main]:                     ./docs/img/devices_split.png                  "Main screen"
 [device_details]:           ./docs/img/device_details.png                 "Screen 1"
@@ -119,7 +214,6 @@ Proudly using [Weblate](https://hosted.weblate.org/projects/pialert/). Help out
 [network]:                  ./docs/img/network.png                        "Screen 5"
 [settings]:                 ./docs/img/settings.png                       "Screen 6"
 [showcase]:                 ./docs/img/showcase.gif                       "Screen 6"
-[help_faq]:                 ./docs/img/help_faq.png                       "Screen 7"
 [sync_hub]:                 ./docs/img/sync_hub.png                       "Screen 8"
 [notification_center]:      ./docs/img/notification_center.png            "Screen 8"
 [sent_reports_text]:        ./docs/img/sent_reports_text.png              "Screen 8"
@@ -128,4 +222,3 @@ Proudly using [Weblate](https://hosted.weblate.org/projects/pialert/). Help out
 [main_dark]:                /docs/img/1_devices_dark.jpg                  "Main screen dark"
 [maintain_dark]:            /docs/img/5_maintain.jpg                      "Maintain screen dark"
 [follow_star]:              /docs/img/Follow_Releases_and_Star.gif        "Follow and Star"
-

api

@@ -0,0 +1 @@
+/tmp/api

api/.gitignore

@@ -1,2 +0,0 @@
-*
-!.gitignore

back/app.conf

@@ -18,18 +18,20 @@
 # SCAN_SUBNETS    = [ '192.168.1.0/24 --interface=eth1', '192.168.1.0/24 --interface=eth0' ]
 
 DISCOVER_PLUGINS=True
-SCAN_SUBNETS=['192.168.1.0/24 --interface=eth0']
+SCAN_SUBNETS=['--localnet']
 TIMEZONE='Europe/Berlin'
-LOADED_PLUGINS = ['ARPSCAN','CSVBCKP','DBCLNP', 'INTRNT','MAINT','NEWDEV','NSLOOKUP','NTFPRCS', 'AVAHISCAN', 'SETPWD','SMTP', 'SYNC', 'VNDRPDT', 'WORKFLOWS', 'UI']
+LOADED_PLUGINS=['ARPSCAN', 'AVAHISCAN', 'CSVBCKP','DBCLNP', 'DIGSCAN', 'INTRNT', 'MAINT', 'NEWDEV', 'NBTSCAN', 'NSLOOKUP','NTFPRCS', 'SETPWD', 'SMTP', 'SYNC', 'VNDRPDT', 'WORKFLOWS', 'UI']
 
 DAYS_TO_KEEP_EVENTS=90
 # Used for generating links in emails. Make sure not to add a trailing slash!
-REPORT_DASHBOARD_URL='http://netalertx'
+REPORT_DASHBOARD_URL='update_REPORT_DASHBOARD_URL_setting'
 
 # Make sure at least these scanners are enabled for new installs, other defaults are taken from the config.json
 INTRNT_RUN='schedule'
 ARPSCAN_RUN='schedule'
 NSLOOKUP_RUN='before_name_updates'
+AVAHISCAN_RUN='before_name_updates'
+NBTSCAN_RUN='before_name_updates'
 
 # Email 
 #-------------------------------------

back/app.sql

@@ -0,0 +1,411 @@
+CREATE TABLE sqlite_stat1(tbl,idx,stat);
+CREATE TABLE Events (eve_MAC STRING (50) NOT NULL COLLATE NOCASE, eve_IP STRING (50) NOT NULL COLLATE NOCASE, eve_DateTime DATETIME NOT NULL, eve_EventType STRING (30) NOT NULL COLLATE NOCASE, eve_AdditionalInfo STRING (250) DEFAULT (''), eve_PendingAlertEmail BOOLEAN NOT NULL CHECK (eve_PendingAlertEmail IN (0, 1)) DEFAULT (1), eve_PairEventRowid INTEGER);
+CREATE TABLE Sessions (ses_MAC STRING (50) COLLATE NOCASE, ses_IP STRING (50) COLLATE NOCASE, ses_EventTypeConnection STRING (30) COLLATE NOCASE, ses_DateTimeConnection DATETIME, ses_EventTypeDisconnection STRING (30) COLLATE NOCASE, ses_DateTimeDisconnection DATETIME, ses_StillConnected BOOLEAN, ses_AdditionalInfo STRING (250));
+CREATE TABLE IF NOT EXISTS "Online_History" (
+            "Index"	INTEGER,
+            "Scan_Date"	TEXT,
+            "Online_Devices"	INTEGER,
+            "Down_Devices"	INTEGER,
+            "All_Devices"	INTEGER,
+            "Archived_Devices" INTEGER,
+            "Offline_Devices" INTEGER,
+            PRIMARY KEY("Index" AUTOINCREMENT)
+          );
+CREATE TABLE sqlite_sequence(name,seq);
+CREATE TABLE Devices (
+              devMac STRING (50) PRIMARY KEY NOT NULL COLLATE NOCASE,
+              devName STRING (50) NOT NULL DEFAULT "(unknown)",
+              devOwner STRING (30) DEFAULT "(unknown)" NOT NULL,
+              devType STRING (30),
+              devVendor STRING (250),
+              devFavorite BOOLEAN CHECK (devFavorite IN (0, 1)) DEFAULT (0) NOT NULL,
+              devGroup STRING (10),
+              devComments TEXT,
+              devFirstConnection DATETIME NOT NULL,
+              devLastConnection DATETIME NOT NULL,
+              devLastIP STRING (50) NOT NULL COLLATE NOCASE,
+              devStaticIP BOOLEAN DEFAULT (0) NOT NULL CHECK (devStaticIP IN (0, 1)),
+              devScan INTEGER DEFAULT (1) NOT NULL,
+              devLogEvents BOOLEAN NOT NULL DEFAULT (1) CHECK (devLogEvents IN (0, 1)),
+              devAlertEvents BOOLEAN NOT NULL DEFAULT (1) CHECK (devAlertEvents IN (0, 1)),
+              devAlertDown BOOLEAN NOT NULL DEFAULT (0) CHECK (devAlertDown IN (0, 1)),
+              devSkipRepeated INTEGER DEFAULT 0 NOT NULL,
+              devLastNotification DATETIME,
+              devPresentLastScan BOOLEAN NOT NULL DEFAULT (0) CHECK (devPresentLastScan IN (0, 1)),
+              devIsNew BOOLEAN NOT NULL DEFAULT (1) CHECK (devIsNew IN (0, 1)),
+              devLocation STRING (250) COLLATE NOCASE,
+              devIsArchived BOOLEAN NOT NULL DEFAULT (0) CHECK (devIsArchived IN (0, 1)),
+              devParentMAC TEXT,
+              devParentPort INTEGER,
+              devIcon TEXT,
+              devGUID TEXT,
+              devSite TEXT,
+              devSSID TEXT,
+              devSyncHubNode TEXT,
+              devSourcePlugin TEXT
+          , "devCustomProps" TEXT);
+CREATE TABLE IF NOT EXISTS "Settings" (
+            "setKey"	        TEXT,
+            "setName"	        TEXT,
+            "setDescription"	TEXT,
+            "setType"         TEXT,
+            "setOptions"      TEXT,
+            "setGroup"	          TEXT,
+            "setValue"	      TEXT,
+            "setEvents"	        TEXT,
+            "setOverriddenByEnv" INTEGER
+            );
+CREATE TABLE IF NOT EXISTS "Parameters" (
+            "par_ID" TEXT PRIMARY KEY,
+            "par_Value"	TEXT
+          );
+CREATE TABLE Plugins_Objects(
+                                    "Index"	          INTEGER,
+                                    Plugin TEXT NOT NULL,                                    
+                                    Object_PrimaryID TEXT NOT NULL,
+                                    Object_SecondaryID TEXT NOT NULL,
+                                    DateTimeCreated TEXT NOT NULL,
+                                    DateTimeChanged TEXT NOT NULL,
+                                    Watched_Value1 TEXT NOT NULL,
+                                    Watched_Value2 TEXT NOT NULL,
+                                    Watched_Value3 TEXT NOT NULL,
+                                    Watched_Value4 TEXT NOT NULL,
+                                    Status TEXT NOT NULL,
+                                    Extra TEXT NOT NULL,
+                                    UserData TEXT NOT NULL,
+                                    ForeignKey TEXT NOT NULL,
+                                    SyncHubNodeName TEXT,
+                                    "HelpVal1" TEXT,
+                                    "HelpVal2" TEXT,
+                                    "HelpVal3" TEXT,
+                                    "HelpVal4" TEXT,
+                                    ObjectGUID TEXT,
+                                    PRIMARY KEY("Index" AUTOINCREMENT)
+                        );
+CREATE TABLE Plugins_Events(
+                                    "Index"	          INTEGER,
+                                    Plugin TEXT NOT NULL,
+                                    Object_PrimaryID TEXT NOT NULL,
+                                    Object_SecondaryID TEXT NOT NULL,
+                                    DateTimeCreated TEXT NOT NULL,
+                                    DateTimeChanged TEXT NOT NULL,
+                                    Watched_Value1 TEXT NOT NULL,
+                                    Watched_Value2 TEXT NOT NULL,
+                                    Watched_Value3 TEXT NOT NULL,
+                                    Watched_Value4 TEXT NOT NULL,
+                                    Status TEXT NOT NULL,
+                                    Extra TEXT NOT NULL,
+                                    UserData TEXT NOT NULL,
+                                    ForeignKey TEXT NOT NULL,
+                                    SyncHubNodeName TEXT,
+                                    "HelpVal1" TEXT,
+                                    "HelpVal2" TEXT,
+                                    "HelpVal3" TEXT,
+                                    "HelpVal4" TEXT, "ObjectGUID" TEXT,
+                                    PRIMARY KEY("Index" AUTOINCREMENT)
+                        );
+CREATE TABLE Plugins_History(
+                                    "Index"	          INTEGER,
+                                    Plugin TEXT NOT NULL,
+                                    Object_PrimaryID TEXT NOT NULL,
+                                    Object_SecondaryID TEXT NOT NULL,
+                                    DateTimeCreated TEXT NOT NULL,
+                                    DateTimeChanged TEXT NOT NULL,
+                                    Watched_Value1 TEXT NOT NULL,
+                                    Watched_Value2 TEXT NOT NULL,
+                                    Watched_Value3 TEXT NOT NULL,
+                                    Watched_Value4 TEXT NOT NULL,
+                                    Status TEXT NOT NULL,
+                                    Extra TEXT NOT NULL,
+                                    UserData TEXT NOT NULL,
+                                    ForeignKey TEXT NOT NULL,
+                                    SyncHubNodeName TEXT,
+                                    "HelpVal1" TEXT,
+                                    "HelpVal2" TEXT,
+                                    "HelpVal3" TEXT,
+                                    "HelpVal4" TEXT, "ObjectGUID" TEXT,
+                                    PRIMARY KEY("Index" AUTOINCREMENT)
+                        );
+CREATE TABLE Plugins_Language_Strings(
+                                "Index"	          INTEGER,
+                                Language_Code TEXT NOT NULL,
+                                String_Key TEXT NOT NULL,
+                                String_Value TEXT NOT NULL,
+                                Extra TEXT NOT NULL,
+                                PRIMARY KEY("Index" AUTOINCREMENT)
+                        );
+CREATE TABLE CurrentScan (                                
+                                cur_MAC STRING(50) NOT NULL COLLATE NOCASE,
+                                cur_IP STRING(50) NOT NULL COLLATE NOCASE,
+                                cur_Vendor STRING(250),
+                                cur_ScanMethod STRING(10),
+                                cur_Name STRING(250),
+                                cur_LastQuery STRING(250),
+                                cur_DateTime STRING(250),
+                                cur_SyncHubNodeName STRING(50),
+                                cur_NetworkSite STRING(250),
+                                cur_SSID STRING(250),
+                                cur_NetworkNodeMAC STRING(250),
+                                cur_PORT STRING(250),
+                                cur_Type STRING(250),
+                                UNIQUE(cur_MAC)
+                            );
+CREATE TABLE IF NOT EXISTS "AppEvents" (
+                "Index" INTEGER PRIMARY KEY AUTOINCREMENT,
+                "GUID" TEXT UNIQUE,
+                "AppEventProcessed" BOOLEAN,
+                "DateTimeCreated" TEXT,
+                "ObjectType" TEXT,
+                "ObjectGUID" TEXT,
+                "ObjectPlugin" TEXT,
+                "ObjectPrimaryID" TEXT,
+                "ObjectSecondaryID" TEXT,
+                "ObjectForeignKey" TEXT,
+                "ObjectIndex" TEXT,            
+                "ObjectIsNew" BOOLEAN, 
+                "ObjectIsArchived" BOOLEAN, 
+                "ObjectStatusColumn" TEXT,
+                "ObjectStatus" TEXT,            
+                "AppEventType" TEXT,
+                "Helper1" TEXT,
+                "Helper2" TEXT,
+                "Helper3" TEXT,
+                "Extra" TEXT
+            );
+CREATE TABLE IF NOT EXISTS "Notifications" (
+            "Index"           INTEGER,
+            "GUID"            TEXT UNIQUE,
+            "DateTimeCreated" TEXT,
+            "DateTimePushed"  TEXT,
+            "Status"          TEXT,
+            "JSON"            TEXT,
+            "Text"            TEXT,
+            "HTML"            TEXT,
+            "PublishedVia"    TEXT,
+            "Extra"           TEXT,
+            PRIMARY KEY("Index" AUTOINCREMENT)
+        );
+CREATE INDEX IDX_eve_DateTime ON Events (eve_DateTime);
+CREATE INDEX IDX_eve_EventType ON Events (eve_EventType COLLATE NOCASE);
+CREATE INDEX IDX_eve_MAC ON Events (eve_MAC COLLATE NOCASE);
+CREATE INDEX IDX_eve_PairEventRowid ON Events (eve_PairEventRowid);
+CREATE INDEX IDX_ses_EventTypeDisconnection ON Sessions (ses_EventTypeDisconnection COLLATE NOCASE);
+CREATE INDEX IDX_ses_EventTypeConnection ON Sessions (ses_EventTypeConnection COLLATE NOCASE);
+CREATE INDEX IDX_ses_DateTimeDisconnection ON Sessions (ses_DateTimeDisconnection);
+CREATE INDEX IDX_ses_MAC ON Sessions (ses_MAC COLLATE NOCASE);
+CREATE INDEX IDX_ses_DateTimeConnection ON Sessions (ses_DateTimeConnection);
+CREATE INDEX IDX_dev_PresentLastScan ON Devices (devPresentLastScan);
+CREATE INDEX IDX_dev_FirstConnection ON Devices (devFirstConnection);
+CREATE INDEX IDX_dev_AlertDeviceDown ON Devices (devAlertDown);
+CREATE INDEX IDX_dev_StaticIP ON Devices (devStaticIP);
+CREATE INDEX IDX_dev_ScanCycle ON Devices (devScan);
+CREATE INDEX IDX_dev_Favorite ON Devices (devFavorite);
+CREATE INDEX IDX_dev_LastIP ON Devices (devLastIP);
+CREATE INDEX IDX_dev_NewDevice ON Devices (devIsNew);
+CREATE INDEX IDX_dev_Archived ON Devices (devIsArchived);
+CREATE VIEW Events_Devices AS 
+                            SELECT * 
+                            FROM Events 
+                            LEFT JOIN Devices ON eve_MAC = devMac
+/* Events_Devices(eve_MAC,eve_IP,eve_DateTime,eve_EventType,eve_AdditionalInfo,eve_PendingAlertEmail,eve_PairEventRowid,devMac,devName,devOwner,devType,devVendor,devFavorite,devGroup,devComments,devFirstConnection,devLastConnection,devLastIP,devStaticIP,devScan,devLogEvents,devAlertEvents,devAlertDown,devSkipRepeated,devLastNotification,devPresentLastScan,devIsNew,devLocation,devIsArchived,devParentMAC,devParentPort,devIcon,devGUID,devSite,devSSID,devSyncHubNode,devSourcePlugin,devCustomProps) */;
+CREATE VIEW LatestEventsPerMAC AS
+                                WITH RankedEvents AS (
+                                    SELECT 
+                                        e.*,
+                                        ROW_NUMBER() OVER (PARTITION BY e.eve_MAC ORDER BY e.eve_DateTime DESC) AS row_num
+                                    FROM Events AS e
+                                )
+                                SELECT 
+                                    e.*, 
+                                    d.*, 
+                                    c.*
+                                FROM RankedEvents AS e
+                                LEFT JOIN Devices AS d ON e.eve_MAC = d.devMac
+                                INNER JOIN CurrentScan AS c ON e.eve_MAC = c.cur_MAC
+                                WHERE e.row_num = 1
+/* LatestEventsPerMAC(eve_MAC,eve_IP,eve_DateTime,eve_EventType,eve_AdditionalInfo,eve_PendingAlertEmail,eve_PairEventRowid,row_num,devMac,devName,devOwner,devType,devVendor,devFavorite,devGroup,devComments,devFirstConnection,devLastConnection,devLastIP,devStaticIP,devScan,devLogEvents,devAlertEvents,devAlertDown,devSkipRepeated,devLastNotification,devPresentLastScan,devIsNew,devLocation,devIsArchived,devParentMAC,devParentPort,devIcon,devGUID,devSite,devSSID,devSyncHubNode,devSourcePlugin,devCustomProps,cur_MAC,cur_IP,cur_Vendor,cur_ScanMethod,cur_Name,cur_LastQuery,cur_DateTime,cur_SyncHubNodeName,cur_NetworkSite,cur_SSID,cur_NetworkNodeMAC,cur_PORT,cur_Type) */;
+CREATE VIEW Sessions_Devices AS SELECT * FROM Sessions LEFT JOIN "Devices" ON ses_MAC = devMac
+/* Sessions_Devices(ses_MAC,ses_IP,ses_EventTypeConnection,ses_DateTimeConnection,ses_EventTypeDisconnection,ses_DateTimeDisconnection,ses_StillConnected,ses_AdditionalInfo,devMac,devName,devOwner,devType,devVendor,devFavorite,devGroup,devComments,devFirstConnection,devLastConnection,devLastIP,devStaticIP,devScan,devLogEvents,devAlertEvents,devAlertDown,devSkipRepeated,devLastNotification,devPresentLastScan,devIsNew,devLocation,devIsArchived,devParentMAC,devParentPort,devIcon,devGUID,devSite,devSSID,devSyncHubNode,devSourcePlugin,devCustomProps) */;
+CREATE VIEW Convert_Events_to_Sessions AS  SELECT EVE1.eve_MAC,
+                                      EVE1.eve_IP,
+                                      EVE1.eve_EventType AS eve_EventTypeConnection,
+                                      EVE1.eve_DateTime AS eve_DateTimeConnection,
+                                      CASE WHEN EVE2.eve_EventType IN ('Disconnected', 'Device Down') OR
+                                                EVE2.eve_EventType IS NULL THEN EVE2.eve_EventType ELSE '<missing event>' END AS eve_EventTypeDisconnection,
+                                      CASE WHEN EVE2.eve_EventType IN ('Disconnected', 'Device Down') THEN EVE2.eve_DateTime ELSE NULL END AS eve_DateTimeDisconnection,
+                                      CASE WHEN EVE2.eve_EventType IS NULL THEN 1 ELSE 0 END AS eve_StillConnected,
+                                      EVE1.eve_AdditionalInfo
+                                  FROM Events AS EVE1
+                                      LEFT JOIN
+                                      Events AS EVE2 ON EVE1.eve_PairEventRowID = EVE2.RowID
+                                WHERE EVE1.eve_EventType IN ('New Device', 'Connected','Down Reconnected')
+                            UNION
+                                SELECT eve_MAC,
+                                      eve_IP,
+                                      '<missing event>' AS eve_EventTypeConnection,
+                                      NULL AS eve_DateTimeConnection,
+                                      eve_EventType AS eve_EventTypeDisconnection,
+                                      eve_DateTime AS eve_DateTimeDisconnection,
+                                      0 AS eve_StillConnected,
+                                      eve_AdditionalInfo
+                                  FROM Events AS EVE1
+                                WHERE (eve_EventType = 'Device Down' OR
+                                        eve_EventType = 'Disconnected') AND
+                                      EVE1.eve_PairEventRowID IS NULL
+/* Convert_Events_to_Sessions(eve_MAC,eve_IP,eve_EventTypeConnection,eve_DateTimeConnection,eve_EventTypeDisconnection,eve_DateTimeDisconnection,eve_StillConnected,eve_AdditionalInfo) */;
+CREATE TRIGGER "trg_insert_devices"
+            AFTER INSERT ON "Devices"
+            WHEN NOT EXISTS (
+                SELECT 1 FROM AppEvents 
+                WHERE AppEventProcessed = 0 
+                AND ObjectType = 'Devices'
+                AND ObjectGUID = NEW.devGUID
+                AND ObjectStatus = CASE WHEN NEW.devPresentLastScan = 1 THEN 'online' ELSE 'offline' END 
+                AND AppEventType = 'insert'
+            )
+            BEGIN
+                INSERT INTO "AppEvents" (
+                    "GUID",
+                    "DateTimeCreated",
+                    "AppEventProcessed",
+                    "ObjectType",
+                    "ObjectGUID",
+                    "ObjectPrimaryID",
+                    "ObjectSecondaryID",
+                    "ObjectStatus",
+                    "ObjectStatusColumn",
+                    "ObjectIsNew",
+                    "ObjectIsArchived",
+                    "ObjectForeignKey",
+                    "ObjectPlugin",
+                    "AppEventType"
+                )
+                VALUES (
+                    
+                lower(
+                    hex(randomblob(4)) || '-' || hex(randomblob(2)) || '-' || '4' || 
+                    substr(hex( randomblob(2)), 2) || '-' || 
+                    substr('AB89', 1 + (abs(random()) % 4) , 1)  ||
+                    substr(hex(randomblob(2)), 2) || '-' || 
+                    hex(randomblob(6))
+                )
+            , 
+                    DATETIME('now'), 
+                    FALSE, 
+                    'Devices', 
+                    NEW.devGUID,  -- ObjectGUID
+                    NEW.devMac,  -- ObjectPrimaryID
+                    NEW.devLastIP,  -- ObjectSecondaryID
+                    CASE WHEN NEW.devPresentLastScan = 1 THEN 'online' ELSE 'offline' END,  -- ObjectStatus
+                    'devPresentLastScan',  -- ObjectStatusColumn
+                    NEW.devIsNew,  -- ObjectIsNew
+                    NEW.devIsArchived,  -- ObjectIsArchived
+                    NEW.devGUID,  -- ObjectForeignKey
+                    'DEVICES',  -- ObjectForeignKey
+                    'insert'
+                );
+            END;
+CREATE TRIGGER "trg_update_devices"
+            AFTER UPDATE ON "Devices"
+            WHEN NOT EXISTS (
+                SELECT 1 FROM AppEvents 
+                WHERE AppEventProcessed = 0 
+                AND ObjectType = 'Devices'
+                AND ObjectGUID = NEW.devGUID
+                AND ObjectStatus = CASE WHEN NEW.devPresentLastScan = 1 THEN 'online' ELSE 'offline' END 
+                AND AppEventType = 'update'
+            )
+            BEGIN
+                INSERT INTO "AppEvents" (
+                    "GUID",
+                    "DateTimeCreated",
+                    "AppEventProcessed",
+                    "ObjectType",
+                    "ObjectGUID",
+                    "ObjectPrimaryID",
+                    "ObjectSecondaryID",
+                    "ObjectStatus",
+                    "ObjectStatusColumn",
+                    "ObjectIsNew",
+                    "ObjectIsArchived",
+                    "ObjectForeignKey",
+                    "ObjectPlugin",
+                    "AppEventType"
+                )
+                VALUES (
+                    
+                lower(
+                    hex(randomblob(4)) || '-' || hex(randomblob(2)) || '-' || '4' || 
+                    substr(hex( randomblob(2)), 2) || '-' || 
+                    substr('AB89', 1 + (abs(random()) % 4) , 1)  ||
+                    substr(hex(randomblob(2)), 2) || '-' || 
+                    hex(randomblob(6))
+                )
+            , 
+                    DATETIME('now'), 
+                    FALSE, 
+                    'Devices', 
+                    NEW.devGUID,  -- ObjectGUID
+                    NEW.devMac,  -- ObjectPrimaryID
+                    NEW.devLastIP,  -- ObjectSecondaryID
+                    CASE WHEN NEW.devPresentLastScan = 1 THEN 'online' ELSE 'offline' END,  -- ObjectStatus
+                    'devPresentLastScan',  -- ObjectStatusColumn
+                    NEW.devIsNew,  -- ObjectIsNew
+                    NEW.devIsArchived,  -- ObjectIsArchived
+                    NEW.devGUID,  -- ObjectForeignKey
+                    'DEVICES',  -- ObjectForeignKey
+                    'update'
+                );
+            END;
+CREATE TRIGGER "trg_delete_devices"
+            AFTER DELETE ON "Devices"
+            WHEN NOT EXISTS (
+                SELECT 1 FROM AppEvents 
+                WHERE AppEventProcessed = 0 
+                AND ObjectType = 'Devices'
+                AND ObjectGUID = OLD.devGUID
+                AND ObjectStatus = CASE WHEN OLD.devPresentLastScan = 1 THEN 'online' ELSE 'offline' END 
+                AND AppEventType = 'delete'
+            )
+            BEGIN
+                INSERT INTO "AppEvents" (
+                    "GUID",
+                    "DateTimeCreated",
+                    "AppEventProcessed",
+                    "ObjectType",
+                    "ObjectGUID",
+                    "ObjectPrimaryID",
+                    "ObjectSecondaryID",
+                    "ObjectStatus",
+                    "ObjectStatusColumn",
+                    "ObjectIsNew",
+                    "ObjectIsArchived",
+                    "ObjectForeignKey",
+                    "ObjectPlugin",
+                    "AppEventType"
+                )
+                VALUES (
+                    
+                lower(
+                    hex(randomblob(4)) || '-' || hex(randomblob(2)) || '-' || '4' || 
+                    substr(hex( randomblob(2)), 2) || '-' || 
+                    substr('AB89', 1 + (abs(random()) % 4) , 1)  ||
+                    substr(hex(randomblob(2)), 2) || '-' || 
+                    hex(randomblob(6))
+                )
+            , 
+                    DATETIME('now'), 
+                    FALSE, 
+                    'Devices', 
+                    OLD.devGUID,  -- ObjectGUID
+                    OLD.devMac,  -- ObjectPrimaryID
+                    OLD.devLastIP,  -- ObjectSecondaryID
+                    CASE WHEN OLD.devPresentLastScan = 1 THEN 'online' ELSE 'offline' END,  -- ObjectStatus
+                    'devPresentLastScan',  -- ObjectStatusColumn
+                    OLD.devIsNew,  -- ObjectIsNew
+                    OLD.devIsArchived,  -- ObjectIsArchived
+                    OLD.devGUID,  -- ObjectForeignKey
+                    'DEVICES',  -- ObjectForeignKey
+                    'delete'
+                );
+            END;

back/device_heuristics_rules.json

@@ -0,0 +1,200 @@
+[
+  {
+    "dev_type": "Gateway",
+    "icon_html": "<i class=\"fa fa-globe\"></i>",
+    "matching_pattern": [
+      { "mac_prefix": "INTERNET", "vendor": "" }
+    ],
+    "name_pattern": []
+  },
+  {
+    "dev_type": "Access Point",
+    "icon_html": "<i class=\"fa fa-network-wired\"></i>",
+    "matching_pattern": [
+      { "mac_prefix": "74ACB9", "vendor": "Ubiquiti" },
+      { "mac_prefix": "002468", "vendor": "Cisco" },
+      { "mac_prefix": "F4F5D8", "vendor": "TP-Link" },
+      { "mac_prefix": "F88E85", "vendor": "Netgear" }
+    ],
+    "name_pattern": ["router", "gateway", "ap", "access point", "access-point", "switch"]
+  },
+  {
+    "dev_type": "Phone",
+    "icon_html": "<i class=\"fa-brands fa-apple\"></i>",
+    "matching_pattern": [
+      { "mac_prefix": "001A79", "vendor": "Apple" },
+      { "mac_prefix": "B0BE83", "vendor": "Samsung" },
+      { "mac_prefix": "BC926B", "vendor": "Motorola" }
+    ],
+    "name_pattern": ["iphone", "ipad", "pixel", "galaxy", "redmi"]
+  },
+  {
+    "dev_type": "Phone",
+    "icon_html": "<i class=\"fa-solid fa-mobile\"></i>",
+    "matching_pattern": [
+    ],
+    "name_pattern": ["android","samsung"]
+  },
+  {
+    "dev_type": "Tablet",
+    "icon_html": "<i class=\"fa fa-tablet\"></i>",
+    "matching_pattern": [
+      { "mac_prefix": "001B63", "vendor": "Apple" },
+      { "mac_prefix": "BC4C4C", "vendor": "Samsung" }
+    ],
+    "name_pattern": ["tablet", "pad"]
+  },  
+  {
+    "dev_type": "IoT",
+    "icon_html": "<i class=\"fa-brands fa-raspberry-pi\"></i>",
+    "matching_pattern": [
+      { "mac_prefix": "B827EB", "vendor": "Raspberry Pi" },
+      { "mac_prefix": "DCA632", "vendor": "Raspberry Pi" }
+    ],
+    "name_pattern": ["raspberry", "pi"]
+  },
+  {
+    "dev_type": "IoT",
+    "icon_html": "<i class=\"fa-solid fa-microchip\"></i>",
+    "matching_pattern": [
+      { "mac_prefix": "840D8E", "vendor": "Espressif" },
+      { "mac_prefix": "ECFABC", "vendor": "Espressif" },
+      { "mac_prefix": "7C9EBD", "vendor": "Espressif" }
+    ],
+    "name_pattern": ["raspberry", "pi"]
+  },
+  {
+    "dev_type": "Desktop",
+    "icon_html": "<i class=\"fa fa-desktop\"></i>",
+    "matching_pattern": [
+      { "mac_prefix": "001422", "vendor": "Dell" },
+      { "mac_prefix": "001874", "vendor": "Lenovo" },
+      { "mac_prefix": "00E04C", "vendor": "Hewlett Packard" }
+    ],
+    "name_pattern": ["desktop", "pc", "computer"]
+  },
+  {
+    "dev_type": "Laptop",
+    "icon_html": "<i class=\"fa fa-laptop\"></i>",
+    "matching_pattern": [
+      { "mac_prefix": "3C0754", "vendor": "HP" },
+      { "mac_prefix": "0017A4", "vendor": "Dell" },
+      { "mac_prefix": "F4CE46", "vendor": "Lenovo" },
+      { "mac_prefix": "409F38", "vendor": "Acer" }
+    ],
+    "name_pattern": ["macbook", "imac", "laptop", "notebook"]
+  },
+  {
+    "dev_type": "Server",
+    "icon_html": "<i class=\"fa fa-server\"></i>",
+    "matching_pattern": [
+      { "mac_prefix": "001CBF", "vendor": "Supermicro" },
+      { "mac_prefix": "002186", "vendor": "Dell" },
+      { "mac_prefix": "D02788", "vendor": "Hewlett Packard" },
+      { "mac_prefix": "002590", "vendor": "IBM" }
+    ],
+    "name_pattern": ["server", "nas"]
+  },
+  {
+    "dev_type": "VM",
+    "icon_html": "<i class=\"fa fa-server\"></i>",
+    "matching_pattern": [
+      { "mac_prefix": "525400", "vendor": "QEMU" },
+      { "mac_prefix": "005056", "vendor": "VMware" },
+      { "mac_prefix": "000C29", "vendor": "VMware" },
+      { "mac_prefix": "000569", "vendor": "VMware" },
+      { "mac_prefix": "00163E", "vendor": "Xen" },
+      { "mac_prefix": "080027", "vendor": "VirtualBox" }
+    ]
+  },
+  {
+    "dev_type": "TV",
+    "icon_html": "<i class=\"fa fa-tv\"></i>",
+    "matching_pattern": [
+      { "mac_prefix": "0013CE", "vendor": "Samsung" },
+      { "mac_prefix": "0017C8", "vendor": "LG" },
+      { "mac_prefix": "D46E0E", "vendor": "Sony" }
+    ],
+    "name_pattern": ["tv", "television", "smarttv"]
+  },
+  {
+    "dev_type": "Gaming Console",
+    "icon_html": "<i class=\"fa fa-gamepad\"></i>",
+    "matching_pattern": [
+      { "mac_prefix": "001FA7", "vendor": "Sony" },
+      { "mac_prefix": "7C04D0", "vendor": "Nintendo" },
+      { "mac_prefix": "EC26CA", "vendor": "Sony" }
+    ],
+    "name_pattern": ["playstation", "xbox"]
+  },
+  {
+    "dev_type": "Camera",
+    "icon_html": "<i class=\"fa fa-camera\"></i>",
+    "matching_pattern": [
+      { "mac_prefix": "A45E60", "vendor": "Hikvision" },
+      { "mac_prefix": "00408C", "vendor": "Axis" },
+      { "mac_prefix": "00156D", "vendor": "Amcrest" },
+      { "mac_prefix": "AC9E17", "vendor": "Reolink" }
+    ],
+    "name_pattern": ["camera", "cam", "webcam"]
+  },
+  {
+    "dev_type": "Smart Speaker",
+    "icon_html": "<i class=\"fa fa-volume-up\"></i>",
+    "matching_pattern": [
+      { "mac_prefix": "44650D", "vendor": "Amazon" },
+      { "mac_prefix": "74ACB9", "vendor": "Google" }
+    ],
+    "name_pattern": ["echo", "alexa", "dot"]
+  },
+  {
+    "dev_type": "Router",
+    "icon_html": "<i class=\"fa fa-random\"></i>",
+    "matching_pattern": [
+      { "mac_prefix": "000C29", "vendor": "Cisco" },
+      { "mac_prefix": "00155D", "vendor": "MikroTik" }
+    ],
+    "name_pattern": ["router", "gateway", "ap", "access point", "access-point"],
+    "ip_pattern": [
+      "^192\\.168\\.[0-1]\\.1$",
+      "^10\\.0\\.0\\.1$"
+    ]
+  },
+  {
+    "dev_type": "Smart Light",
+    "icon_html": "<i class=\"fa fa-lightbulb\"></i>",
+    "matching_pattern": [],
+    "name_pattern": ["hue", "lifx", "bulb"]
+  },
+  {
+    "dev_type": "Smart Home",
+    "icon_html": "<i class=\"fa fa-house\"></i>",
+    "matching_pattern": [],
+    "name_pattern": ["google", "chromecast", "nest"]
+  },
+  {
+    "dev_type": "Smartwatch",
+    "icon_html": "<i class=\"fa fa-watch\"></i>",
+    "matching_pattern": [],
+    "name_pattern": ["watch", "wear"]
+  },
+  {
+    "dev_type": "Printer",
+    "icon_html": "<i class=\"fa fa-print\"></i>",
+    "matching_pattern": [],
+    "name_pattern": ["printer", "print"]
+  },
+  {
+    "dev_type": "Security Device",
+    "icon_html": "<i class=\"fa fa-shield-alt\"></i>",
+    "matching_pattern": [],
+    "name_pattern": ["doorbell", "lock", "security"]
+  },
+  {
+    "dev_type": "Smart Light",
+    "icon_html": "<i class=\"fa-solid fa-lightbulb\"></i>",
+    "matching_pattern": [
+    ],
+    "name_pattern": ["light","bulb"]
+  }
+]

db/.gitignore

@@ -1,2 +0,0 @@
-*
-!.gitignore

docker-compose.yml

@@ -1,77 +1,75 @@
 services:
   netalertx:
-    privileged: true
+  #use an environmental variable to set host networking mode if needed
+    network_mode: ${NETALERTX_NETWORK_MODE:-host}   # Use host networking for ARP scanning and other services
     build:
-      dockerfile: Dockerfile
-      context: .
-      cache_from:
-        - type=registry,ref=docker.io/jokob-sk/netalertx:buildcache
-    container_name: netalertx
-    network_mode: host
-    # restart: unless-stopped
-    volumes:
-      # - ${APP_DATA_LOCATION}/netalertx_dev/config:/app/config
-      - ${APP_DATA_LOCATION}/netalertx/config:/app/config
-      # - ${APP_DATA_LOCATION}/netalertx_dev/db:/app/db      
-      - ${APP_DATA_LOCATION}/netalertx/db:/app/db           
-      # (optional) useful for debugging if you have issues setting up the container
-      - ${APP_DATA_LOCATION}/netalertx/log:/app/log      
-      # (API: OPTION 1) use for performance
-      - type: tmpfs
-        target: /app/api
-      # (API: OPTION 2) use when debugging issues 
-      # - ${DEV_LOCATION}/api:/app/api
-      # ---------------------------------------------------------------------------
-      # DELETE START anyone trying to use this file: comment out / delete BELOW lines, they are only for development purposes
-      - ${APP_DATA_LOCATION}/netalertx/dhcp_samples/dhcp1.leases:/mnt/dhcp1.leases
-      - ${APP_DATA_LOCATION}/netalertx/dhcp_samples/dhcp2.leases:/mnt/dhcp2.leases      
-      - ${APP_DATA_LOCATION}/netalertx/dhcp_samples/pihole_dhcp_full.leases:/etc/pihole/dhcp.leases      
-      - ${APP_DATA_LOCATION}/netalertx/dhcp_samples/pihole_dhcp_2.leases:/etc/pihole/dhcp2.leases      
-      - ${APP_DATA_LOCATION}/pihole/etc-pihole/pihole-FTL.db:/etc/pihole/pihole-FTL.db    
-      - ${DEV_LOCATION}/mkdocs.yml:/app/mkdocs.yml
-      - ${DEV_LOCATION}/docs:/app/docs
-      - ${DEV_LOCATION}/server:/app/server            
-      - ${DEV_LOCATION}/test:/app/test            
-      - ${DEV_LOCATION}/dockerfiles:/app/dockerfiles
-      # - ${APP_DATA_LOCATION}/netalertx/php.ini:/etc/php/8.2/fpm/php.ini      
-      - ${DEV_LOCATION}/install:/app/install
-      - ${DEV_LOCATION}/front/css:/app/front/css
-      - ${DEV_LOCATION}/front/img:/app/front/img
-      - ${DEV_LOCATION}/back/update_vendors.sh:/app/back/update_vendors.sh
-      - ${DEV_LOCATION}/front/lib:/app/front/lib
-      - ${DEV_LOCATION}/front/js:/app/front/js
-      - ${DEV_LOCATION}/front/php:/app/front/php      
-      - ${DEV_LOCATION}/front/deviceDetails.php:/app/front/deviceDetails.php
-      - ${DEV_LOCATION}/front/deviceDetailsEdit.php:/app/front/deviceDetailsEdit.php
-      - ${DEV_LOCATION}/front/userNotifications.php:/app/front/userNotifications.php
-      - ${DEV_LOCATION}/front/deviceDetailsTools.php:/app/front/deviceDetailsTools.php
-      - ${DEV_LOCATION}/front/deviceDetailsPresence.php:/app/front/deviceDetailsPresence.php
-      - ${DEV_LOCATION}/front/deviceDetailsSessions.php:/app/front/deviceDetailsSessions.php
-      - ${DEV_LOCATION}/front/deviceDetailsEvents.php:/app/front/deviceDetailsEvents.php
-      - ${DEV_LOCATION}/front/devices.php:/app/front/devices.php
-      - ${DEV_LOCATION}/front/events.php:/app/front/events.php
-      - ${DEV_LOCATION}/front/plugins.php:/app/front/plugins.php
-      - ${DEV_LOCATION}/front/pluginsCore.php:/app/front/pluginsCore.php
-      - ${DEV_LOCATION}/front/help_faq.php:/app/front/help_faq.php
-      - ${DEV_LOCATION}/front/index.php:/app/front/index.php
-      - ${DEV_LOCATION}/front/maintenance.php:/app/front/maintenance.php
-      - ${DEV_LOCATION}/front/network.php:/app/front/network.php
-      - ${DEV_LOCATION}/front/presence.php:/app/front/presence.php
-      - ${DEV_LOCATION}/front/settings.php:/app/front/settings.php      
-      - ${DEV_LOCATION}/front/systeminfo.php:/app/front/systeminfo.php      
-      - ${DEV_LOCATION}/front/cloud_services.php:/app/front/cloud_services.php      
-      - ${DEV_LOCATION}/front/report.php:/app/front/report.php      
-      - ${DEV_LOCATION}/front/workflows.php:/app/front/workflows.php      
-      - ${DEV_LOCATION}/front/appEventsCore.php:/app/front/appEventsCore.php      
-      - ${DEV_LOCATION}/front/multiEditCore.php:/app/front/multiEditCore.php      
-      - ${DEV_LOCATION}/front/plugins:/app/front/plugins      
-      # DELETE END anyone trying to use this file: comment out / delete ABOVE lines, they are only for development purposes
-      # ---------------------------------------------------------------------------
-    environment:      
-      # - APP_CONF_OVERRIDE={"SCAN_SUBNETS":"['192.168.1.0/24 --interface=eth1']","GRAPHQL_PORT":"20223","UI_theme":"Light"}
-      - TZ=${TZ}
-      - PORT=${PORT}      
-      # ❗ DANGER ZONE BELOW - Setting ALWAYS_FRESH_INSTALL=true will delete the content of the /db & /config folders
-      - ALWAYS_FRESH_INSTALL=${ALWAYS_FRESH_INSTALL}
-      # - LOADED_PLUGINS=["DHCPLSS","PIHOLE","ASUSWRT","FREEBOX"]
+      context: .                                    # Build context is the current directory
+      dockerfile: Dockerfile                        # Specify the Dockerfile to use
+    image: netalertx:latest
+    container_name: netalertx                       # The name when you docker contiainer ls
+    read_only: true                                 # Make the container filesystem read-only
+    cap_drop:                                       # Drop all capabilities for enhanced security
+      - ALL
+    cap_add:                                        # Add only the necessary capabilities
+      - NET_ADMIN                                   # Required for ARP scanning
+      - NET_RAW                                     # Required for raw socket operations
+      - NET_BIND_SERVICE                            # Required to bind to privileged ports (nbtscan)
 
+    volumes:
+
+      - type: volume                                # Persistent Docker-managed Named Volume for storage
+        source: netalertx_data                      # the default name of the volume is netalertx_data
+        target: /data                               # consolidated configuration and database storage
+        read_only: false                            # writable volume
+
+    # Example custom local folder called /home/user/netalertx_data
+    # - type: bind
+    #   source: /home/user/netalertx_data
+    #   target: /data
+    #   read_only: false
+    # ... or use the alternative format
+    # - /home/user/netalertx_data:/data:rw
+
+      - type: bind                           # Bind mount for timezone consistency
+        source: /etc/localtime
+        target: /etc/localtime
+        read_only: true
+
+  # Use a custom Enterprise-configured nginx config for ldap or other settings
+  # - /custom-enterprise.conf:/tmp/nginx/active-config/netalertx.conf:ro
+
+      # Test your plugin on the production container
+      # - /path/on/host:/app/front/plugins/custom
+
+  # Retain logs - comment out tmpfs /tmp/log if you want to retain logs between container restarts
+  # - /path/on/host/log:/tmp/log
+
+    # tmpfs mounts for writable directories in a read-only container and improve system performance
+    # All writes now live under /tmp/* subdirectories which are created dynamically by entrypoint.d scripts
+    # uid=20211 and gid=20211 is the netalertx user inside the container
+    # mode=1700 gives rwx------ permissions to the netalertx user only
+    tmpfs:
+      - "/tmp:uid=20211,gid=20211,mode=1700,rw,noexec,nosuid,nodev,async,noatime,nodiratime"
+    environment:
+      LISTEN_ADDR: ${LISTEN_ADDR:-0.0.0.0}                      # Listen for connections on all interfaces
+      PORT: ${PORT:-20211}                                      # Application port
+      GRAPHQL_PORT: ${GRAPHQL_PORT:-20212}                      # GraphQL API port
+      ALWAYS_FRESH_INSTALL: ${ALWAYS_FRESH_INSTALL:-false}      # Set to true to reset your config and database on each container start
+      NETALERTX_DEBUG: ${NETALERTX_DEBUG:-0}                    # 0=kill all services and restart if any dies. 1 keeps running dead services.
+
+    # Resource limits to prevent resource exhaustion
+    mem_limit: 2048m            # Maximum memory usage
+    mem_reservation: 1024m      # Soft memory limit
+    cpu_shares: 512             # Relative CPU weight for CPU contention scenarios
+    pids_limit: 512             # Limit the number of processes/threads to prevent fork bombs
+    logging:
+      driver: "json-file"       # Use JSON file logging driver
+      options:
+        max-size: "10m"         # Rotate log files after they reach 10MB
+        max-file: "3"           # Keep a maximum of 3 log files
+
+    # Always restart the container unless explicitly stopped
+    restart: unless-stopped
+
+volumes:                        # Persistent volume for configuration and database storage
+  netalertx_data:

docker_build.log

@@ -0,0 +1,534 @@
+#0 building with "default" instance using docker driver
+
+#1 [internal] load build definition from Dockerfile
+#1 transferring dockerfile: 5.29kB done
+#1 DONE 0.1s
+
+#2 [auth] library/alpine:pull token for registry-1.docker.io
+#2 DONE 0.0s
+
+#3 [internal] load metadata for docker.io/library/alpine:3.22
+#3 DONE 0.4s
+
+#4 [internal] load .dockerignore
+#4 transferring context: 216B done
+#4 DONE 0.1s
+
+#5 [builder  1/15] FROM docker.io/library/alpine:3.22@sha256:4bcff63911fcb4448bd4fdacec207030997caf25e9bea4045fa6c8c44de311d1
+#5 CACHED
+
+#6 [internal] load build context
+#6 transferring context: 36.76kB 0.0s done
+#6 DONE 0.1s
+
+#7 [builder  2/15] RUN apk add --no-cache bash shadow python3 python3-dev gcc musl-dev libffi-dev openssl-dev git     && python -m venv /opt/venv
+#7 0.443 fetch https://dl-cdn.alpinelinux.org/alpine/v3.22/main/x86_64/APKINDEX.tar.gz
+#7 0.688 fetch https://dl-cdn.alpinelinux.org/alpine/v3.22/community/x86_64/APKINDEX.tar.gz
+#7 1.107 (1/52) Upgrading libcrypto3 (3.5.1-r0 -> 3.5.3-r0)
+#7 1.358 (2/52) Upgrading libssl3 (3.5.1-r0 -> 3.5.3-r0)
+#7 1.400 (3/52) Installing ncurses-terminfo-base (6.5_p20250503-r0)
+#7 1.413 (4/52) Installing libncursesw (6.5_p20250503-r0)
+#7 1.444 (5/52) Installing readline (8.2.13-r1)
+#7 1.471 (6/52) Installing bash (5.2.37-r0)
+#7 1.570 Executing bash-5.2.37-r0.post-install
+#7 1.593 (7/52) Installing libgcc (14.2.0-r6)
+#7 1.605 (8/52) Installing jansson (2.14.1-r0)
+#7 1.613 (9/52) Installing libstdc++ (14.2.0-r6)
+#7 1.705 (10/52) Installing zstd-libs (1.5.7-r0)
+#7 1.751 (11/52) Installing binutils (2.44-r3)
+#7 2.041 (12/52) Installing libgomp (14.2.0-r6)
+#7 2.064 (13/52) Installing libatomic (14.2.0-r6)
+#7 2.071 (14/52) Installing gmp (6.3.0-r3)
+#7 2.097 (15/52) Installing isl26 (0.26-r1)
+#7 2.183 (16/52) Installing mpfr4 (4.2.1_p1-r0)
+#7 2.219 (17/52) Installing mpc1 (1.3.1-r1)
+#7 2.231 (18/52) Installing gcc (14.2.0-r6)
+#7 6.782 (19/52) Installing brotli-libs (1.1.0-r2)
+#7 6.828 (20/52) Installing c-ares (1.34.5-r0)
+#7 6.846 (21/52) Installing libunistring (1.3-r0)
+#7 6.919 (22/52) Installing libidn2 (2.3.7-r0)
+#7 6.937 (23/52) Installing nghttp2-libs (1.65.0-r0)
+#7 6.950 (24/52) Installing libpsl (0.21.5-r3)
+#7 6.960 (25/52) Installing libcurl (8.14.1-r1)
+#7 7.015 (26/52) Installing libexpat (2.7.2-r0)
+#7 7.029 (27/52) Installing pcre2 (10.43-r1)
+#7 7.069 (28/52) Installing git (2.49.1-r0)
+#7 7.397 (29/52) Installing git-init-template (2.49.1-r0)
+#7 7.404 (30/52) Installing linux-headers (6.14.2-r0)
+#7 7.572 (31/52) Installing libffi (3.4.8-r0)
+#7 7.578 (32/52) Installing pkgconf (2.4.3-r0)
+#7 7.593 (33/52) Installing libffi-dev (3.4.8-r0)
+#7 7.607 (34/52) Installing musl-dev (1.2.5-r10)
+#7 7.961 (35/52) Installing openssl-dev (3.5.3-r0)
+#7 8.021 (36/52) Installing libbz2 (1.0.8-r6)
+#7 8.045 (37/52) Installing gdbm (1.24-r0)
+#7 8.055 (38/52) Installing xz-libs (5.8.1-r0)
+#7 8.071 (39/52) Installing mpdecimal (4.0.1-r0)
+#7 8.090 (40/52) Installing libpanelw (6.5_p20250503-r0)
+#7 8.098 (41/52) Installing sqlite-libs (3.49.2-r1)
+#7 8.185 (42/52) Installing python3 (3.12.11-r0)
+#7 8.904 (43/52) Installing python3-pycache-pyc0 (3.12.11-r0)
+#7 9.292 (44/52) Installing pyc (3.12.11-r0)
+#7 9.292 (45/52) Installing python3-pyc (3.12.11-r0)
+#7 9.292 (46/52) Installing python3-dev (3.12.11-r0)
+#7 10.71 (47/52) Installing libmd (1.1.0-r0)
+#7 10.72 (48/52) Installing libbsd (0.12.2-r0)
+#7 10.73 (49/52) Installing skalibs-libs (2.14.4.0-r0)
+#7 10.75 (50/52) Installing utmps-libs (0.1.3.1-r0)
+#7 10.76 (51/52) Installing linux-pam (1.7.0-r4)
+#7 10.82 (52/52) Installing shadow (4.17.3-r0)
+#7 10.88 Executing busybox-1.37.0-r18.trigger
+#7 10.90 OK: 274 MiB in 66 packages
+#7 DONE 14.4s
+
+#8 [builder  3/15] RUN mkdir -p /app
+#8 DONE 0.5s
+
+#9 [builder  4/15] COPY api /app/api
+#9 DONE 0.3s
+
+#10 [builder  5/15] COPY back /app/back
+#10 DONE 0.3s
+
+#11 [builder  6/15] COPY config /app/config
+#11 DONE 0.3s
+
+#12 [builder  7/15] COPY db /app/db
+#12 DONE 0.3s
+
+#13 [builder  8/15] COPY dockerfiles /app/dockerfiles
+#13 DONE 0.3s
+
+#14 [builder  9/15] COPY front /app/front
+#14 DONE 0.4s
+
+#15 [builder 10/15] COPY server /app/server
+#15 DONE 0.3s
+
+#16 [builder 11/15] COPY install/crontab /etc/crontabs/root
+#16 DONE 0.3s
+
+#17 [builder 12/15] COPY dockerfiles/start* /start*.sh
+#17 DONE 0.3s
+
+#18 [builder 13/15] RUN pip install openwrt-luci-rpc asusrouter asyncio aiohttp graphene flask flask-cors unifi-sm-api tplink-omada-client wakeonlan pycryptodome requests paho-mqtt scapy cron-converter pytz json2table dhcp-leases pyunifi speedtest-cli chardet python-nmap dnspython librouteros yattag git+https://github.com/foreign-sub/aiofreepybox.git
+#18 0.737 Collecting git+https://github.com/foreign-sub/aiofreepybox.git
+#18 0.737   Cloning https://github.com/foreign-sub/aiofreepybox.git to /tmp/pip-req-build-waf5_npl
+#18 0.738   Running command git clone --filter=blob:none --quiet https://github.com/foreign-sub/aiofreepybox.git /tmp/pip-req-build-waf5_npl
+#18 1.617   Resolved https://github.com/foreign-sub/aiofreepybox.git to commit 4ee18ea0f3e76edc839c48eb8df1da59c1baee3d
+#18 1.620   Installing build dependencies: started
+#18 3.337   Installing build dependencies: finished with status 'done'
+#18 3.337   Getting requirements to build wheel: started
+#18 3.491   Getting requirements to build wheel: finished with status 'done'
+#18 3.492   Preparing metadata (pyproject.toml): started
+#18 3.650   Preparing metadata (pyproject.toml): finished with status 'done'
+#18 3.724 Collecting openwrt-luci-rpc
+#18 3.753   Downloading openwrt_luci_rpc-1.1.17-py2.py3-none-any.whl.metadata (4.9 kB)
+#18 3.892 Collecting asusrouter
+#18 3.900   Downloading asusrouter-1.21.0-py3-none-any.whl.metadata (33 kB)
+#18 3.999 Collecting asyncio
+#18 4.007   Downloading asyncio-4.0.0-py3-none-any.whl.metadata (994 bytes)
+#18 4.576 Collecting aiohttp
+#18 4.582   Downloading aiohttp-3.12.15-cp312-cp312-musllinux_1_2_x86_64.whl.metadata (7.7 kB)
+#18 4.729 Collecting graphene
+#18 4.735   Downloading graphene-3.4.3-py2.py3-none-any.whl.metadata (6.9 kB)
+#18 4.858 Collecting flask
+#18 4.866   Downloading flask-3.1.2-py3-none-any.whl.metadata (3.2 kB)
+#18 4.963 Collecting flask-cors
+#18 4.972   Downloading flask_cors-6.0.1-py3-none-any.whl.metadata (5.3 kB)
+#18 5.055 Collecting unifi-sm-api
+#18 5.065   Downloading unifi_sm_api-0.2.1-py3-none-any.whl.metadata (2.3 kB)
+#18 5.155 Collecting tplink-omada-client
+#18 5.166   Downloading tplink_omada_client-1.4.4-py3-none-any.whl.metadata (3.5 kB)
+#18 5.262 Collecting wakeonlan
+#18 5.274   Downloading wakeonlan-3.1.0-py3-none-any.whl.metadata (4.3 kB)
+#18 5.500 Collecting pycryptodome
+#18 5.505   Downloading pycryptodome-3.23.0-cp37-abi3-musllinux_1_2_x86_64.whl.metadata (3.4 kB)
+#18 5.653 Collecting requests
+#18 5.660   Downloading requests-2.32.5-py3-none-any.whl.metadata (4.9 kB)
+#18 5.764 Collecting paho-mqtt
+#18 5.775   Downloading paho_mqtt-2.1.0-py3-none-any.whl.metadata (23 kB)
+#18 5.890 Collecting scapy
+#18 5.902   Downloading scapy-2.6.1-py3-none-any.whl.metadata (5.6 kB)
+#18 6.002 Collecting cron-converter
+#18 6.013   Downloading cron_converter-1.2.2-py3-none-any.whl.metadata (8.1 kB)
+#18 6.187 Collecting pytz
+#18 6.193   Downloading pytz-2025.2-py2.py3-none-any.whl.metadata (22 kB)
+#18 6.285 Collecting json2table
+#18 6.294   Downloading json2table-1.1.5-py2.py3-none-any.whl.metadata (6.0 kB)
+#18 6.381 Collecting dhcp-leases
+#18 6.387   Downloading dhcp_leases-0.1.6-py3-none-any.whl.metadata (5.9 kB)
+#18 6.461 Collecting pyunifi
+#18 6.471   Downloading pyunifi-2.21-py3-none-any.whl.metadata (274 bytes)
+#18 6.582 Collecting speedtest-cli
+#18 6.596   Downloading speedtest_cli-2.1.3-py2.py3-none-any.whl.metadata (6.8 kB)
+#18 6.767 Collecting chardet
+#18 6.780   Downloading chardet-5.2.0-py3-none-any.whl.metadata (3.4 kB)
+#18 6.878 Collecting python-nmap
+#18 6.886   Downloading python-nmap-0.7.1.tar.gz (44 kB)
+#18 6.937   Installing build dependencies: started
+#18 8.245   Installing build dependencies: finished with status 'done'
+#18 8.246   Getting requirements to build wheel: started
+#18 8.411   Getting requirements to build wheel: finished with status 'done'
+#18 8.412   Preparing metadata (pyproject.toml): started
+#18 8.575   Preparing metadata (pyproject.toml): finished with status 'done'
+#18 8.648 Collecting dnspython
+#18 8.654   Downloading dnspython-2.8.0-py3-none-any.whl.metadata (5.7 kB)
+#18 8.741 Collecting librouteros
+#18 8.752   Downloading librouteros-3.4.1-py3-none-any.whl.metadata (1.6 kB)
+#18 8.869 Collecting yattag
+#18 8.881   Downloading yattag-1.16.1.tar.gz (29 kB)
+#18 8.925   Installing build dependencies: started
+#18 10.23   Installing build dependencies: finished with status 'done'
+#18 10.23   Getting requirements to build wheel: started
+#18 10.38   Getting requirements to build wheel: finished with status 'done'
+#18 10.39   Preparing metadata (pyproject.toml): started
+#18 10.55   Preparing metadata (pyproject.toml): finished with status 'done'
+#18 10.60 Collecting Click>=6.0 (from openwrt-luci-rpc)
+#18 10.60   Downloading click-8.3.0-py3-none-any.whl.metadata (2.6 kB)
+#18 10.70 Collecting packaging>=19.1 (from openwrt-luci-rpc)
+#18 10.71   Downloading packaging-25.0-py3-none-any.whl.metadata (3.3 kB)
+#18 10.87 Collecting urllib3>=1.26.14 (from asusrouter)
+#18 10.88   Downloading urllib3-2.5.0-py3-none-any.whl.metadata (6.5 kB)
+#18 10.98 Collecting xmltodict>=0.12.0 (from asusrouter)
+#18 10.98   Downloading xmltodict-1.0.2-py3-none-any.whl.metadata (15 kB)
+#18 11.09 Collecting aiohappyeyeballs>=2.5.0 (from aiohttp)
+#18 11.10   Downloading aiohappyeyeballs-2.6.1-py3-none-any.whl.metadata (5.9 kB)
+#18 11.19 Collecting aiosignal>=1.4.0 (from aiohttp)
+#18 11.20   Downloading aiosignal-1.4.0-py3-none-any.whl.metadata (3.7 kB)
+#18 11.32 Collecting attrs>=17.3.0 (from aiohttp)
+#18 11.33   Downloading attrs-25.3.0-py3-none-any.whl.metadata (10 kB)
+#18 11.47 Collecting frozenlist>=1.1.1 (from aiohttp)
+#18 11.47   Downloading frozenlist-1.7.0-cp312-cp312-musllinux_1_2_x86_64.whl.metadata (18 kB)
+#18 11.76 Collecting multidict<7.0,>=4.5 (from aiohttp)
+#18 11.77   Downloading multidict-6.6.4-cp312-cp312-musllinux_1_2_x86_64.whl.metadata (5.3 kB)
+#18 11.87 Collecting propcache>=0.2.0 (from aiohttp)
+#18 11.88   Downloading propcache-0.3.2-cp312-cp312-musllinux_1_2_x86_64.whl.metadata (12 kB)
+#18 12.19 Collecting yarl<2.0,>=1.17.0 (from aiohttp)
+#18 12.20   Downloading yarl-1.20.1-cp312-cp312-musllinux_1_2_x86_64.whl.metadata (73 kB)
+#18 12.31 Collecting graphql-core<3.3,>=3.1 (from graphene)
+#18 12.32   Downloading graphql_core-3.2.6-py3-none-any.whl.metadata (11 kB)
+#18 12.41 Collecting graphql-relay<3.3,>=3.1 (from graphene)
+#18 12.42   Downloading graphql_relay-3.2.0-py3-none-any.whl.metadata (12 kB)
+#18 12.50 Collecting python-dateutil<3,>=2.7.0 (from graphene)
+#18 12.51   Downloading python_dateutil-2.9.0.post0-py2.py3-none-any.whl.metadata (8.4 kB)
+#18 12.61 Collecting typing-extensions<5,>=4.7.1 (from graphene)
+#18 12.61   Downloading typing_extensions-4.15.0-py3-none-any.whl.metadata (3.3 kB)
+#18 12.71 Collecting blinker>=1.9.0 (from flask)
+#18 12.72   Downloading blinker-1.9.0-py3-none-any.whl.metadata (1.6 kB)
+#18 12.84 Collecting itsdangerous>=2.2.0 (from flask)
+#18 12.85   Downloading itsdangerous-2.2.0-py3-none-any.whl.metadata (1.9 kB)
+#18 12.97 Collecting jinja2>=3.1.2 (from flask)
+#18 12.98   Downloading jinja2-3.1.6-py3-none-any.whl.metadata (2.9 kB)
+#18 13.15 Collecting markupsafe>=2.1.1 (from flask)
+#18 13.15   Downloading MarkupSafe-3.0.2-cp312-cp312-musllinux_1_2_x86_64.whl.metadata (4.0 kB)
+#18 13.28 Collecting werkzeug>=3.1.0 (from flask)
+#18 13.29   Downloading werkzeug-3.1.3-py3-none-any.whl.metadata (3.7 kB)
+#18 13.42 Collecting awesomeversion>=22.9.0 (from tplink-omada-client)
+#18 13.42   Downloading awesomeversion-25.8.0-py3-none-any.whl.metadata (9.8 kB)
+#18 13.59 Collecting charset_normalizer<4,>=2 (from requests)
+#18 13.59   Downloading charset_normalizer-3.4.3-cp312-cp312-musllinux_1_2_x86_64.whl.metadata (36 kB)
+#18 13.77 Collecting idna<4,>=2.5 (from requests)
+#18 13.78   Downloading idna-3.10-py3-none-any.whl.metadata (10 kB)
+#18 13.94 Collecting certifi>=2017.4.17 (from requests)
+#18 13.94   Downloading certifi-2025.8.3-py3-none-any.whl.metadata (2.4 kB)
+#18 14.06 Collecting toml<0.11.0,>=0.10.2 (from librouteros)
+#18 14.07   Downloading toml-0.10.2-py2.py3-none-any.whl.metadata (7.1 kB)
+#18 14.25 Collecting six>=1.5 (from python-dateutil<3,>=2.7.0->graphene)
+#18 14.26   Downloading six-1.17.0-py2.py3-none-any.whl.metadata (1.7 kB)
+#18 14.33 Downloading openwrt_luci_rpc-1.1.17-py2.py3-none-any.whl (9.5 kB)
+#18 14.37 Downloading asusrouter-1.21.0-py3-none-any.whl (131 kB)
+#18 14.43 Downloading asyncio-4.0.0-py3-none-any.whl (5.6 kB)
+#18 14.47 Downloading aiohttp-3.12.15-cp312-cp312-musllinux_1_2_x86_64.whl (1.7 MB)
+#18 14.67    ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.7/1.7 MB 8.3 MB/s eta 0:00:00
+#18 14.68 Downloading graphene-3.4.3-py2.py3-none-any.whl (114 kB)
+#18 14.73 Downloading flask-3.1.2-py3-none-any.whl (103 kB)
+#18 14.78 Downloading flask_cors-6.0.1-py3-none-any.whl (13 kB)
+#18 14.84 Downloading unifi_sm_api-0.2.1-py3-none-any.whl (16 kB)
+#18 14.88 Downloading tplink_omada_client-1.4.4-py3-none-any.whl (46 kB)
+#18 14.93 Downloading wakeonlan-3.1.0-py3-none-any.whl (5.0 kB)
+#18 14.99 Downloading pycryptodome-3.23.0-cp37-abi3-musllinux_1_2_x86_64.whl (2.3 MB)
+#18 15.23    ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2.3/2.3 MB 8.9 MB/s eta 0:00:00
+#18 15.24 Downloading requests-2.32.5-py3-none-any.whl (64 kB)
+#18 15.30 Downloading paho_mqtt-2.1.0-py3-none-any.whl (67 kB)
+#18 15.34 Downloading scapy-2.6.1-py3-none-any.whl (2.4 MB)
+#18 15.62    ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2.4/2.4 MB 8.5 MB/s eta 0:00:00
+#18 15.63 Downloading cron_converter-1.2.2-py3-none-any.whl (13 kB)
+#18 15.67 Downloading pytz-2025.2-py2.py3-none-any.whl (509 kB)
+#18 15.76 Downloading json2table-1.1.5-py2.py3-none-any.whl (8.7 kB)
+#18 15.81 Downloading dhcp_leases-0.1.6-py3-none-any.whl (11 kB)
+#18 15.86 Downloading pyunifi-2.21-py3-none-any.whl (11 kB)
+#18 15.90 Downloading speedtest_cli-2.1.3-py2.py3-none-any.whl (23 kB)
+#18 15.95 Downloading chardet-5.2.0-py3-none-any.whl (199 kB)
+#18 16.01 Downloading dnspython-2.8.0-py3-none-any.whl (331 kB)
+#18 16.10 Downloading librouteros-3.4.1-py3-none-any.whl (16 kB)
+#18 16.14 Downloading aiohappyeyeballs-2.6.1-py3-none-any.whl (15 kB)
+#18 16.20 Downloading aiosignal-1.4.0-py3-none-any.whl (7.5 kB)
+#18 16.24 Downloading attrs-25.3.0-py3-none-any.whl (63 kB)
+#18 16.30 Downloading awesomeversion-25.8.0-py3-none-any.whl (15 kB)
+#18 16.34 Downloading blinker-1.9.0-py3-none-any.whl (8.5 kB)
+#18 16.39 Downloading certifi-2025.8.3-py3-none-any.whl (161 kB)
+#18 16.45 Downloading charset_normalizer-3.4.3-cp312-cp312-musllinux_1_2_x86_64.whl (153 kB)
+#18 16.50 Downloading click-8.3.0-py3-none-any.whl (107 kB)
+#18 16.55 Downloading frozenlist-1.7.0-cp312-cp312-musllinux_1_2_x86_64.whl (237 kB)
+#18 16.62 Downloading graphql_core-3.2.6-py3-none-any.whl (203 kB)
+#18 16.69 Downloading graphql_relay-3.2.0-py3-none-any.whl (16 kB)
+#18 16.73 Downloading idna-3.10-py3-none-any.whl (70 kB)
+#18 16.79 Downloading itsdangerous-2.2.0-py3-none-any.whl (16 kB)
+#18 16.84 Downloading jinja2-3.1.6-py3-none-any.whl (134 kB)
+#18 16.96 Downloading MarkupSafe-3.0.2-cp312-cp312-musllinux_1_2_x86_64.whl (23 kB)
+#18 17.02 Downloading multidict-6.6.4-cp312-cp312-musllinux_1_2_x86_64.whl (251 kB)
+#18 17.09 Downloading packaging-25.0-py3-none-any.whl (66 kB)
+#18 17.14 Downloading propcache-0.3.2-cp312-cp312-musllinux_1_2_x86_64.whl (222 kB)
+#18 17.21 Downloading python_dateutil-2.9.0.post0-py2.py3-none-any.whl (229 kB)
+#18 17.28 Downloading toml-0.10.2-py2.py3-none-any.whl (16 kB)
+#18 17.33 Downloading typing_extensions-4.15.0-py3-none-any.whl (44 kB)
+#18 17.39 Downloading urllib3-2.5.0-py3-none-any.whl (129 kB)
+#18 17.44 Downloading werkzeug-3.1.3-py3-none-any.whl (224 kB)
+#18 17.51 Downloading xmltodict-1.0.2-py3-none-any.whl (13 kB)
+#18 17.56 Downloading yarl-1.20.1-cp312-cp312-musllinux_1_2_x86_64.whl (374 kB)
+#18 17.65 Downloading six-1.17.0-py2.py3-none-any.whl (11 kB)
+#18 17.77 Building wheels for collected packages: python-nmap, yattag, aiofreepybox
+#18 17.77   Building wheel for python-nmap (pyproject.toml): started
+#18 17.95   Building wheel for python-nmap (pyproject.toml): finished with status 'done'
+#18 17.96   Created wheel for python-nmap: filename=python_nmap-0.7.1-py2.py3-none-any.whl size=20679 sha256=ecd9b14109651cfaa5bf035f90076b9442985cc254fa5f8a49868fc896e86edb
+#18 17.96   Stored in directory: /root/.cache/pip/wheels/06/fc/d4/0957e1d9942e696188208772ea0abf909fe6eb3d9dff6e5a9e
+#18 17.96   Building wheel for yattag (pyproject.toml): started
+#18 18.14   Building wheel for yattag (pyproject.toml): finished with status 'done'
+#18 18.14   Created wheel for yattag: filename=yattag-1.16.1-py3-none-any.whl size=15930 sha256=2135fc2034a3847c81eb6a0d7b85608e8272339fa5c1961f87b02dfe6d74d0ad
+#18 18.14   Stored in directory: /root/.cache/pip/wheels/d2/2f/52/049ff4f7c8c9c932b2ece7ec800d7facf2a141ac5ab0ce7e51
+#18 18.15   Building wheel for aiofreepybox (pyproject.toml): started
+#18 18.36   Building wheel for aiofreepybox (pyproject.toml): finished with status 'done'
+#18 18.36   Created wheel for aiofreepybox: filename=aiofreepybox-6.0.0-py3-none-any.whl size=60051 sha256=dbdee5350b10b6550ede50bc779381b7f39f1e5d5da889f2ee98cb5a869d3425
+#18 18.36   Stored in directory: /tmp/pip-ephem-wheel-cache-93bgc4e2/wheels/3c/d3/ae/fb97a84a29a5fbe8517de58d67e66586505440af35981e0dd3
+#18 18.36 Successfully built python-nmap yattag aiofreepybox
+#18 18.45 Installing collected packages: yattag, speedtest-cli, pytz, python-nmap, json2table, dhcp-leases, xmltodict, wakeonlan, urllib3, typing-extensions, toml, six, scapy, pycryptodome, propcache, paho-mqtt, packaging, multidict, markupsafe, itsdangerous, idna, graphql-core, frozenlist, dnspython, Click, charset_normalizer, chardet, certifi, blinker, awesomeversion, attrs, asyncio, aiohappyeyeballs, yarl, werkzeug, requests, python-dateutil, librouteros, jinja2, graphql-relay, aiosignal, unifi-sm-api, pyunifi, openwrt-luci-rpc, graphene, flask, cron-converter, aiohttp, tplink-omada-client, flask-cors, asusrouter, aiofreepybox
+#18 24.35 Successfully installed Click-8.3.0 aiofreepybox-6.0.0 aiohappyeyeballs-2.6.1 aiohttp-3.12.15 aiosignal-1.4.0 asusrouter-1.21.0 asyncio-4.0.0 attrs-25.3.0 awesomeversion-25.8.0 blinker-1.9.0 certifi-2025.8.3 chardet-5.2.0 charset_normalizer-3.4.3 cron-converter-1.2.2 dhcp-leases-0.1.6 dnspython-2.8.0 flask-3.1.2 flask-cors-6.0.1 frozenlist-1.7.0 graphene-3.4.3 graphql-core-3.2.6 graphql-relay-3.2.0 idna-3.10 itsdangerous-2.2.0 jinja2-3.1.6 json2table-1.1.5 librouteros-3.4.1 markupsafe-3.0.2 multidict-6.6.4 openwrt-luci-rpc-1.1.17 packaging-25.0 paho-mqtt-2.1.0 propcache-0.3.2 pycryptodome-3.23.0 python-dateutil-2.9.0.post0 python-nmap-0.7.1 pytz-2025.2 pyunifi-2.21 requests-2.32.5 scapy-2.6.1 six-1.17.0 speedtest-cli-2.1.3 toml-0.10.2 tplink-omada-client-1.4.4 typing-extensions-4.15.0 unifi-sm-api-0.2.1 urllib3-2.5.0 wakeonlan-3.1.0 werkzeug-3.1.3 xmltodict-1.0.2 yarl-1.20.1 yattag-1.16.1
+#18 24.47 
+#18 24.47 [notice] A new release of pip is available: 25.0.1 -> 25.2
+#18 24.47 [notice] To update, run: pip install --upgrade pip
+#18 DONE 25.1s
+
+#19 [builder 14/15] RUN bash -c "find /app -type d -exec chmod 750 {} \;"     && bash -c "find /app -type f -exec chmod 640 {} \;"     && bash -c "find /app -type f \( -name '*.sh' -o -name '*.py'  -o -name 'speedtest-cli' \) -exec chmod 750 {} \;"
+#19 DONE 11.9s
+
+#20 [builder 15/15] COPY install/freebox_certificate.pem /opt/venv/lib/python3.12/site-packages/aiofreepybox/freebox_certificates.pem
+#20 DONE 0.4s
+
+#21 [runner  2/14] COPY --from=builder /opt/venv /opt/venv
+#21 DONE 0.8s
+
+#22 [runner  3/14] COPY --from=builder /usr/sbin/usermod /usr/sbin/groupmod /usr/sbin/
+#22 DONE 0.4s
+
+#23 [runner  4/14] RUN apk update --no-cache     && apk add --no-cache bash libbsd zip lsblk gettext-envsubst sudo mtr tzdata s6-overlay     && apk add --no-cache curl arp-scan iproute2 iproute2-ss nmap nmap-scripts traceroute nbtscan avahi avahi-tools openrc dbus net-tools net-snmp-tools bind-tools awake ca-certificates     && apk add --no-cache sqlite php83 php83-fpm php83-cgi php83-curl php83-sqlite3 php83-session     && apk add --no-cache python3 nginx     && ln -s /usr/bin/awake /usr/bin/wakeonlan     && bash -c "install -d -m 750 -o nginx -g www-data /app /app"     && rm -f /etc/nginx/http.d/default.conf
+#23 0.487 fetch https://dl-cdn.alpinelinux.org/alpine/v3.22/main/x86_64/APKINDEX.tar.gz
+#23 0.696 fetch https://dl-cdn.alpinelinux.org/alpine/v3.22/community/x86_64/APKINDEX.tar.gz
+#23 1.156 v3.22.1-472-ga67443520d6 [https://dl-cdn.alpinelinux.org/alpine/v3.22/main]
+#23 1.156 v3.22.1-473-gcd551a4e006 [https://dl-cdn.alpinelinux.org/alpine/v3.22/community]
+#23 1.156 OK: 26326 distinct packages available
+#23 1.195 fetch https://dl-cdn.alpinelinux.org/alpine/v3.22/main/x86_64/APKINDEX.tar.gz
+#23 1.276 fetch https://dl-cdn.alpinelinux.org/alpine/v3.22/community/x86_64/APKINDEX.tar.gz
+#23 1.568 (1/38) Installing ncurses-terminfo-base (6.5_p20250503-r0)
+#23 1.580 (2/38) Installing libncursesw (6.5_p20250503-r0)
+#23 1.629 (3/38) Installing readline (8.2.13-r1)
+#23 1.659 (4/38) Installing bash (5.2.37-r0)
+#23 1.723 Executing bash-5.2.37-r0.post-install
+#23 1.740 (5/38) Installing libintl (0.24.1-r0)
+#23 1.749 (6/38) Installing gettext-envsubst (0.24.1-r0)
+#23 1.775 (7/38) Installing libmd (1.1.0-r0)
+#23 1.782 (8/38) Installing libbsd (0.12.2-r0)
+#23 1.807 (9/38) Installing libeconf (0.6.3-r0)
+#23 1.812 (10/38) Installing libblkid (2.41-r9)
+#23 1.831 (11/38) Installing libmount (2.41-r9)
+#23 1.857 (12/38) Installing libsmartcols (2.41-r9)
+#23 1.872 (13/38) Installing lsblk (2.41-r9)
+#23 1.886 (14/38) Installing libcap2 (2.76-r0)
+#23 1.897 (15/38) Installing jansson (2.14.1-r0)
+#23 1.910 (16/38) Installing mtr (0.96-r0)
+#23 1.948 (17/38) Installing skalibs-libs (2.14.4.0-r0)
+#23 1.966 (18/38) Installing execline-libs (2.9.7.0-r0)
+#23 1.974 (19/38) Installing execline (2.9.7.0-r0)
+#23 1.996 Executing execline-2.9.7.0-r0.post-install
+#23 2.004 (20/38) Installing s6-ipcserver (2.13.2.0-r0)
+#23 2.010 (21/38) Installing s6-libs (2.13.2.0-r0)
+#23 2.016 (22/38) Installing s6 (2.13.2.0-r0)
+#23 2.033 Executing s6-2.13.2.0-r0.pre-install
+#23 2.159 (23/38) Installing s6-rc-libs (0.5.6.0-r0)
+#23 2.164 (24/38) Installing s6-rc (0.5.6.0-r0)
+#23 2.175 (25/38) Installing s6-linux-init (1.1.3.0-r0)
+#23 2.185 (26/38) Installing s6-portable-utils (2.3.1.0-r0)
+#23 2.193 (27/38) Installing s6-linux-utils (2.6.3.0-r0)
+#23 2.200 (28/38) Installing s6-dns-libs (2.4.1.0-r0)
+#23 2.208 (29/38) Installing s6-dns (2.4.1.0-r0)
+#23 2.222 (30/38) Installing bearssl-libs (0.6_git20241009-r0)
+#23 2.254 (31/38) Installing s6-networking-libs (2.7.1.0-r0)
+#23 2.264 (32/38) Installing s6-networking (2.7.1.0-r0)
+#23 2.286 (33/38) Installing s6-overlay-helpers (0.1.2.0-r0)
+#23 2.355 (34/38) Installing s6-overlay (3.2.0.3-r0)
+#23 2.380 (35/38) Installing sudo (1.9.17_p2-r0)
+#23 2.511 (36/38) Installing tzdata (2025b-r0)
+#23 2.641 (37/38) Installing unzip (6.0-r15)
+#23 2.659 (38/38) Installing zip (3.0-r13)
+#23 2.694 Executing busybox-1.37.0-r18.trigger
+#23 2.725 OK: 16 MiB in 54 packages
+#23 2.778 fetch https://dl-cdn.alpinelinux.org/alpine/v3.22/main/x86_64/APKINDEX.tar.gz
+#23 2.918 fetch https://dl-cdn.alpinelinux.org/alpine/v3.22/community/x86_64/APKINDEX.tar.gz
+#23 3.218 (1/77) Installing libpcap (1.10.5-r1)
+#23 3.234 (2/77) Installing arp-scan (1.10.0-r2)
+#23 3.289 (3/77) Installing dbus-libs (1.16.2-r1)
+#23 3.307 (4/77) Installing avahi-libs (0.8-r21)
+#23 3.315 (5/77) Installing libdaemon (0.14-r6)
+#23 3.322 (6/77) Installing libevent (2.1.12-r8)
+#23 3.355 (7/77) Installing libexpat (2.7.2-r0)
+#23 3.368 (8/77) Installing avahi (0.8-r21)
+#23 3.387 Executing avahi-0.8-r21.pre-install
+#23 3.465 (9/77) Installing gdbm (1.24-r0)
+#23 3.477 (10/77) Installing avahi-tools (0.8-r21)
+#23 3.483 (11/77) Installing libbz2 (1.0.8-r6)
+#23 3.490 (12/77) Installing libffi (3.4.8-r0)
+#23 3.496 (13/77) Installing xz-libs (5.8.1-r0)
+#23 3.517 (14/77) Installing libgcc (14.2.0-r6)
+#23 3.529 (15/77) Installing libstdc++ (14.2.0-r6)
+#23 3.613 (16/77) Installing mpdecimal (4.0.1-r0)
+#23 3.628 (17/77) Installing libpanelw (6.5_p20250503-r0)
+#23 3.634 (18/77) Installing sqlite-libs (3.49.2-r1)
+#23 3.783 (19/77) Installing python3 (3.12.11-r0)
+#23 4.494 (20/77) Installing python3-pycache-pyc0 (3.12.11-r0)
+#23 4.915 (21/77) Installing pyc (3.12.11-r0)
+#23 4.915 (22/77) Installing py3-awake-pyc (1.0-r12)
+#23 4.922 (23/77) Installing python3-pyc (3.12.11-r0)
+#23 4.922 (24/77) Installing py3-awake (1.0-r12)
+#23 4.928 (25/77) Installing awake (1.0-r12)
+#23 4.932 (26/77) Installing fstrm (0.6.1-r4)
+#23 4.940 (27/77) Installing krb5-conf (1.0-r2)
+#23 5.017 (28/77) Installing libcom_err (1.47.2-r2)
+#23 5.026 (29/77) Installing keyutils-libs (1.6.3-r4)
+#23 5.033 (30/77) Installing libverto (0.3.2-r2)
+#23 5.039 (31/77) Installing krb5-libs (1.21.3-r0)
+#23 5.115 (32/77) Installing json-c (0.18-r1)
+#23 5.123 (33/77) Installing nghttp2-libs (1.65.0-r0)
+#23 5.136 (34/77) Installing protobuf-c (1.5.2-r0)
+#23 5.142 (35/77) Installing userspace-rcu (0.15.2-r0)
+#23 5.161 (36/77) Installing libuv (1.51.0-r0)
+#23 5.178 (37/77) Installing libxml2 (2.13.8-r0)
+#23 5.232 (38/77) Installing bind-libs (9.20.13-r0)
+#23 5.355 (39/77) Installing bind-tools (9.20.13-r0)
+#23 5.395 (40/77) Installing ca-certificates (20250619-r0)
+#23 5.518 (41/77) Installing brotli-libs (1.1.0-r2)
+#23 5.559 (42/77) Installing c-ares (1.34.5-r0)
+#23 5.573 (43/77) Installing libunistring (1.3-r0)
+#23 5.645 (44/77) Installing libidn2 (2.3.7-r0)
+#23 5.664 (45/77) Installing libpsl (0.21.5-r3)
+#23 5.676 (46/77) Installing zstd-libs (1.5.7-r0)
+#23 5.720 (47/77) Installing libcurl (8.14.1-r1)
+#23 5.753 (48/77) Installing curl (8.14.1-r1)
+#23 5.778 (49/77) Installing dbus (1.16.2-r1)
+#23 5.796 Executing dbus-1.16.2-r1.pre-install
+#23 5.869 Executing dbus-1.16.2-r1.post-install
+#23 5.887 (50/77) Installing dbus-daemon-launch-helper (1.16.2-r1)
+#23 5.896 (51/77) Installing libelf (0.193-r0)
+#23 5.908 (52/77) Installing libmnl (1.0.5-r2)
+#23 5.915 (53/77) Installing iproute2-minimal (6.15.0-r0)
+#23 5.954 (54/77) Installing libxtables (1.8.11-r1)
+#23 5.963 (55/77) Installing iproute2-tc (6.15.0-r0)
+#23 6.001 (56/77) Installing iproute2-ss (6.15.0-r0)
+#23 6.014 (57/77) Installing iproute2 (6.15.0-r0)
+#23 6.042 Executing iproute2-6.15.0-r0.post-install
+#23 6.047 (58/77) Installing nbtscan (1.7.2-r0)
+#23 6.053 (59/77) Installing net-snmp-libs (5.9.4-r1)
+#23 6.112 (60/77) Installing net-snmp-agent-libs (5.9.4-r1)
+#23 6.179 (61/77) Installing net-snmp-tools (5.9.4-r1)
+#23 6.205 (62/77) Installing mii-tool (2.10-r3)
+#23 6.211 (63/77) Installing net-tools (2.10-r3)
+#23 6.235 (64/77) Installing lua5.4-libs (5.4.7-r0)
+#23 6.258 (65/77) Installing libssh2 (1.11.1-r0)
+#23 6.279 (66/77) Installing nmap (7.97-r0)
+#23 6.524 (67/77) Installing nmap-nselibs (7.97-r0)
+#23 6.729 (68/77) Installing nmap-scripts (7.97-r0)
+#23 6.842 (69/77) Installing bridge (1.5-r5)
+#23 6.904 (70/77) Installing ifupdown-ng (0.12.1-r7)
+#23 6.915 (71/77) Installing ifupdown-ng-iproute2 (0.12.1-r7)
+#23 6.920 (72/77) Installing openrc-user (0.62.6-r0)
+#23 6.924 (73/77) Installing openrc (0.62.6-r0)
+#23 7.013 Executing openrc-0.62.6-r0.post-install
+#23 7.016 (74/77) Installing avahi-openrc (0.8-r21)
+#23 7.021 (75/77) Installing dbus-openrc (1.16.2-r1)
+#23 7.026 (76/77) Installing s6-openrc (2.13.2.0-r0)
+#23 7.032 (77/77) Installing traceroute (2.1.6-r0)
+#23 7.040 Executing busybox-1.37.0-r18.trigger
+#23 7.042 Executing ca-certificates-20250619-r0.trigger
+#23 7.101 Executing dbus-1.16.2-r1.trigger
+#23 7.104 OK: 102 MiB in 131 packages
+#23 7.156 fetch https://dl-cdn.alpinelinux.org/alpine/v3.22/main/x86_64/APKINDEX.tar.gz
+#23 7.243 fetch https://dl-cdn.alpinelinux.org/alpine/v3.22/community/x86_64/APKINDEX.tar.gz
+#23 7.543 (1/12) Installing php83-common (8.3.24-r0)
+#23 7.551 (2/12) Installing argon2-libs (20190702-r5)
+#23 7.557 (3/12) Installing libedit (20250104.3.1-r1)
+#23 7.568 (4/12) Installing pcre2 (10.43-r1)
+#23 7.600 (5/12) Installing php83 (8.3.24-r0)
+#23 7.777 (6/12) Installing php83-cgi (8.3.24-r0)
+#23 7.953 (7/12) Installing php83-curl (8.3.24-r0)
+#23 7.968 (8/12) Installing acl-libs (2.3.2-r1)
+#23 7.975 (9/12) Installing php83-fpm (8.3.24-r0)
+#23 8.193 (10/12) Installing php83-session (8.3.24-r0)
+#23 8.204 (11/12) Installing php83-sqlite3 (8.3.24-r0)
+#23 8.213 (12/12) Installing sqlite (3.49.2-r1)
+#23 8.309 Executing busybox-1.37.0-r18.trigger
+#23 8.317 OK: 129 MiB in 143 packages
+#23 8.369 fetch https://dl-cdn.alpinelinux.org/alpine/v3.22/main/x86_64/APKINDEX.tar.gz
+#23 8.449 fetch https://dl-cdn.alpinelinux.org/alpine/v3.22/community/x86_64/APKINDEX.tar.gz
+#23 8.747 (1/2) Installing nginx (1.28.0-r3)
+#23 8.766 Executing nginx-1.28.0-r3.pre-install
+#23 8.863 Executing nginx-1.28.0-r3.post-install
+#23 8.865 (2/2) Installing nginx-openrc (1.28.0-r3)
+#23 8.870 Executing busybox-1.37.0-r18.trigger
+#23 8.873 OK: 130 MiB in 145 packages
+#23 DONE 9.5s
+
+#24 [runner  5/14] COPY --from=builder --chown=nginx:www-data /app/ /app/
+#24 DONE 0.5s
+
+#25 [runner  6/14] RUN mkdir -p /app/config /app/db /app/log/plugins
+#25 DONE 0.5s
+
+#26 [runner  7/14] COPY --chmod=600 --chown=root:root install/crontab /etc/crontabs/root
+#26 DONE 0.3s
+
+#27 [runner  8/14] COPY --chmod=755 dockerfiles/healthcheck.sh /usr/local/bin/healthcheck.sh
+#27 DONE 0.3s
+
+#28 [runner  9/14] RUN touch /app/log/app.log     && touch /app/log/execution_queue.log     && touch /app/log/app_front.log     && touch /app/log/app.php_errors.log     && touch /app/log/stderr.log     && touch /app/log/stdout.log     && touch /app/log/db_is_locked.log     && touch /app/log/IP_changes.log     && touch /app/log/report_output.txt     && touch /app/log/report_output.html     && touch /app/log/report_output.json     && touch /app/api/user_notifications.json
+#28 DONE 0.6s
+
+#29 [runner 10/14] COPY dockerfiles /app/dockerfiles
+#29 DONE 0.3s
+
+#30 [runner 11/14] RUN chmod +x /app/dockerfiles/*.sh
+#30 DONE 0.8s
+
+#31 [runner 12/14] RUN /app/dockerfiles/init-nginx.sh     && /app/dockerfiles/init-php-fpm.sh     && /app/dockerfiles/init-crond.sh     && /app/dockerfiles/init-backend.sh
+#31 0.417 Initializing nginx...
+#31 0.417 Setting webserver to address (0.0.0.0) and port (20211)
+#31 0.418 /app/dockerfiles/init-nginx.sh: line 5: /app/install/netalertx.template.conf: No such file or directory
+#31 0.611 nginx initialized.
+#31 0.612 Initializing php-fpm...
+#31 0.654 php-fpm initialized.
+#31 0.655 Initializing crond...
+#31 0.689 crond initialized.
+#31 0.690 Initializing backend...
+#31 12.19 Backend initialized.
+#31 DONE 12.3s
+
+#32 [runner 13/14] RUN rm -rf /app/dockerfiles
+#32 DONE 0.6s
+
+#33 [runner 14/14] RUN date +%s > /app/front/buildtimestamp.txt
+#33 DONE 0.6s
+
+#34 exporting to image
+#34 exporting layers
+#34 exporting layers 2.4s done
+#34 writing image sha256:0afcbc41473de559eff0dd93250595494fe4d8ea620861e9e90d50a248fcefda 0.0s done
+#34 naming to docker.io/library/netalertx 0.0s done
+#34 DONE 2.5s

dockerfiles/LICENSE

@@ -1,674 +0,0 @@
-                    GNU GENERAL PUBLIC LICENSE
-                       Version 3, 29 June 2007
-
- Copyright (C) 2007 Free Software Foundation, Inc. <https://fsf.org/>
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-                            Preamble
-
-  The GNU General Public License is a free, copyleft license for
-software and other kinds of works.
-
-  The licenses for most software and other practical works are designed
-to take away your freedom to share and change the works.  By contrast,
-the GNU General Public License is intended to guarantee your freedom to
-share and change all versions of a program--to make sure it remains free
-software for all its users.  We, the Free Software Foundation, use the
-GNU General Public License for most of our software; it applies also to
-any other work released this way by its authors.  You can apply it to
-your programs, too.
-
-  When we speak of free software, we are referring to freedom, not
-price.  Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-them if you wish), that you receive source code or can get it if you
-want it, that you can change the software or use pieces of it in new
-free programs, and that you know you can do these things.
-
-  To protect your rights, we need to prevent others from denying you
-these rights or asking you to surrender the rights.  Therefore, you have
-certain responsibilities if you distribute copies of the software, or if
-you modify it: responsibilities to respect the freedom of others.
-
-  For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must pass on to the recipients the same
-freedoms that you received.  You must make sure that they, too, receive
-or can get the source code.  And you must show them these terms so they
-know their rights.
-
-  Developers that use the GNU GPL protect your rights with two steps:
-(1) assert copyright on the software, and (2) offer you this License
-giving you legal permission to copy, distribute and/or modify it.
-
-  For the developers' and authors' protection, the GPL clearly explains
-that there is no warranty for this free software.  For both users' and
-authors' sake, the GPL requires that modified versions be marked as
-changed, so that their problems will not be attributed erroneously to
-authors of previous versions.
-
-  Some devices are designed to deny users access to install or run
-modified versions of the software inside them, although the manufacturer
-can do so.  This is fundamentally incompatible with the aim of
-protecting users' freedom to change the software.  The systematic
-pattern of such abuse occurs in the area of products for individuals to
-use, which is precisely where it is most unacceptable.  Therefore, we
-have designed this version of the GPL to prohibit the practice for those
-products.  If such problems arise substantially in other domains, we
-stand ready to extend this provision to those domains in future versions
-of the GPL, as needed to protect the freedom of users.
-
-  Finally, every program is threatened constantly by software patents.
-States should not allow patents to restrict development and use of
-software on general-purpose computers, but in those that do, we wish to
-avoid the special danger that patents applied to a free program could
-make it effectively proprietary.  To prevent this, the GPL assures that
-patents cannot be used to render the program non-free.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.
-
-                       TERMS AND CONDITIONS
-
-  0. Definitions.
-
-  "This License" refers to version 3 of the GNU General Public License.
-
-  "Copyright" also means copyright-like laws that apply to other kinds of
-works, such as semiconductor masks.
-
-  "The Program" refers to any copyrightable work licensed under this
-License.  Each licensee is addressed as "you".  "Licensees" and
-"recipients" may be individuals or organizations.
-
-  To "modify" a work means to copy from or adapt all or part of the work
-in a fashion requiring copyright permission, other than the making of an
-exact copy.  The resulting work is called a "modified version" of the
-earlier work or a work "based on" the earlier work.
-
-  A "covered work" means either the unmodified Program or a work based
-on the Program.
-
-  To "propagate" a work means to do anything with it that, without
-permission, would make you directly or secondarily liable for
-infringement under applicable copyright law, except executing it on a
-computer or modifying a private copy.  Propagation includes copying,
-distribution (with or without modification), making available to the
-public, and in some countries other activities as well.
-
-  To "convey" a work means any kind of propagation that enables other
-parties to make or receive copies.  Mere interaction with a user through
-a computer network, with no transfer of a copy, is not conveying.
-
-  An interactive user interface displays "Appropriate Legal Notices"
-to the extent that it includes a convenient and prominently visible
-feature that (1) displays an appropriate copyright notice, and (2)
-tells the user that there is no warranty for the work (except to the
-extent that warranties are provided), that licensees may convey the
-work under this License, and how to view a copy of this License.  If
-the interface presents a list of user commands or options, such as a
-menu, a prominent item in the list meets this criterion.
-
-  1. Source Code.
-
-  The "source code" for a work means the preferred form of the work
-for making modifications to it.  "Object code" means any non-source
-form of a work.
-
-  A "Standard Interface" means an interface that either is an official
-standard defined by a recognized standards body, or, in the case of
-interfaces specified for a particular programming language, one that
-is widely used among developers working in that language.
-
-  The "System Libraries" of an executable work include anything, other
-than the work as a whole, that (a) is included in the normal form of
-packaging a Major Component, but which is not part of that Major
-Component, and (b) serves only to enable use of the work with that
-Major Component, or to implement a Standard Interface for which an
-implementation is available to the public in source code form.  A
-"Major Component", in this context, means a major essential component
-(kernel, window system, and so on) of the specific operating system
-(if any) on which the executable work runs, or a compiler used to
-produce the work, or an object code interpreter used to run it.
-
-  The "Corresponding Source" for a work in object code form means all
-the source code needed to generate, install, and (for an executable
-work) run the object code and to modify the work, including scripts to
-control those activities.  However, it does not include the work's
-System Libraries, or general-purpose tools or generally available free
-programs which are used unmodified in performing those activities but
-which are not part of the work.  For example, Corresponding Source
-includes interface definition files associated with source files for
-the work, and the source code for shared libraries and dynamically
-linked subprograms that the work is specifically designed to require,
-such as by intimate data communication or control flow between those
-subprograms and other parts of the work.
-
-  The Corresponding Source need not include anything that users
-can regenerate automatically from other parts of the Corresponding
-Source.
-
-  The Corresponding Source for a work in source code form is that
-same work.
-
-  2. Basic Permissions.
-
-  All rights granted under this License are granted for the term of
-copyright on the Program, and are irrevocable provided the stated
-conditions are met.  This License explicitly affirms your unlimited
-permission to run the unmodified Program.  The output from running a
-covered work is covered by this License only if the output, given its
-content, constitutes a covered work.  This License acknowledges your
-rights of fair use or other equivalent, as provided by copyright law.
-
-  You may make, run and propagate covered works that you do not
-convey, without conditions so long as your license otherwise remains
-in force.  You may convey covered works to others for the sole purpose
-of having them make modifications exclusively for you, or provide you
-with facilities for running those works, provided that you comply with
-the terms of this License in conveying all material for which you do
-not control copyright.  Those thus making or running the covered works
-for you must do so exclusively on your behalf, under your direction
-and control, on terms that prohibit them from making any copies of
-your copyrighted material outside their relationship with you.
-
-  Conveying under any other circumstances is permitted solely under
-the conditions stated below.  Sublicensing is not allowed; section 10
-makes it unnecessary.
-
-  3. Protecting Users' Legal Rights From Anti-Circumvention Law.
-
-  No covered work shall be deemed part of an effective technological
-measure under any applicable law fulfilling obligations under article
-11 of the WIPO copyright treaty adopted on 20 December 1996, or
-similar laws prohibiting or restricting circumvention of such
-measures.
-
-  When you convey a covered work, you waive any legal power to forbid
-circumvention of technological measures to the extent such circumvention
-is effected by exercising rights under this License with respect to
-the covered work, and you disclaim any intention to limit operation or
-modification of the work as a means of enforcing, against the work's
-users, your or third parties' legal rights to forbid circumvention of
-technological measures.
-
-  4. Conveying Verbatim Copies.
-
-  You may convey verbatim copies of the Program's source code as you
-receive it, in any medium, provided that you conspicuously and
-appropriately publish on each copy an appropriate copyright notice;
-keep intact all notices stating that this License and any
-non-permissive terms added in accord with section 7 apply to the code;
-keep intact all notices of the absence of any warranty; and give all
-recipients a copy of this License along with the Program.
-
-  You may charge any price or no price for each copy that you convey,
-and you may offer support or warranty protection for a fee.
-
-  5. Conveying Modified Source Versions.
-
-  You may convey a work based on the Program, or the modifications to
-produce it from the Program, in the form of source code under the
-terms of section 4, provided that you also meet all of these conditions:
-
-    a) The work must carry prominent notices stating that you modified
-    it, and giving a relevant date.
-
-    b) The work must carry prominent notices stating that it is
-    released under this License and any conditions added under section
-    7.  This requirement modifies the requirement in section 4 to
-    "keep intact all notices".
-
-    c) You must license the entire work, as a whole, under this
-    License to anyone who comes into possession of a copy.  This
-    License will therefore apply, along with any applicable section 7
-    additional terms, to the whole of the work, and all its parts,
-    regardless of how they are packaged.  This License gives no
-    permission to license the work in any other way, but it does not
-    invalidate such permission if you have separately received it.
-
-    d) If the work has interactive user interfaces, each must display
-    Appropriate Legal Notices; however, if the Program has interactive
-    interfaces that do not display Appropriate Legal Notices, your
-    work need not make them do so.
-
-  A compilation of a covered work with other separate and independent
-works, which are not by their nature extensions of the covered work,
-and which are not combined with it such as to form a larger program,
-in or on a volume of a storage or distribution medium, is called an
-"aggregate" if the compilation and its resulting copyright are not
-used to limit the access or legal rights of the compilation's users
-beyond what the individual works permit.  Inclusion of a covered work
-in an aggregate does not cause this License to apply to the other
-parts of the aggregate.
-
-  6. Conveying Non-Source Forms.
-
-  You may convey a covered work in object code form under the terms
-of sections 4 and 5, provided that you also convey the
-machine-readable Corresponding Source under the terms of this License,
-in one of these ways:
-
-    a) Convey the object code in, or embodied in, a physical product
-    (including a physical distribution medium), accompanied by the
-    Corresponding Source fixed on a durable physical medium
-    customarily used for software interchange.
-
-    b) Convey the object code in, or embodied in, a physical product
-    (including a physical distribution medium), accompanied by a
-    written offer, valid for at least three years and valid for as
-    long as you offer spare parts or customer support for that product
-    model, to give anyone who possesses the object code either (1) a
-    copy of the Corresponding Source for all the software in the
-    product that is covered by this License, on a durable physical
-    medium customarily used for software interchange, for a price no
-    more than your reasonable cost of physically performing this
-    conveying of source, or (2) access to copy the
-    Corresponding Source from a network server at no charge.
-
-    c) Convey individual copies of the object code with a copy of the
-    written offer to provide the Corresponding Source.  This
-    alternative is allowed only occasionally and noncommercially, and
-    only if you received the object code with such an offer, in accord
-    with subsection 6b.
-
-    d) Convey the object code by offering access from a designated
-    place (gratis or for a charge), and offer equivalent access to the
-    Corresponding Source in the same way through the same place at no
-    further charge.  You need not require recipients to copy the
-    Corresponding Source along with the object code.  If the place to
-    copy the object code is a network server, the Corresponding Source
-    may be on a different server (operated by you or a third party)
-    that supports equivalent copying facilities, provided you maintain
-    clear directions next to the object code saying where to find the
-    Corresponding Source.  Regardless of what server hosts the
-    Corresponding Source, you remain obligated to ensure that it is
-    available for as long as needed to satisfy these requirements.
-
-    e) Convey the object code using peer-to-peer transmission, provided
-    you inform other peers where the object code and Corresponding
-    Source of the work are being offered to the general public at no
-    charge under subsection 6d.
-
-  A separable portion of the object code, whose source code is excluded
-from the Corresponding Source as a System Library, need not be
-included in conveying the object code work.
-
-  A "User Product" is either (1) a "consumer product", which means any
-tangible personal property which is normally used for personal, family,
-or household purposes, or (2) anything designed or sold for incorporation
-into a dwelling.  In determining whether a product is a consumer product,
-doubtful cases shall be resolved in favor of coverage.  For a particular
-product received by a particular user, "normally used" refers to a
-typical or common use of that class of product, regardless of the status
-of the particular user or of the way in which the particular user
-actually uses, or expects or is expected to use, the product.  A product
-is a consumer product regardless of whether the product has substantial
-commercial, industrial or non-consumer uses, unless such uses represent
-the only significant mode of use of the product.
-
-  "Installation Information" for a User Product means any methods,
-procedures, authorization keys, or other information required to install
-and execute modified versions of a covered work in that User Product from
-a modified version of its Corresponding Source.  The information must
-suffice to ensure that the continued functioning of the modified object
-code is in no case prevented or interfered with solely because
-modification has been made.
-
-  If you convey an object code work under this section in, or with, or
-specifically for use in, a User Product, and the conveying occurs as
-part of a transaction in which the right of possession and use of the
-User Product is transferred to the recipient in perpetuity or for a
-fixed term (regardless of how the transaction is characterized), the
-Corresponding Source conveyed under this section must be accompanied
-by the Installation Information.  But this requirement does not apply
-if neither you nor any third party retains the ability to install
-modified object code on the User Product (for example, the work has
-been installed in ROM).
-
-  The requirement to provide Installation Information does not include a
-requirement to continue to provide support service, warranty, or updates
-for a work that has been modified or installed by the recipient, or for
-the User Product in which it has been modified or installed.  Access to a
-network may be denied when the modification itself materially and
-adversely affects the operation of the network or violates the rules and
-protocols for communication across the network.
-
-  Corresponding Source conveyed, and Installation Information provided,
-in accord with this section must be in a format that is publicly
-documented (and with an implementation available to the public in
-source code form), and must require no special password or key for
-unpacking, reading or copying.
-
-  7. Additional Terms.
-
-  "Additional permissions" are terms that supplement the terms of this
-License by making exceptions from one or more of its conditions.
-Additional permissions that are applicable to the entire Program shall
-be treated as though they were included in this License, to the extent
-that they are valid under applicable law.  If additional permissions
-apply only to part of the Program, that part may be used separately
-under those permissions, but the entire Program remains governed by
-this License without regard to the additional permissions.
-
-  When you convey a copy of a covered work, you may at your option
-remove any additional permissions from that copy, or from any part of
-it.  (Additional permissions may be written to require their own
-removal in certain cases when you modify the work.)  You may place
-additional permissions on material, added by you to a covered work,
-for which you have or can give appropriate copyright permission.
-
-  Notwithstanding any other provision of this License, for material you
-add to a covered work, you may (if authorized by the copyright holders of
-that material) supplement the terms of this License with terms:
-
-    a) Disclaiming warranty or limiting liability differently from the
-    terms of sections 15 and 16 of this License; or
-
-    b) Requiring preservation of specified reasonable legal notices or
-    author attributions in that material or in the Appropriate Legal
-    Notices displayed by works containing it; or
-
-    c) Prohibiting misrepresentation of the origin of that material, or
-    requiring that modified versions of such material be marked in
-    reasonable ways as different from the original version; or
-
-    d) Limiting the use for publicity purposes of names of licensors or
-    authors of the material; or
-
-    e) Declining to grant rights under trademark law for use of some
-    trade names, trademarks, or service marks; or
-
-    f) Requiring indemnification of licensors and authors of that
-    material by anyone who conveys the material (or modified versions of
-    it) with contractual assumptions of liability to the recipient, for
-    any liability that these contractual assumptions directly impose on
-    those licensors and authors.
-
-  All other non-permissive additional terms are considered "further
-restrictions" within the meaning of section 10.  If the Program as you
-received it, or any part of it, contains a notice stating that it is
-governed by this License along with a term that is a further
-restriction, you may remove that term.  If a license document contains
-a further restriction but permits relicensing or conveying under this
-License, you may add to a covered work material governed by the terms
-of that license document, provided that the further restriction does
-not survive such relicensing or conveying.
-
-  If you add terms to a covered work in accord with this section, you
-must place, in the relevant source files, a statement of the
-additional terms that apply to those files, or a notice indicating
-where to find the applicable terms.
-
-  Additional terms, permissive or non-permissive, may be stated in the
-form of a separately written license, or stated as exceptions;
-the above requirements apply either way.
-
-  8. Termination.
-
-  You may not propagate or modify a covered work except as expressly
-provided under this License.  Any attempt otherwise to propagate or
-modify it is void, and will automatically terminate your rights under
-this License (including any patent licenses granted under the third
-paragraph of section 11).
-
-  However, if you cease all violation of this License, then your
-license from a particular copyright holder is reinstated (a)
-provisionally, unless and until the copyright holder explicitly and
-finally terminates your license, and (b) permanently, if the copyright
-holder fails to notify you of the violation by some reasonable means
-prior to 60 days after the cessation.
-
-  Moreover, your license from a particular copyright holder is
-reinstated permanently if the copyright holder notifies you of the
-violation by some reasonable means, this is the first time you have
-received notice of violation of this License (for any work) from that
-copyright holder, and you cure the violation prior to 30 days after
-your receipt of the notice.
-
-  Termination of your rights under this section does not terminate the
-licenses of parties who have received copies or rights from you under
-this License.  If your rights have been terminated and not permanently
-reinstated, you do not qualify to receive new licenses for the same
-material under section 10.
-
-  9. Acceptance Not Required for Having Copies.
-
-  You are not required to accept this License in order to receive or
-run a copy of the Program.  Ancillary propagation of a covered work
-occurring solely as a consequence of using peer-to-peer transmission
-to receive a copy likewise does not require acceptance.  However,
-nothing other than this License grants you permission to propagate or
-modify any covered work.  These actions infringe copyright if you do
-not accept this License.  Therefore, by modifying or propagating a
-covered work, you indicate your acceptance of this License to do so.
-
-  10. Automatic Licensing of Downstream Recipients.
-
-  Each time you convey a covered work, the recipient automatically
-receives a license from the original licensors, to run, modify and
-propagate that work, subject to this License.  You are not responsible
-for enforcing compliance by third parties with this License.
-
-  An "entity transaction" is a transaction transferring control of an
-organization, or substantially all assets of one, or subdividing an
-organization, or merging organizations.  If propagation of a covered
-work results from an entity transaction, each party to that
-transaction who receives a copy of the work also receives whatever
-licenses to the work the party's predecessor in interest had or could
-give under the previous paragraph, plus a right to possession of the
-Corresponding Source of the work from the predecessor in interest, if
-the predecessor has it or can get it with reasonable efforts.
-
-  You may not impose any further restrictions on the exercise of the
-rights granted or affirmed under this License.  For example, you may
-not impose a license fee, royalty, or other charge for exercise of
-rights granted under this License, and you may not initiate litigation
-(including a cross-claim or counterclaim in a lawsuit) alleging that
-any patent claim is infringed by making, using, selling, offering for
-sale, or importing the Program or any portion of it.
-
-  11. Patents.
-
-  A "contributor" is a copyright holder who authorizes use under this
-License of the Program or a work on which the Program is based.  The
-work thus licensed is called the contributor's "contributor version".
-
-  A contributor's "essential patent claims" are all patent claims
-owned or controlled by the contributor, whether already acquired or
-hereafter acquired, that would be infringed by some manner, permitted
-by this License, of making, using, or selling its contributor version,
-but do not include claims that would be infringed only as a
-consequence of further modification of the contributor version.  For
-purposes of this definition, "control" includes the right to grant
-patent sublicenses in a manner consistent with the requirements of
-this License.
-
-  Each contributor grants you a non-exclusive, worldwide, royalty-free
-patent license under the contributor's essential patent claims, to
-make, use, sell, offer for sale, import and otherwise run, modify and
-propagate the contents of its contributor version.
-
-  In the following three paragraphs, a "patent license" is any express
-agreement or commitment, however denominated, not to enforce a patent
-(such as an express permission to practice a patent or covenant not to
-sue for patent infringement).  To "grant" such a patent license to a
-party means to make such an agreement or commitment not to enforce a
-patent against the party.
-
-  If you convey a covered work, knowingly relying on a patent license,
-and the Corresponding Source of the work is not available for anyone
-to copy, free of charge and under the terms of this License, through a
-publicly available network server or other readily accessible means,
-then you must either (1) cause the Corresponding Source to be so
-available, or (2) arrange to deprive yourself of the benefit of the
-patent license for this particular work, or (3) arrange, in a manner
-consistent with the requirements of this License, to extend the patent
-license to downstream recipients.  "Knowingly relying" means you have
-actual knowledge that, but for the patent license, your conveying the
-covered work in a country, or your recipient's use of the covered work
-in a country, would infringe one or more identifiable patents in that
-country that you have reason to believe are valid.
-
-  If, pursuant to or in connection with a single transaction or
-arrangement, you convey, or propagate by procuring conveyance of, a
-covered work, and grant a patent license to some of the parties
-receiving the covered work authorizing them to use, propagate, modify
-or convey a specific copy of the covered work, then the patent license
-you grant is automatically extended to all recipients of the covered
-work and works based on it.
-
-  A patent license is "discriminatory" if it does not include within
-the scope of its coverage, prohibits the exercise of, or is
-conditioned on the non-exercise of one or more of the rights that are
-specifically granted under this License.  You may not convey a covered
-work if you are a party to an arrangement with a third party that is
-in the business of distributing software, under which you make payment
-to the third party based on the extent of your activity of conveying
-the work, and under which the third party grants, to any of the
-parties who would receive the covered work from you, a discriminatory
-patent license (a) in connection with copies of the covered work
-conveyed by you (or copies made from those copies), or (b) primarily
-for and in connection with specific products or compilations that
-contain the covered work, unless you entered into that arrangement,
-or that patent license was granted, prior to 28 March 2007.
-
-  Nothing in this License shall be construed as excluding or limiting
-any implied license or other defenses to infringement that may
-otherwise be available to you under applicable patent law.
-
-  12. No Surrender of Others' Freedom.
-
-  If conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot convey a
-covered work so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you may
-not convey it at all.  For example, if you agree to terms that obligate you
-to collect a royalty for further conveying from those to whom you convey
-the Program, the only way you could satisfy both those terms and this
-License would be to refrain entirely from conveying the Program.
-
-  13. Use with the GNU Affero General Public License.
-
-  Notwithstanding any other provision of this License, you have
-permission to link or combine any covered work with a work licensed
-under version 3 of the GNU Affero General Public License into a single
-combined work, and to convey the resulting work.  The terms of this
-License will continue to apply to the part which is the covered work,
-but the special requirements of the GNU Affero General Public License,
-section 13, concerning interaction through a network will apply to the
-combination as such.
-
-  14. Revised Versions of this License.
-
-  The Free Software Foundation may publish revised and/or new versions of
-the GNU General Public License from time to time.  Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-  Each version is given a distinguishing version number.  If the
-Program specifies that a certain numbered version of the GNU General
-Public License "or any later version" applies to it, you have the
-option of following the terms and conditions either of that numbered
-version or of any later version published by the Free Software
-Foundation.  If the Program does not specify a version number of the
-GNU General Public License, you may choose any version ever published
-by the Free Software Foundation.
-
-  If the Program specifies that a proxy can decide which future
-versions of the GNU General Public License can be used, that proxy's
-public statement of acceptance of a version permanently authorizes you
-to choose that version for the Program.
-
-  Later license versions may give you additional or different
-permissions.  However, no additional obligations are imposed on any
-author or copyright holder as a result of your choosing to follow a
-later version.
-
-  15. Disclaimer of Warranty.
-
-  THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
-APPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
-HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
-OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
-THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
-IS WITH YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
-ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
-
-  16. Limitation of Liability.
-
-  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
-THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
-GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
-USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
-DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
-PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
-EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
-SUCH DAMAGES.
-
-  17. Interpretation of Sections 15 and 16.
-
-  If the disclaimer of warranty and limitation of liability provided
-above cannot be given local legal effect according to their terms,
-reviewing courts shall apply local law that most closely approximates
-an absolute waiver of all civil liability in connection with the
-Program, unless a warranty or assumption of liability accompanies a
-copy of the Program in return for a fee.
-
-                     END OF TERMS AND CONDITIONS
-
-            How to Apply These Terms to Your New Programs
-
-  If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
-  To do so, attach the following notices to the program.  It is safest
-to attach them to the start of each source file to most effectively
-state the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
-    <one line to give the program's name and a brief idea of what it does.>
-    Copyright (C) <year>  <name of author>
-
-    This program is free software: you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation, either version 3 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program.  If not, see <https://www.gnu.org/licenses/>.
-
-Also add information on how to contact you by electronic and paper mail.
-
-  If the program does terminal interaction, make it output a short
-notice like this when it starts in an interactive mode:
-
-    <program>  Copyright (C) <year>  <name of author>
-    This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
-    This is free software, and you are welcome to redistribute it
-    under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License.  Of course, your program's commands
-might be different; for a GUI interface, you would use an "about box".
-
-  You should also get your employer (if you work as a programmer) or school,
-if any, to sign a "copyright disclaimer" for the program, if necessary.
-For more information on this, and how to apply and follow the GNU GPL, see
-<https://www.gnu.org/licenses/>.
-
-  The GNU General Public License does not permit incorporating your program
-into proprietary programs.  If your program is a subroutine library, you
-may consider it more useful to permit linking proprietary applications with
-the library.  If this is what you want to do, use the GNU Lesser General
-Public License instead of this License.  But first, please read
-<https://www.gnu.org/licenses/why-not-lgpl.html>.

dockerfiles/init.sh

@@ -1,168 +0,0 @@
-#!/usr/bin/with-contenv bash
-
-echo "---------------------------------------------------------
-[INSTALL]                                    Run init.sh
----------------------------------------------------------"
-
-DEFAULT_PUID=102
-DEFAULT_GID=82
-
-PUID=${PUID:-${DEFAULT_PUID}}
-PGID=${PGID:-${DEFAULT_GID}}
-
-echo "[INSTALL] Setting up user UID and GID"
-
-if ! groupmod -o -g "$PGID" www-data && [ "$PGID" != "$DEFAULT_GID" ] ; then
-   echo "Failed to set user GID to ${PGID}, trying with default GID ${DEFAULT_GID}"
-   groupmod -o -g "$DEFAULT_GID" www-data
-fi
-if ! usermod -o -u "$PUID" nginx && [ "$PUID" != "$DEFAULT_PUID" ] ; then
-   echo "Failed to set user UID to ${PUID}, trying with default PUID ${DEFAULT_PUID}"
-   usermod -o -u "$DEFAULT_PUID" nginx
-fi
-
-echo "
----------------------------------------------------------
-GID/UID
----------------------------------------------------------
-User UID:    $(id -u nginx)
-User GID:    $(getent group www-data | cut -d: -f3)
----------------------------------------------------------"
-
-chown nginx:nginx /run/nginx/ /var/log/nginx/ /var/lib/nginx/ /var/lib/nginx/tmp/
-chgrp www-data /var/www/localhost/htdocs/
-
-export INSTALL_DIR=/app  # Specify the installation directory here
-
-# DO NOT CHANGE ANYTHING BELOW THIS LINE!
-
-CONF_FILE="app.conf"
-NGINX_CONF_FILE=netalertx.conf
-DB_FILE="app.db"
-FULL_FILEDB_PATH="${INSTALL_DIR}/db/${DB_FILE}"
-NGINX_CONFIG_FILE="/etc/nginx/http.d/${NGINX_CONF_FILE}"
-OUI_FILE="/usr/share/arp-scan/ieee-oui.txt" # Define the path to ieee-oui.txt and ieee-iab.txt
-
-INSTALL_DIR_OLD=/home/pi/pialert
-OLD_APP_NAME=pialert
-
-# DO NOT CHANGE ANYTHING ABOVE THIS LINE!
-
-# Check if script is run as root
-if [[ $EUID -ne 0 ]]; then
-    echo "This script must be run as root. Please use 'sudo'."
-    exit 1
-fi
-
-echo "[INSTALL] Copy starter ${DB_FILE} and ${CONF_FILE} if they don't exist"
-
-# DANGER ZONE: ALWAYS_FRESH_INSTALL
-if [ "$ALWAYS_FRESH_INSTALL" = true ]; then
-  echo "[INSTALL] ❗ ALERT /db and /config folders are cleared because the ALWAYS_FRESH_INSTALL is set to: $ALWAYS_FRESH_INSTALL❗"
-
-  # Delete content of "$INSTALL_DIR/config/"
-  rm -rf "$INSTALL_DIR/config/"*
-  rm -rf "$INSTALL_DIR_OLD/config/"*
-
-  # Delete content of "$INSTALL_DIR/db/"
-  rm -rf "$INSTALL_DIR/db/"*
-  rm -rf "$INSTALL_DIR_OLD/db/"*
-fi
-
-# OVERRIDE settings: Handling APP_CONF_OVERRIDE
-# Check if APP_CONF_OVERRIDE is set
-
-# remove old
-rm "${INSTALL_DIR}/config/app_conf_override.json"
-
-if [ -z "$APP_CONF_OVERRIDE" ]; then
-  echo "APP_CONF_OVERRIDE is not set. Skipping config file creation."
-else
-  # Save the APP_CONF_OVERRIDE env variable as a JSON file
-  echo "$APP_CONF_OVERRIDE" > "${INSTALL_DIR}/config/app_conf_override.json"
-  echo "Config file saved to ${INSTALL_DIR}/config/app_conf_override.json"
-fi
-
-# 🔻 FOR BACKWARD COMPATIBILITY - REMOVE AFTER 12/12/2025
-
-# Check if pialert.db exists, then create a symbolic link to app.db
-if [ -f "${INSTALL_DIR_OLD}/db/${OLD_APP_NAME}.db" ]; then
-    ln -s "${INSTALL_DIR_OLD}/db/${OLD_APP_NAME}.db" "${FULL_FILEDB_PATH}"
-fi
-
-# Check if ${OLD_APP_NAME}.conf exists, then create a symbolic link to app.conf
-if [ -f "${INSTALL_DIR_OLD}/config/${OLD_APP_NAME}.conf" ]; then
-    ln -s "${INSTALL_DIR_OLD}/config/${OLD_APP_NAME}.conf" "${INSTALL_DIR}/config/${CONF_FILE}"
-fi
-# 🔺 FOR BACKWARD COMPATIBILITY - REMOVE AFTER 12/12/2025
-
-# Copy starter .db and .conf if they don't exist
-cp -na "${INSTALL_DIR}/back/${CONF_FILE}" "${INSTALL_DIR}/config/${CONF_FILE}"
-cp -na "${INSTALL_DIR}/back/${DB_FILE}" "${FULL_FILEDB_PATH}"
-
-# if custom variables not set we do not need to do anything
-if [ -n "${TZ}" ]; then
-  FILECONF="${INSTALL_DIR}/config/${CONF_FILE}"
-  echo "[INSTALL] Setup timezone"
-  sed -i "\#^TIMEZONE=#c\TIMEZONE='${TZ}'" "${FILECONF}"
-
-  # set TimeZone in container
-  cp /usr/share/zoneinfo/$TZ /etc/localtime
-  echo $TZ > /etc/timezone
-fi
-
-# if custom variables not set we do not need to do anything
-if [ -n "${LOADED_PLUGINS}" ]; then
-  FILECONF="${INSTALL_DIR}/config/${CONF_FILE}"
-  echo "[INSTALL] Setup custom LOADED_PLUGINS variable"
-  sed -i "\#^LOADED_PLUGINS=#c\LOADED_PLUGINS=${LOADED_PLUGINS}" "${FILECONF}"
-fi
-
-echo "[INSTALL] Setup NGINX"
-echo "Setting webserver to address ($LISTEN_ADDR) and port ($PORT)"
-envsubst '$INSTALL_DIR $LISTEN_ADDR $PORT' < "${INSTALL_DIR}/install/netalertx.template.conf" > "${NGINX_CONFIG_FILE}"
-
-# Run the hardware vendors update at least once
-echo "[INSTALL] Run the hardware vendors update"
-
-# Check if ieee-oui.txt or ieee-iab.txt exist
-if [ -f "${OUI_FILE}" ]; then
-  echo "The file ieee-oui.txt exists. Skipping update_vendors.sh..."
-else
-  echo "The file ieee-oui.txt does not exist. Running update_vendors..."
-
-  # Run the update_vendors.sh script
-  if [ -f "${INSTALL_DIR}/back/update_vendors.sh" ]; then
-    "${INSTALL_DIR}/back/update_vendors.sh"
-  else
-    echo "update_vendors.sh script not found in ${INSTALL_DIR}."
-  fi
-fi
-
-# Create an empty log files
-# Create the execution_queue.log and app_front.log files if they don't exist
-touch "${INSTALL_DIR}"/log/{app.log,execution_queue.log,app_front.log,app.php_errors.log,stderr.log,stdout.log,db_is_locked.log}
-touch "${INSTALL_DIR}"/api/user_notifications.json
-# Create plugins sub-directory if it doesn't exist in case a custom log folder is used
-mkdir -p "${INSTALL_DIR}"/log/plugins
-
-echo "[INSTALL] Fixing permissions after copied starter config & DB"
-chown -R nginx:www-data "${INSTALL_DIR}"
-
-chmod 750 "${INSTALL_DIR}"/{config,log,db}
-find "${INSTALL_DIR}"/{config,log,db} -type f -exec chmod 640 {} \;
-
-# Check if buildtimestamp.txt doesn't exist
-if [ ! -f "${INSTALL_DIR}/front/buildtimestamp.txt" ]; then
-    # Create buildtimestamp.txt
-    date +%s > "${INSTALL_DIR}/front/buildtimestamp.txt"
-    chown nginx:www-data "${INSTALL_DIR}/front/buildtimestamp.txt"
-fi
-
-echo -e "
-            [ENV] PATH                      is ${PATH}
-            [ENV] PORT                      is ${PORT}
-            [ENV] TZ                        is ${TZ}
-            [ENV] LISTEN_ADDR               is ${LISTEN_ADDR}
-            [ENV] ALWAYS_FRESH_INSTALL      is ${ALWAYS_FRESH_INSTALL}
-        "

dockerfiles/start.sh

@@ -1,49 +0,0 @@
-#!/bin/bash
-
-export INSTALL_DIR=/app
-export APP_NAME=netalertx
-
-# php-fpm setup
-install -d -o nginx -g www-data /run/php/
-sed -i "/^;pid/c\pid = /run/php/php8.3-fpm.pid" /etc/php83/php-fpm.conf
-sed -i "/^listen/c\listen = /run/php/php8.3-fpm.sock" /etc/php83/php-fpm.d/www.conf
-sed -i "/^;listen.owner/c\listen.owner = nginx" /etc/php83/php-fpm.d/www.conf
-sed -i "/^;listen.group/c\listen.group = www-data" /etc/php83/php-fpm.d/www.conf
-sed -i "/^user/c\user = nginx" /etc/php83/php-fpm.d/www.conf
-sed -i "/^group/c\group = www-data" /etc/php83/php-fpm.d/www.conf
-
-# s6 overlay setup
-mkdir -p /etc/s6-overlay/s6-rc.d/{SetupOneshot,crond/dependencies.d,php-fpm/dependencies.d,nginx/dependencies.d,$APP_NAME/dependencies.d}
-echo "oneshot" > /etc/s6-overlay/s6-rc.d/SetupOneshot/type
-echo "longrun" > /etc/s6-overlay/s6-rc.d/crond/type
-echo "longrun" > /etc/s6-overlay/s6-rc.d/php-fpm/type
-echo "longrun" > /etc/s6-overlay/s6-rc.d/nginx/type
-echo "longrun" > /etc/s6-overlay/s6-rc.d/$APP_NAME/type
-echo -e "${INSTALL_DIR}/dockerfiles/init.sh" > /etc/s6-overlay/s6-rc.d/SetupOneshot/up
-echo -e '#!/bin/execlineb -P
-
-        if { echo
-        "
-            [INSTALL] Starting crond service...
-
-        " }' > /etc/s6-overlay/s6-rc.d/crond/run
-echo -e "/usr/sbin/crond -f" >> /etc/s6-overlay/s6-rc.d/crond/run
-echo -e "#!/bin/execlineb -P\n/usr/sbin/php-fpm83 -F" > /etc/s6-overlay/s6-rc.d/php-fpm/run
-echo -e '#!/bin/execlineb -P\nnginx -g "daemon off;"' > /etc/s6-overlay/s6-rc.d/nginx/run
-echo -e '#!/bin/execlineb -P
-        with-contenv
-
-        importas -u PORT PORT
-
-        if { echo
-        "
-            [INSTALL] 🚀 Starting app (:${PORT})
-
-        " }' > /etc/s6-overlay/s6-rc.d/$APP_NAME/run
-echo -e "python ${INSTALL_DIR}/server" >> /etc/s6-overlay/s6-rc.d/$APP_NAME/run
-touch /etc/s6-overlay/s6-rc.d/user/contents.d/{SetupOneshot,crond,php-fpm,nginx,$APP_NAME} /etc/s6-overlay/s6-rc.d/{crond,php-fpm,nginx,$APP_NAME}/dependencies.d/SetupOneshot
-touch /etc/s6-overlay/s6-rc.d/nginx/dependencies.d/php-fpm
-touch /etc/s6-overlay/s6-rc.d/$APP_NAME/dependencies.d/nginx
-
-# this removes the current file
-rm -f $0

docs/API.md

@@ -1,6 +1,6 @@
-# API endpoints
+# NetAlertX API Documentation
 
-NetAlertX comes with a couple of API endpoints. All requests need to be authorized (executed in a logged in browser session) or you have to pass the value of the `API_TOKEN` settings as authorization bearer, for example:
+This API provides programmatic access to **devices, events, sessions, metrics, network tools, and sync** in NetAlertX. It is implemented as a **REST and GraphQL server**. All requests require authentication via **API Token** (`API_TOKEN` setting) unless explicitly noted. For example, to authorize a GraphQL request, you need to use a `Authorization: Bearer API_TOKEN` header as per example below:
 
 ```graphql
 curl 'http://host:GRAPHQL_PORT/graphql' \
@@ -21,239 +21,62 @@ curl 'http://host:GRAPHQL_PORT/graphql' \
   }'
 ```
 
-## API Endpoint: GraphQL
+The API server runs on `0.0.0.0:<graphql_port>` with **CORS enabled** for all main endpoints.
 
-- Endpoint URL: `php/server/query_graphql.php`
-- Host: `same as front end (web ui)`
-- Port: `20212` or as defined by the `GRAPHQL_PORT` setting
+---
 
-### Example Query to Fetch Devices
+## Authentication
 
-First, let's define the GraphQL query to fetch devices with pagination and sorting options.
+All endpoints require an API token provided in the HTTP headers:
 
-```graphql
-query GetDevices($options: PageQueryOptionsInput) {
-  devices(options: $options) {
-    devices {
-      rowid
-      devMac
-      devName
-      devOwner
-      devType
-      devVendor
-      devLastConnection
-      devStatus
-    }
-    count
-  }
-}
+```http
+Authorization: Bearer <API_TOKEN>
 ```
 
-### `curl` Command
-
-You can use the following `curl` command to execute the query. 
-
-```sh
-curl 'http://host:GRAPHQL_PORT/graphql'   -X POST   -H 'Authorization: Bearer API_TOKEN'  -H 'Content-Type: application/json'   --data '{
-    "query": "query GetDevices($options: PageQueryOptionsInput) { devices(options: $options) { devices { rowid devMac devName devOwner devType devVendor devLastConnection devStatus } count } }",
-    "variables": {
-      "options": {
-        "page": 1,
-        "limit": 10,
-        "sort": [{ "field": "devName", "order": "asc" }],
-        "search": "",
-        "status": "connected"
-      }
-    }
-  }'
-```
-
-### Explanation:
-
-1. **GraphQL Query**:
-   - The `query` parameter contains the GraphQL query as a string.
-   - The `variables` parameter contains the input variables for the query.
-
-2. **Query Variables**:
-   - `page`: Specifies the page number of results to fetch.
-   - `limit`: Specifies the number of results per page.
-   - `sort`: Specifies the sorting options, with `field` being the field to sort by and `order` being the sort order (`asc` for ascending or `desc` for descending).
-   - `search`: A search term to filter the devices.
-   - `status`: The status filter to apply (valid values are `my_devices` (determined by the `UI_MY_DEVICES` setting), `connected`, `favorites`, `new`, `down`, `archived`, `offline`).
-
-3. **`curl` Command**:
-   - The `-X POST` option specifies that we are making a POST request.
-   - The `-H "Content-Type: application/json"` option sets the content type of the request to JSON.
-   - The `-d` option provides the request payload, which includes the GraphQL query and variables.
-
-### Sample Response
-
-The response will be in JSON format, similar to the following:
+If the token is missing or invalid, the server will return:
 
 ```json
-{
-  "data": {
-    "devices": {
-      "devices": [
-        {
-          "rowid": 1,
-          "devMac": "00:11:22:33:44:55",
-          "devName": "Device 1",
-          "devOwner": "Owner 1",
-          "devType": "Type 1",
-          "devVendor": "Vendor 1",
-          "devLastConnection": "2025-01-01T00:00:00Z",
-          "devStatus": "connected"
-        },
-        {
-          "rowid": 2,
-          "devMac": "66:77:88:99:AA:BB",
-          "devName": "Device 2",
-          "devOwner": "Owner 2",
-          "devType": "Type 2",
-          "devVendor": "Vendor 2",
-          "devLastConnection": "2025-01-02T00:00:00Z",
-          "devStatus": "connected"
-        }
-      ],
-      "count": 2
-    }
-  }
-}
+{ "error": "Forbidden" }
 ```
 
-## API Endpoint: JSON files 
+---
 
-This API endpoint retrieves static files, that are periodically updated. 
-
-- Endpoint URL: `php/server/query_json.php?file=<file name>`
-- Host: `same as front end (web ui)`
-- Port: `20211` or as defined by the $PORT docker environment variable (same as the port for the web ui)
-
-### When are the endpoints updated
-
-The endpoints are updated when objects in the API endpoints are changed.
-
-### Location of the endpoints
-
-In the container, these files are located under the `/app/api/` folder. You can access them via the `/php/server/query_json.php?file=user_notifications.json` endpoint.
-
-### Available endpoints
-
-You can access the following files:
-
-  | File name | Description | 
-  |----------------------|----------------------| 
-  | `notification_json_final.json` | The json version of the last notification (e.g. used for webhooks - [sample JSON](https://github.com/jokob-sk/NetAlertX/blob/main/front/report_templates/webhook_json_sample.json)). |
-  | `table_devices.json` | All of the available Devices detected by the app. |  
-  | `table_plugins_events.json` | The list of the unprocessed (pending) notification events (plugins_events DB table). |
-  | `table_plugins_history.json` | The list of notification events history. |  
-  | `table_plugins_objects.json` | The content of the plugins_objects table. Find more info on the [Plugin system here](https://github.com/jokob-sk/NetAlertX/tree/main/docs/PLUGINS.md)|
-  | `language_strings.json` | The content of the language_strings table, which in turn is loaded from the plugins `config.json` definitions. |  
-  | `table_custom_endpoint.json` | A custom endpoint generated by the SQL query specified by the `API_CUSTOM_SQL` setting. |
-  | `table_settings.json` | The content of the settings table. |
-  | `app_state.json` | Contains the current application state. |
-  
-
-### JSON Data format
-
-The endpoints starting with the `table_` prefix contain most, if not all, data contained in the corresponding database table. The common format for those is:
-
-```JSON
-{
-  "data": [
-        {
-          "db_column_name": "data",
-          "db_column_name2": "data2"      
-        }, 
-        {
-          "db_column_name": "data3",
-          "db_column_name2": "data4" 
-        }
-    ]
-}
+## Base URL
 
 ```
-
-Example JSON of the `table_devices.json` endpoint with two Devices (database rows):
-
-```JSON
-{
-  "data": [
-        {
-          "devMac": "Internet",
-          "devName": "Net - Huawei",
-          "devType": "Router",
-          "devVendor": null,
-          "devGroup": "Always on",
-          "devFirstConnection": "2021-01-01 00:00:00",
-          "devLastConnection": "2021-01-28 22:22:11",
-          "devLastIP": "192.168.1.24",
-          "devStaticIP": 0,
-          "devPresentLastScan": 1,
-          "devLastNotification": "2023-01-28 22:22:28.998715",
-          "devIsNew": 0,
-          "devParentMAC": "",
-          "devParentPort": "",
-          "devIcon": "globe"
-        }, 
-        {
-          "devMac": "a4:8f:ff:aa:ba:1f",
-          "devName": "Net - USG",
-          "devType": "Firewall",
-          "devVendor": "Ubiquiti Inc",
-          "devGroup": "",
-          "devFirstConnection": "2021-02-12 22:05:00",
-          "devLastConnection": "2021-07-17 15:40:00",
-          "devLastIP": "192.168.1.1",
-          "devStaticIP": 1,
-          "devPresentLastScan": 1,
-          "devLastNotification": "2021-07-17 15:40:10.667717",
-          "devIsNew": 0,
-          "devParentMAC": "Internet",
-          "devParentPort": 1,
-          "devIcon": "shield-halved"
-      }
-    ]
-}
-
+http://<server>:<GRAPHQL_PORT>/
 ```
 
-## API Endpoint: /log files
+---
 
-This API endpoint retrieves files from the `/app/log` folder. 
+## Endpoints
 
-- Endpoint URL: `php/server/query_logs.php?file=<file name>`
-- Host: `same as front end (web ui)`
-- Port: `20211` or as defined by the $PORT docker environment variable (same as the port for the web ui)
+> [!TIP]
+> When retrieving devices or settings try using the GraphQL API endpoint first as it is read-optimized.
 
-| File                     | Description                                                   |
-|--------------------------|---------------------------------------------------------------|
-| `IP_changes.log`         | Logs of IP address changes                                    |
-| `app.log`                | Main application log                                          |
-| `app.php_errors.log`     | PHP error log                                                 |
-| `app_front.log`          | Frontend application log                                      |
-| `app_nmap.log`           | Logs of Nmap scan results                                     |
-| `db_is_locked.log`       | Logs when the database is locked                              |
-| `execution_queue.log`    | Logs of execution queue activities                            |
-| `plugins/`               | Directory for temporary plugin-related files (not accessible) |
-| `report_output.html`     | HTML report output                                            |
-| `report_output.json`     | JSON format report output                                     |
-| `report_output.txt`      | Text format report output                                     |
-| `stderr.log`             | Logs of standard error output                                 |
-| `stdout.log`             | Logs of standard output                                       |
+* [Device API Endpoints](API_DEVICE.md) – Manage individual devices
+* [Devices Collection](API_DEVICES.md) – Bulk operations on multiple devices
+* [Events](API_EVENTS.md) – Device event logging and management
+* [Sessions](API_SESSIONS.md) – Connection sessions and history
+* [Settings](API_SETTINGS.md) – Settings
+* Messaging:
+    * [In app messaging](API_MESSAGING_IN_APP.md) - In-app messaging
+* [Metrics](API_METRICS.md) – Prometheus metrics and per-device status
+* [Network Tools](API_NETTOOLS.md) – Utilities like Wake-on-LAN, traceroute, nslookup, nmap, and internet info
+* [Online History](API_ONLINEHISTORY.md) – Online/offline device records
+* [GraphQL](API_GRAPHQL.md) – Advanced queries and filtering for Devices, Settings and Language Strings
+* [Sync](API_SYNC.md) – Synchronization between multiple NetAlertX instances
+* [Logs](API_LOGS.md) – Purging of logs and adding to the event execution queue for user triggered events
+* [DB query](API_DBQUERY.md) (⚠ Internal) - Low level database access - use other endpoints if possible
 
+See [Testing](API_TESTS.md) for example requests and usage.
 
-## API Endpoint: /config files
+---
 
-To retrieve files from the `/app/config` folder. 
-
-- Endpoint URL: `php/server/query_config.php?file=<file name>`
-- Host: `same as front end (web ui)`
-- Port: `20211` or as defined by the $PORT docker environment variable (same as the port for the web ui)
-
-| File                     | Description                                      |
-|--------------------------|--------------------------------------------------|
-| `devices.csv`            | Devices csv file                                 |
-| `app.conf`               | Application config file                          |
+## Notes
 
+* All endpoints enforce **Bearer token authentication**.
+* Errors return JSON with `success: False` and an error message.
+* GraphQL is available for advanced queries, while REST endpoints cover structured use cases.
+* Endpoints run on `0.0.0.0:<GRAPHQL_PORT>` with **CORS enabled**.
+* Use consistent API tokens and node/plugin names when interacting with `/sync` to ensure data integrity.

docs/API_DBQUERY.md

@@ -0,0 +1,183 @@
+# Database Query API
+
+The **Database Query API** provides direct, low-level access to the NetAlertX database. It allows **read, write, update, and delete** operations against tables, using **base64-encoded** SQL or structured parameters.
+
+> [!Warning] 
+> This API is primarily used internally to generate and render the application UI. These endpoints are low-level and powerful, and should be used with caution. Wherever possible, prefer the [standard API endpoints](API.md). Invalid or unsafe queries can corrupt data.
+> If you need data in a specific format that is not already provided, please open an issue or pull request with a clear, broadly useful use case. This helps ensure new endpoints benefit the wider community rather than relying on raw database queries.
+
+---
+
+## Authentication
+
+All `/dbquery/*` endpoints require an API token in the HTTP headers:
+
+```http
+Authorization: Bearer <API_TOKEN>
+```
+
+If the token is missing or invalid:
+
+```json
+{ "error": "Forbidden" }
+```
+
+---
+
+## Endpoints
+
+### 1. `POST /dbquery/read`
+
+Execute a **read-only** SQL query (e.g., `SELECT`).
+
+#### Request Body
+
+```json
+{
+  "rawSql": "U0VMRUNUICogRlJPTSBERVZJQ0VT"   // base64 encoded SQL
+}
+```
+
+Decoded SQL:
+
+```sql
+SELECT * FROM Devices;
+```
+
+#### Response
+
+```json
+{
+  "success": true,
+  "results": [
+    { "devMac": "AA:BB:CC:DD:EE:FF", "devName": "Phone" }
+  ]
+}
+```
+
+#### `curl` Example
+
+```bash
+curl -X POST "http://<server_ip>:<GRAPHQL_PORT>/dbquery/read" \
+  -H "Authorization: Bearer <API_TOKEN>" \
+  -H "Accept: application/json" \
+  -H "Content-Type: application/json" \
+  -d '{
+    "rawSql": "U0VMRUNUICogRlJPTSBERVZJQ0VT"
+  }'
+```
+
+---
+
+### 2. `POST /dbquery/update` (safer than `/dbquery/write`)
+
+Update rows in a table by `columnName` + `id`. `/dbquery/update` is parameterized to reduce the risk of SQL injection, while `/dbquery/write` executes raw SQL directly.
+
+#### Request Body
+
+```json
+{
+  "columnName": "devMac",
+  "id": ["AA:BB:CC:DD:EE:FF"],
+  "dbtable": "Devices",
+  "columns": ["devName", "devOwner"],
+  "values": ["Laptop", "Alice"]
+}
+```
+
+#### Response
+
+```json
+{ "success": true, "updated_count": 1 }
+```
+
+#### `curl` Example
+
+```bash
+curl -X POST "http://<server_ip>:<GRAPHQL_PORT>/dbquery/update" \
+  -H "Authorization: Bearer <API_TOKEN>" \
+  -H "Accept: application/json" \
+  -H "Content-Type: application/json" \
+  -d '{
+    "columnName": "devMac",
+    "id": ["AA:BB:CC:DD:EE:FF"],
+    "dbtable": "Devices",
+    "columns": ["devName", "devOwner"],
+    "values": ["Laptop", "Alice"]
+  }'
+```
+
+---
+
+### 3. `POST /dbquery/write`
+
+Execute a **write query** (`INSERT`, `UPDATE`, `DELETE`).
+
+#### Request Body
+
+```json
+{
+  "rawSql": "SU5TRVJUIElOVE8gRGV2aWNlcyAoZGV2TWFjLCBkZXYgTmFtZSwgZGV2Rmlyc3RDb25uZWN0aW9uLCBkZXZMYXN0Q29ubmVjdGlvbiwgZGV2TGFzdElQKSBWQUxVRVMgKCc2QTpCQjo0Qzo1RDo2RTonLCAnVGVzdERldmljZScsICcyMDI1LTA4LTMwIDEyOjAwOjAwJywgJzIwMjUtMDgtMzAgMTI6MDA6MDAnLCAnMTAuMC4wLjEwJyk="
+}
+```
+
+Decoded SQL:
+
+```sql
+INSERT INTO Devices (devMac, devName, devFirstConnection, devLastConnection, devLastIP)
+VALUES ('6A:BB:4C:5D:6E', 'TestDevice', '2025-08-30 12:00:00', '2025-08-30 12:00:00', '10.0.0.10');
+```
+
+#### Response
+
+```json
+{ "success": true, "affected_rows": 1 }
+```
+
+#### `curl` Example
+
+```bash
+curl -X POST "http://<server_ip>:<GRAPHQL_PORT>/dbquery/write" \
+  -H "Authorization: Bearer <API_TOKEN>" \
+  -H "Accept: application/json" \
+  -H "Content-Type: application/json" \
+  -d '{
+    "rawSql": "SU5TRVJUIElOVE8gRGV2aWNlcyAoZGV2TWFjLCBkZXYgTmFtZSwgZGV2Rmlyc3RDb25uZWN0aW9uLCBkZXZMYXN0Q29ubmVjdGlvbiwgZGV2TGFzdElQKSBWQUxVRVMgKCc2QTpCQjo0Qzo1RDo2RTonLCAnVGVzdERldmljZScsICcyMDI1LTA4LTMwIDEyOjAwOjAwJywgJzIwMjUtMDgtMzAgMTI6MDA6MDAnLCAnMTAuMC4wLjEwJyk="
+  }'
+```
+
+---
+
+### 4. `POST /dbquery/delete`
+
+Delete rows in a table by `columnName` + `id`.
+
+#### Request Body
+
+```json
+{
+  "columnName": "devMac",
+  "id": ["AA:BB:CC:DD:EE:FF"],
+  "dbtable": "Devices"
+}
+```
+
+#### Response
+
+```json
+{ "success": true, "deleted_count": 1 }
+```
+
+#### `curl` Example
+
+```bash
+curl -X POST "http://<server_ip>:<GRAPHQL_PORT>/dbquery/delete" \
+  -H "Authorization: Bearer <API_TOKEN>" \
+  -H "Accept: application/json" \
+  -H "Content-Type: application/json" \
+  -d '{
+    "columnName": "devMac",
+    "id": ["AA:BB:CC:DD:EE:FF"],
+    "dbtable": "Devices"
+  }'
+```

docs/API_DEVICE.md

@@ -0,0 +1,233 @@
+# Device API Endpoints
+
+Manage a **single device** by its MAC address. Operations include retrieval, updates, deletion, resetting properties, and copying data between devices. All endpoints require **authorization** via Bearer token.
+
+---
+
+## 1. Retrieve Device Details
+
+* **GET** `/device/<mac>`
+  Fetch all details for a single device, including:
+
+* Computed status (`devStatus`) → `On-line`, `Off-line`, or `Down`
+* Session and event counts (`devSessions`, `devEvents`, `devDownAlerts`)
+* Presence hours (`devPresenceHours`)
+* Children devices (`devChildrenDynamic`) and NIC children (`devChildrenNicsDynamic`)
+
+**Special case**: `mac=new` returns a template for a new device with default values.
+
+**Response** (success):
+
+```json
+{
+  "devMac": "AA:BB:CC:DD:EE:FF",
+  "devName": "Net - Huawei",
+  "devOwner": "Admin",
+  "devType": "Router",
+  "devVendor": "Huawei",
+  "devStatus": "On-line",
+  "devSessions": 12,
+  "devEvents": 5,
+  "devDownAlerts": 1,
+  "devPresenceHours": 32,
+  "devChildrenDynamic": [...],
+  "devChildrenNicsDynamic": [...],
+  ...
+}
+```
+
+**Error Responses**:
+
+* Device not found → HTTP 404
+* Unauthorized → HTTP 403
+
+---
+
+## 2. Update Device Fields
+
+* **POST** `/device/<mac>`
+  Create or update a device record.
+
+**Request Body**:
+
+```json
+{
+  "devName": "New Device",
+  "devOwner": "Admin",
+  "createNew": true
+}
+```
+
+**Behavior**:
+
+* If `createNew=true` → creates a new device
+* Otherwise → updates existing device fields
+
+**Response**:
+
+```json
+{
+  "success": true
+}
+```
+
+**Error Responses**:
+
+* Unauthorized → HTTP 403
+
+---
+
+## 3. Delete a Device
+
+* **DELETE** `/device/<mac>/delete`
+  Deletes the device with the given MAC.
+
+**Response**:
+
+```json
+{
+  "success": true
+}
+```
+
+**Error Responses**:
+
+* Unauthorized → HTTP 403
+
+---
+
+## 4. Delete All Events for a Device
+
+* **DELETE** `/device/<mac>/events/delete`
+  Removes all events associated with a device.
+
+**Response**:
+
+```json
+{
+  "success": true
+}
+```
+
+---
+
+## 5. Reset Device Properties
+
+* **POST** `/device/<mac>/reset-props`
+  Resets the device's custom properties to default values.
+
+**Request Body**: Optional JSON for additional parameters.
+
+**Response**:
+
+```json
+{
+  "success": true
+}
+```
+
+---
+
+## 6. Copy Device Data
+
+* **POST** `/device/copy`
+  Copy all data from one device to another. If a device exists with `macTo`, it is replaced.
+
+**Request Body**:
+
+```json
+{
+  "macFrom": "AA:BB:CC:DD:EE:FF",
+  "macTo": "11:22:33:44:55:66"
+}
+```
+
+**Response**:
+
+```json
+{
+  "success": true,
+  "message": "Device copied from AA:BB:CC:DD:EE:FF to 11:22:33:44:55:66"
+}
+```
+
+**Error Responses**:
+
+* Missing `macFrom` or `macTo` → HTTP 400
+* Unauthorized → HTTP 403
+
+---
+
+## 7. Update a Single Column
+
+* **POST** `/device/<mac>/update-column`
+  Update one specific column for a device.
+
+**Request Body**:
+
+```json
+{
+  "columnName": "devName",
+  "columnValue": "Updated Device Name"
+}
+```
+
+**Response** (success):
+
+```json
+{
+  "success": true
+}
+```
+
+**Error Responses**:
+
+* Device not found → HTTP 404
+* Missing `columnName` or `columnValue` → HTTP 400
+* Unauthorized → HTTP 403
+
+---
+
+## Example `curl` Requests
+
+**Get Device Details**:
+
+```bash
+curl -X GET "http://<server_ip>:<GRAPHQL_PORT>/device/AA:BB:CC:DD:EE:FF" \
+  -H "Authorization: Bearer <API_TOKEN>"
+```
+
+**Update Device Fields**:
+
+```bash
+curl -X POST "http://<server_ip>:<GRAPHQL_PORT>/device/AA:BB:CC:DD:EE:FF" \
+  -H "Authorization: Bearer <API_TOKEN>" \
+  -H "Content-Type: application/json" \
+  --data '{"devName": "New Device Name"}'
+```
+
+**Delete Device**:
+
+```bash
+curl -X DELETE "http://<server_ip>:<GRAPHQL_PORT>/device/AA:BB:CC:DD:EE:FF/delete" \
+  -H "Authorization: Bearer <API_TOKEN>"
+```
+
+**Copy Device Data**:
+
+```bash
+curl -X POST "http://<server_ip>:<GRAPHQL_PORT>/device/copy" \
+  -H "Authorization: Bearer <API_TOKEN>" \
+  -H "Content-Type: application/json" \
+  --data '{"macFrom":"AA:BB:CC:DD:EE:FF","macTo":"11:22:33:44:55:66"}'
+```
+
+**Update Single Column**:
+
+```bash
+curl -X POST "http://<server_ip>:<GRAPHQL_PORT>/device/AA:BB:CC:DD:EE:FF/update-column" \
+  -H "Authorization: Bearer <API_TOKEN>" \
+  -H "Content-Type: application/json" \
+  --data '{"columnName":"devName","columnValue":"Updated Device"}'
+```
+

docs/API_DEVICES.md

@@ -0,0 +1,249 @@
+# Devices Collection API Endpoints
+
+The Devices Collection API provides operations to **retrieve, manage, import/export, and filter devices** in bulk. All endpoints require **authorization** via Bearer token.
+
+---
+
+## Endpoints
+
+### 1. Get All Devices
+
+* **GET** `/devices`
+  Retrieves all devices from the database.
+
+**Response** (success):
+
+```json
+{
+  "success": true,
+  "devices": [
+    {
+      "devName": "Net - Huawei",
+      "devMAC": "AA:BB:CC:DD:EE:FF",
+      "devIP": "192.168.1.1",
+      "devType": "Router",
+      "devFavorite": 0,
+      "devStatus": "online"
+    },
+    ...
+  ]
+}
+```
+
+**Error Responses**:
+
+* Unauthorized → HTTP 403
+
+---
+
+### 2. Delete Devices by MAC
+
+* **DELETE** `/devices`
+  Deletes devices by MAC address. Supports exact matches or wildcard `*`.
+
+**Request Body**:
+
+```json
+{
+  "macs": ["AA:BB:CC:DD:EE:FF", "11:22:33:*"]
+}
+```
+
+**Behavior**:
+
+* If `macs` is omitted or `null` → deletes **all devices**.
+* Wildcards `*` match multiple devices.
+
+**Response**:
+
+```json
+{
+  "success": true,
+  "deleted_count": 5
+}
+```
+
+**Error Responses**:
+
+* Unauthorized → HTTP 403
+
+---
+
+### 3. Delete Devices with Empty MACs
+
+* **DELETE** `/devices/empty-macs`
+  Removes all devices where MAC address is null or empty.
+
+**Response**:
+
+```json
+{
+  "success": true,
+  "deleted": 3
+}
+```
+
+---
+
+### 4. Delete Unknown Devices
+
+* **DELETE** `/devices/unknown`
+  Deletes devices with names marked as `(unknown)` or `(name not found)`.
+
+**Response**:
+
+```json
+{
+  "success": true,
+  "deleted": 2
+}
+```
+
+---
+
+### 5. Export Devices
+
+* **GET** `/devices/export` or `/devices/export/<format>`
+  Exports all devices in **CSV** (default) or **JSON** format.
+
+**Query Parameter / URL Parameter**:
+
+* `format` (optional) → `csv` (default) or `json`
+
+**CSV Response**:
+
+* Returns as a downloadable CSV file: `Content-Disposition: attachment; filename=devices.csv`
+
+**JSON Response**:
+
+```json
+{
+  "data": [
+    { "devName": "Net - Huawei", "devMAC": "AA:BB:CC:DD:EE:FF", ... },
+    ...
+  ],
+  "columns": ["devName", "devMAC", "devIP", "devType", "devFavorite", "devStatus"]
+}
+```
+
+**Error Responses**:
+
+* Unsupported format → HTTP 400
+
+---
+
+### 6. Import Devices from CSV
+
+* **POST** `/devices/import`
+  Imports devices from an uploaded CSV or base64-encoded CSV content.
+
+**Request Body** (multipart file or JSON with `content` field):
+
+```json
+{
+  "content": "<base64-encoded CSV content>"
+}
+```
+
+**Response**:
+
+```json
+{
+  "success": true,
+  "inserted": 25,
+  "skipped_lines": [3, 7]
+}
+```
+
+**Error Responses**:
+
+* Missing file or content → HTTP 400 / 404
+* CSV malformed → HTTP 400
+
+---
+
+### 7. Get Device Totals
+
+* **GET** `/devices/totals`
+  Returns counts of devices by various categories.
+
+**Response**:
+
+```json
+[ 
+  120,    // Total devices
+  85,     // Connected
+  5,      // Favorites
+  10,     // New
+  8,      // Down
+  12      // Archived
+]
+```
+
+*Order: `[all, connected, favorites, new, down, archived]`*
+
+---
+
+### 8. Get Devices by Status
+
+* **GET** `/devices/by-status?status=<status>`
+  Returns devices filtered by status.
+
+**Query Parameter**:
+
+* `status` → Supported values: `online`, `offline`, `down`, `archived`, `favorites`, `new`, `my`
+* If omitted, returns **all devices**.
+
+**Response** (success):
+
+```json
+[
+  { "id": "AA:BB:CC:DD:EE:FF", "title": "Net - Huawei", "favorite": 0 },
+  { "id": "11:22:33:44:55:66", "title": "★ USG Firewall", "favorite": 1 }
+]
+```
+
+*If `devFavorite=1`, the title is prepended with a star `★`.*
+
+---
+
+## Example `curl` Requests
+
+**Get All Devices**:
+
+```sh
+curl -X GET "http://<server_ip>:<GRAPHQL_PORT>/devices" \
+  -H "Authorization: Bearer <API_TOKEN>"
+```
+
+**Delete Devices by MAC**:
+
+```sh
+curl -X DELETE "http://<server_ip>:<GRAPHQL_PORT>/devices" \
+  -H "Authorization: Bearer <API_TOKEN>" \
+  -H "Content-Type: application/json" \
+  --data '{"macs":["AA:BB:CC:DD:EE:FF","11:22:33:*"]}'
+```
+
+**Export Devices CSV**:
+
+```sh
+curl -X GET "http://<server_ip>:<GRAPHQL_PORT>/devices/export?format=csv" \
+  -H "Authorization: Bearer <API_TOKEN>"
+```
+
+**Import Devices from CSV**:
+
+```sh
+curl -X POST "http://<server_ip>:<GRAPHQL_PORT>/devices/import" \
+  -H "Authorization: Bearer <API_TOKEN>" \
+  -F "file=@devices.csv"
+```
+
+**Get Devices by Status**:
+
+```sh
+curl -X GET "http://<server_ip>:<GRAPHQL_PORT>/devices/by-status?status=online" \
+  -H "Authorization: Bearer <API_TOKEN>"
+```
+

docs/API_EVENTS.md

@@ -0,0 +1,169 @@
+# Events API Endpoints
+
+The Events API provides access to **device event logs**, allowing creation, retrieval, deletion, and summary of events over time.
+
+---
+
+## Endpoints
+
+### 1. Create Event
+
+* **POST** `/events/create/<mac>`
+  Create an event for a device identified by its MAC address.
+
+**Request Body** (JSON):
+
+```json
+{
+  "ip": "192.168.1.10",
+  "event_type": "Device Down",
+  "additional_info": "Optional info about the event",
+  "pending_alert": 1,
+  "event_time": "2025-08-24T12:00:00Z"
+}
+```
+
+* **Parameters**:
+
+  * `ip` (string, optional): IP address of the device
+  * `event_type` (string, optional): Type of event (default `"Device Down"`)
+  * `additional_info` (string, optional): Extra information
+  * `pending_alert` (int, optional): 1 if alert email is pending (default 1)
+  * `event_time` (ISO datetime, optional): Event timestamp; defaults to current time
+
+**Response** (JSON):
+
+```json
+{
+  "success": true,
+  "message": "Event created for 00:11:22:33:44:55"
+}
+```
+
+---
+
+### 2. Get Events
+
+* **GET** `/events`
+  Retrieve all events, optionally filtered by MAC address:
+
+```
+/events?mac=<mac>
+```
+
+**Response**:
+
+```json
+{
+  "success": true,
+  "events": [
+    {
+      "eve_MAC": "00:11:22:33:44:55",
+      "eve_IP": "192.168.1.10",
+      "eve_DateTime": "2025-08-24T12:00:00Z",
+      "eve_EventType": "Device Down",
+      "eve_AdditionalInfo": "",
+      "eve_PendingAlertEmail": 1
+    }
+  ]
+}
+```
+
+---
+
+### 3. Delete Events
+
+* **DELETE** `/events/<mac>` → Delete events for a specific MAC
+* **DELETE** `/events` → Delete **all** events
+* **DELETE** `/events/<days>` → Delete events older than N days
+
+**Response**:
+
+```json
+{
+  "success": true,
+  "message": "Deleted events older than <days> days"
+}
+```
+
+---
+
+### 4. Event Totals Over a Period
+
+* **GET** `/sessions/totals?period=<period>`
+  Return event and session totals over a given period.
+
+**Query Parameters**:
+
+| Parameter | Description                                                                      |
+| --------- | -------------------------------------------------------------------------------- |
+| `period`  | Time period for totals, e.g., `"7 days"`, `"1 month"`, `"1 year"`, `"100 years"` |
+
+**Sample Response** (JSON Array):
+
+```json
+[120, 85, 5, 10, 3, 7]
+```
+
+**Meaning of Values**:
+
+1. Total events in the period
+2. Total sessions
+3. Missing sessions
+4. Voided events (`eve_EventType LIKE 'VOIDED%'`)
+5. New device events (`eve_EventType LIKE 'New Device'`)
+6. Device down events (`eve_EventType LIKE 'Device Down'`)
+
+---
+
+## Notes
+
+* All endpoints require **authorization** (Bearer token). Unauthorized requests return:
+
+```json
+{ "error": "Forbidden" }
+```
+
+* Events are stored in the **Events table** with the following fields:
+  `eve_MAC`, `eve_IP`, `eve_DateTime`, `eve_EventType`, `eve_AdditionalInfo`, `eve_PendingAlertEmail`.
+
+* Event creation automatically logs activity for debugging.
+
+---
+
+## Example `curl` Requests
+
+**Create Event**:
+
+```sh
+curl -X POST "http://<server_ip>:<GRAPHQL_PORT>/events/create/00:11:22:33:44:55" \
+  -H "Authorization: Bearer <API_TOKEN>" \
+  -H "Content-Type: application/json" \
+  --data '{
+    "ip": "192.168.1.10",
+    "event_type": "Device Down",
+    "additional_info": "Power outage",
+    "pending_alert": 1
+  }'
+```
+
+**Get Events for a Device**:
+
+```sh
+curl "http://<server_ip>:<GRAPHQL_PORT>/events?mac=00:11:22:33:44:55" \
+  -H "Authorization: Bearer <API_TOKEN>"
+```
+
+**Delete Events Older Than 30 Days**:
+
+```sh
+curl -X DELETE "http://<server_ip>:<GRAPHQL_PORT>/events/30" \
+  -H "Authorization: Bearer <API_TOKEN>"
+```
+
+**Get Event Totals for 7 Days**:
+
+```sh
+curl "http://<server_ip>:<GRAPHQL_PORT>/sessions/totals?period=7 days" \
+  -H "Authorization: Bearer <API_TOKEN>"
+```

docs/API_GRAPHQL.md

@@ -0,0 +1,264 @@
+# GraphQL API Endpoint
+
+GraphQL queries are **read-optimized for speed**. Data may be slightly out of date until the file system cache refreshes. The GraphQL endpoints allow you to access the following objects:
+
+* Devices
+* Settings
+* Language Strings (LangStrings)
+
+## Endpoints
+
+* **GET** `/graphql`
+  Returns a simple status message (useful for browser or debugging).
+
+* **POST** `/graphql`
+  Execute GraphQL queries against the `devicesSchema`.
+
+---
+
+## Devices Query
+
+### Sample Query
+
+```graphql
+query GetDevices($options: PageQueryOptionsInput) {
+  devices(options: $options) {
+    devices {
+      rowid
+      devMac
+      devName
+      devOwner
+      devType
+      devVendor
+      devLastConnection
+      devStatus
+    }
+    count
+  }
+}
+```
+
+### Query Parameters
+
+| Parameter | Description                                                                                             |
+| --------- | ------------------------------------------------------------------------------------------------------- |
+| `page`    | Page number of results to fetch.                                                                        |
+| `limit`   | Number of results per page.                                                                             |
+| `sort`    | Sorting options (`field` = field name, `order` = `asc` or `desc`).                                      |
+| `search`  | Term to filter devices.                                                                                 |
+| `status`  | Filter devices by status: `my_devices`, `connected`, `favorites`, `new`, `down`, `archived`, `offline`. |
+| `filters` | Additional filters (array of `{ filterColumn, filterValue }`).                                          |
+
+---
+
+### `curl` Example
+
+```sh
+curl 'http://host:GRAPHQL_PORT/graphql' \
+  -X POST \
+  -H 'Authorization: Bearer API_TOKEN' \
+  -H 'Content-Type: application/json' \
+  --data '{
+    "query": "query GetDevices($options: PageQueryOptionsInput) { devices(options: $options) { devices { rowid devMac devName devOwner devType devVendor devLastConnection devStatus } count } }",
+    "variables": {
+      "options": {
+        "page": 1,
+        "limit": 10,
+        "sort": [{ "field": "devName", "order": "asc" }],
+        "search": "",
+        "status": "connected"
+      }
+    }
+  }'
+```
+
+---
+
+### Sample Response
+
+```json
+{
+  "data": {
+    "devices": {
+      "devices": [
+        {
+          "rowid": 1,
+          "devMac": "00:11:22:33:44:55",
+          "devName": "Device 1",
+          "devOwner": "Owner 1",
+          "devType": "Type 1",
+          "devVendor": "Vendor 1",
+          "devLastConnection": "2025-01-01T00:00:00Z",
+          "devStatus": "connected"
+        }
+      ],
+      "count": 1
+    }
+  }
+}
+```
+
+---
+
+## Settings Query
+
+The **settings query** provides access to NetAlertX configuration stored in the settings table.
+
+### Sample Query
+
+```graphql
+query GetSettings {
+  settings {
+    settings {
+      setKey
+      setName
+      setDescription
+      setType
+      setOptions
+      setGroup
+      setValue
+      setEvents
+      setOverriddenByEnv
+    }
+    count
+  }
+}
+```
+
+### Schema Fields
+
+| Field                | Type    | Description                                                              |
+| -------------------- | ------- | ------------------------------------------------------------------------ |
+| `setKey`             | String  | Unique key identifier for the setting.                                   |
+| `setName`            | String  | Human-readable name.                                                     |
+| `setDescription`     | String  | Description or documentation of the setting.                             |
+| `setType`            | String  | Data type (`string`, `int`, `bool`, `json`, etc.).                       |
+| `setOptions`         | String  | Available options (for dropdown/select-type settings).                   |
+| `setGroup`           | String  | Group/category the setting belongs to.                                   |
+| `setValue`           | String  | Current value of the setting.                                            |
+| `setEvents`          | String  | Events or triggers related to this setting.                              |
+| `setOverriddenByEnv` | Boolean | Whether the setting is overridden by an environment variable at runtime. |
+
+---
+
+### `curl` Example
+
+```sh
+curl 'http://host:GRAPHQL_PORT/graphql' \
+  -X POST \
+  -H 'Authorization: Bearer API_TOKEN' \
+  -H 'Content-Type: application/json' \
+  --data '{
+    "query": "query GetSettings { settings { settings { setKey setName setDescription setType setOptions setGroup setValue setEvents setOverriddenByEnv } count } }"
+  }'
+```
+
+---
+
+### Sample Response
+
+```json
+{
+  "data": {
+    "settings": {
+      "settings": [
+        {
+          "setKey": "UI_MY_DEVICES",
+          "setName": "My Devices Filter",
+          "setDescription": "Defines which statuses to include in the 'My Devices' view.",
+          "setType": "list",
+          "setOptions": "[\"online\",\"new\",\"down\",\"offline\",\"archived\"]",
+          "setGroup": "UI",
+          "setValue": "[\"online\",\"new\"]",
+          "setEvents": null,
+          "setOverriddenByEnv": false
+        },
+        {
+          "setKey": "NETWORK_DEVICE_TYPES",
+          "setName": "Network Device Types",
+          "setDescription": "Types of devices considered as network infrastructure.",
+          "setType": "list",
+          "setOptions": "[\"Router\",\"Switch\",\"AP\"]",
+          "setGroup": "Network",
+          "setValue": "[\"Router\",\"Switch\"]",
+          "setEvents": null,
+          "setOverriddenByEnv": true
+        }
+      ],
+      "count": 2
+    }
+  }
+}
+```
+
+
+---
+
+## LangStrings Query
+
+The **LangStrings query** provides access to localized strings. Supports filtering by `langCode` and `langStringKey`. If the requested string is missing or empty, you can optionally fallback to `en_us`.
+
+### Sample Query
+
+```graphql
+query GetLangStrings {
+  langStrings(langCode: "de_de", langStringKey: "settings_other_scanners") {
+    langStrings {
+      langCode
+      langStringKey
+      langStringText
+    }
+    count
+  }
+}
+```
+
+### Query Parameters
+
+| Parameter        | Type    | Description                                                                              |
+| ---------------- | ------- | ---------------------------------------------------------------------------------------- |
+| `langCode`       | String  | Optional language code (e.g., `en_us`, `de_de`). If omitted, all languages are returned. |
+| `langStringKey`  | String  | Optional string key to retrieve a specific entry.                                        |
+| `fallback_to_en` | Boolean | Optional (default `true`). If `true`, empty or missing strings fallback to `en_us`.      |
+
+### `curl` Example
+
+```sh
+curl 'http://host:GRAPHQL_PORT/graphql' \
+  -X POST \
+  -H 'Authorization: Bearer API_TOKEN' \
+  -H 'Content-Type: application/json' \
+  --data '{
+    "query": "query GetLangStrings { langStrings(langCode: \"de_de\", langStringKey: \"settings_other_scanners\") { langStrings { langCode langStringKey langStringText } count } }"
+  }'
+```
+
+### Sample Response
+
+```json
+{
+  "data": {
+    "langStrings": {
+      "count": 1,
+      "langStrings": [
+        {
+          "langCode": "de_de",
+          "langStringKey": "settings_other_scanners",
+          "langStringText": "Other, non-device scanner plugins that are currently enabled."  // falls back to en_us if empty
+        }
+      ]
+    }
+  }
+}
+```
+
+---
+
+## Notes
+
+* Device, settings, and LangStrings queries can be combined in **one request** since GraphQL supports batching.
+* The `fallback_to_en` feature ensures UI always has a value even if a translation is missing.
+* Data is **cached in memory** per JSON file; changes to language or plugin files will only refresh after the cache detects a file modification.
+* The `setOverriddenByEnv` flag helps identify setting values that are locked at container runtime.
+* The schema is **read-only** — updates must be performed through other APIs or configuration management. See the other [API](API.md) endpoints for details. 
+

docs/API_LOGS.md

@@ -0,0 +1,179 @@
+# Logs API Endpoints
+
+Manage or purge application log files stored under `/app/log` and manage the execution queue. These endpoints are primarily used for maintenance tasks such as clearing accumulated logs or adding system actions without restarting the container.
+
+Only specific, pre-approved log files can be purged for security and stability reasons.
+
+---
+
+## Delete (Purge) a Log File
+
+* **DELETE** `/logs?file=<log_file>` → Purge the contents of an allowed log file.
+
+**Query Parameter:**
+
+* `file` → The name of the log file to purge (e.g., `app.log`, `stdout.log`)
+
+**Allowed Files:**
+
+```
+app.log
+app_front.log
+IP_changes.log
+stdout.log
+stderr.log
+app.php_errors.log
+execution_queue.log
+db_is_locked.log
+```
+
+**Authorization:**
+Requires a valid API token in the `Authorization` header.
+
+---
+
+### `curl` Example (Success)
+
+```sh
+curl -X DELETE 'http://<server_ip>:<GRAPHQL_PORT>/logs?file=app.log' \
+  -H 'Authorization: Bearer <API_TOKEN>' \
+  -H 'Accept: application/json'
+```
+
+**Response:**
+
+```json
+{
+  "success": true,
+  "message": "[clean_log] File app.log purged successfully"
+}
+```
+
+---
+
+### `curl` Example (Not Allowed)
+
+```sh
+curl -X DELETE 'http://<server_ip>:<GRAPHQL_PORT>/logs?file=not_allowed.log' \
+  -H 'Authorization: Bearer <API_TOKEN>' \
+  -H 'Accept: application/json'
+```
+
+**Response:**
+
+```json
+{
+  "success": false,
+  "message": "[clean_log] File not_allowed.log is not allowed to be purged"
+}
+```
+
+---
+
+### `curl` Example (Unauthorized)
+
+```sh
+curl -X DELETE 'http://<server_ip>:<GRAPHQL_PORT>/logs?file=app.log' \
+  -H 'Accept: application/json'
+```
+
+**Response:**
+
+```json
+{
+  "error": "Forbidden"
+}
+```
+
+---
+
+## Add an Action to the Execution Queue
+
+* **POST** `/logs/add-to-execution-queue` → Add a system action to the execution queue.
+
+**Request Body (JSON):**
+
+```json
+{
+  "action": "update_api|devices"
+}
+```
+
+**Authorization:**
+Requires a valid API token in the `Authorization` header.
+
+---
+
+### `curl` Example (Success)
+
+The below will update the API cache for Devices
+
+```sh
+curl -X POST 'http://<server_ip>:<GRAPHQL_PORT>/logs/add-to-execution-queue' \
+  -H 'Authorization: Bearer <API_TOKEN>' \
+  -H 'Content-Type: application/json' \
+  --data '{"action": "update_api|devices"}'
+```
+
+**Response:**
+
+```json
+{
+  "success": true,
+  "message": "[UserEventsQueueInstance] Action \"update_api|devices\" added to the execution queue."
+}
+```
+
+---
+
+### `curl` Example (Missing Parameter)
+
+```sh
+curl -X POST 'http://<server_ip>:<GRAPHQL_PORT>/logs/add-to-execution-queue' \
+  -H 'Authorization: Bearer <API_TOKEN>' \
+  -H 'Content-Type: application/json' \
+  --data '{}'
+```
+
+**Response:**
+
+```json
+{
+  "success": false,
+  "message": "Missing parameters",
+  "error": "Missing required 'action' field in JSON body"
+}
+```
+
+---
+
+### `curl` Example (Unauthorized)
+
+```sh
+curl -X POST 'http://<server_ip>:<GRAPHQL_PORT>/logs/add-to-execution-queue' \
+  -H 'Content-Type: application/json' \
+  --data '{"action": "update_api|devices"}'
+```
+
+**Response:**
+
+```json
+{
+  "error": "Forbidden"
+}
+```
+
+---
+
+## Notes
+
+* Only predefined files in `/app/log` can be purged — arbitrary paths are **not permitted**.
+* When a log file is purged:
+
+  * Its content is replaced with a short marker text: `"File manually purged"`.
+  * A backend log entry is created via `mylog()`.
+  * A frontend notification is generated via `write_notification()`.
+* Execution queue actions are appended to `execution_queue.log` and can be processed asynchronously by background tasks or workflows.
+* Unauthorized or invalid attempts are safely logged and rejected.
+* For advanced log retrieval, analysis, or structured querying, use the frontend log viewer.
+* Always ensure that sensitive or production logs are handled carefully — purging cannot be undone.

docs/API_MESSAGING_IN_APP.md

@@ -0,0 +1,173 @@
+# In-app Notifications API
+
+Manage in-app notifications for users. Notifications can be written, retrieved, marked as read, or deleted.
+
+---
+
+### Write Notification
+
+* **POST** `/messaging/in-app/write` → Create a new in-app notification.
+
+  **Request Body:**
+
+  ```json
+  {
+    "content": "This is a test notification",
+    "level": "alert"   // optional, ["interrupt","info","alert"]  default: "alert"
+  }
+  ```
+
+  **Response:**
+
+  ```json
+  {
+    "success": true
+  }
+  ```
+
+#### `curl` Example
+
+```bash
+curl -X POST "http://<server_ip>:<GRAPHQL_PORT>/messaging/in-app/write" \
+  -H "Authorization: Bearer <API_TOKEN>" \
+  -H "Accept: application/json" \
+  -H "Content-Type: application/json" \
+  -d '{
+    "content": "This is a test notification",
+    "level": "alert"
+  }'
+```
+
+---
+
+### Get Unread Notifications
+
+* **GET** `/messaging/in-app/unread` → Retrieve all unread notifications.
+
+  **Response:**
+
+  ```json
+  [
+    {
+      "timestamp": "2025-10-10T12:34:56",
+      "guid": "f47ac10b-58cc-4372-a567-0e02b2c3d479",
+      "read": 0,
+      "level": "alert",
+      "content": "This is a test notification"
+    }
+  ]
+  ```
+
+#### `curl` Example
+
+```bash
+curl -X GET "http://<server_ip>:<GRAPHQL_PORT>/messaging/in-app/unread" \
+  -H "Authorization: Bearer <API_TOKEN>" \
+  -H "Accept: application/json"
+```
+
+---
+
+### Mark All Notifications as Read
+
+* **POST** `/messaging/in-app/read/all` → Mark all notifications as read.
+
+  **Response:**
+
+  ```json
+  {
+    "success": true
+  }
+  ```
+
+#### `curl` Example
+
+```bash
+curl -X POST "http://<server_ip>:<GRAPHQL_PORT>/messaging/in-app/read/all" \
+  -H "Authorization: Bearer <API_TOKEN>" \
+  -H "Accept: application/json"
+```
+
+---
+
+### Mark Single Notification as Read
+
+* **POST** `/messaging/in-app/read/<guid>` → Mark a single notification as read using its GUID.
+
+  **Response (success):**
+
+  ```json
+  {
+    "success": true
+  }
+  ```
+
+  **Response (failure):**
+
+  ```json
+  {
+    "success": false,
+    "error": "Notification not found"
+  }
+  ```
+
+#### `curl` Example
+
+```bash
+curl -X POST "http://<server_ip>:<GRAPHQL_PORT>/messaging/in-app/read/f47ac10b-58cc-4372-a567-0e02b2c3d479" \
+  -H "Authorization: Bearer <API_TOKEN>" \
+  -H "Accept: application/json"
+```
+
+---
+
+### Delete All Notifications
+
+* **DELETE** `/messaging/in-app/delete` → Remove all notifications from the system.
+
+  **Response:**
+
+  ```json
+  {
+    "success": true
+  }
+  ```
+
+#### `curl` Example
+
+```bash
+curl -X DELETE "http://<server_ip>:<GRAPHQL_PORT>/messaging/in-app/delete" \
+  -H "Authorization: Bearer <API_TOKEN>" \
+  -H "Accept: application/json"
+```
+
+---
+
+### Delete Single Notification
+
+* **DELETE** `/messaging/in-app/delete/<guid>` → Remove a single notification by its GUID.
+
+  **Response (success):**
+
+  ```json
+  {
+    "success": true
+  }
+  ```
+
+  **Response (failure):**
+
+  ```json
+  {
+    "success": false,
+    "error": "Notification not found"
+  }
+  ```
+
+#### `curl` Example
+
+```bash
+curl -X DELETE "http://<server_ip>:<GRAPHQL_PORT>/messaging/in-app/delete/f47ac10b-58cc-4372-a567-0e02b2c3d479" \
+  -H "Authorization: Bearer <API_TOKEN>" \
+  -H "Accept: application/json"
+```

docs/API_METRICS.md

@@ -0,0 +1,103 @@
+# Metrics API Endpoint
+
+The `/metrics` endpoint exposes **Prometheus-compatible metrics** for NetAlertX, including aggregate device counts and per-device status.
+
+---
+
+## Endpoint Details
+
+* **GET** `/metrics` → Returns metrics in plain text.
+* **Host**: NetAlertX server
+* **Port**: As configured in `GRAPHQL_PORT` (default: `20212`)
+
+---
+
+## Example Output
+
+```text
+netalertx_connected_devices 31
+netalertx_offline_devices 54
+netalertx_down_devices 0
+netalertx_new_devices 0
+netalertx_archived_devices 31
+netalertx_favorite_devices 2
+netalertx_my_devices 54
+
+netalertx_device_status{device="Net - Huawei", mac="Internet", ip="1111.111.111.111", vendor="None", first_connection="2021-01-01 00:00:00", last_connection="2025-08-04 17:57:00", dev_type="Router", device_status="Online"} 1
+netalertx_device_status{device="Net - USG", mac="74:ac:74:ac:74:ac", ip="192.168.1.1", vendor="Ubiquiti Networks Inc.", first_connection="2022-02-12 22:05:00", last_connection="2025-06-07 08:16:49", dev_type="Firewall", device_status="Archived"} 1
+netalertx_device_status{device="Raspberry Pi 4 LAN", mac="74:ac:74:ac:74:74", ip="192.168.1.9", vendor="Raspberry Pi Trading Ltd", first_connection="2022-02-12 22:05:00", last_connection="2025-08-04 17:57:00", dev_type="Singleboard Computer (SBC)", device_status="Online"} 1
+...
+```
+
+---
+
+## Metrics Overview
+
+### 1. Aggregate Device Counts
+
+| Metric                        | Description                              |
+| ----------------------------- | ---------------------------------------- |
+| `netalertx_connected_devices` | Devices currently connected              |
+| `netalertx_offline_devices`   | Devices currently offline                |
+| `netalertx_down_devices`      | Down/unreachable devices                 |
+| `netalertx_new_devices`       | Recently detected devices                |
+| `netalertx_archived_devices`  | Archived devices                         |
+| `netalertx_favorite_devices`  | User-marked favorites                    |
+| `netalertx_my_devices`        | Devices associated with the current user |
+
+---
+
+### 2. Per-Device Status
+
+Metric: `netalertx_device_status`
+Each device has labels:
+
+* `device`: friendly name
+* `mac`: MAC address (or placeholder)
+* `ip`: last recorded IP
+* `vendor`: manufacturer or "None"
+* `first_connection`: timestamp of first detection
+* `last_connection`: most recent contact
+* `dev_type`: device type/category
+* `device_status`: current status (`Online`, `Offline`, `Archived`, `Down`, …)
+
+Metric value is always `1` (presence indicator).
+
+---
+
+## Querying with `curl`
+
+```sh
+curl 'http://<server_ip>:<GRAPHQL_PORT>/metrics' \
+  -H 'Authorization: Bearer <API_TOKEN>' \
+  -H 'Accept: text/plain'
+```
+
+Replace placeholders:
+
+* `<server_ip>` – NetAlertX host IP/hostname
+* `<GRAPHQL_PORT>` – configured port (default `20212`)
+* `<API_TOKEN>` – your API token
+
+---
+
+## Prometheus Scraping Configuration
+
+```yaml
+scrape_configs:
+  - job_name: 'netalertx'
+    metrics_path: /metrics
+    scheme: http
+    scrape_interval: 60s
+    static_configs:
+      - targets: ['<server_ip>:<GRAPHQL_PORT>']
+    authorization:
+      type: Bearer
+      credentials: <API_TOKEN>
+```
+
+---
+
+## Grafana Dashboard Template
+
+Sample template JSON: [Download](./samples/API/Grafana_Dashboard.json)

docs/API_NETTOOLS.md

@@ -0,0 +1,243 @@
+# Net Tools API Endpoints
+
+The Net Tools API provides **network diagnostic utilities**, including Wake-on-LAN, traceroute, speed testing, DNS resolution, nmap scanning, and internet connection information.
+
+All endpoints require **authorization** via Bearer token.
+
+---
+
+## Endpoints
+
+### 1. Wake-on-LAN
+
+* **POST** `/nettools/wakeonlan`
+  Sends a Wake-on-LAN packet to wake a device.
+
+**Request Body** (JSON):
+
+```json
+{
+  "devMac": "AA:BB:CC:DD:EE:FF"
+}
+```
+
+**Response** (success):
+
+```json
+{
+  "success": true,
+  "message": "WOL packet sent",
+  "output": "Sent magic packet to AA:BB:CC:DD:EE:FF"
+}
+```
+
+**Error Responses**:
+
+* Invalid MAC address → HTTP 400
+* Command failure → HTTP 500
+
+---
+
+### 2. Traceroute
+
+* **POST** `/nettools/traceroute`
+  Performs a traceroute to a specified IP address.
+
+**Request Body**:
+
+```json
+{
+  "devLastIP": "192.168.1.1"
+}
+```
+
+**Response** (success):
+
+```json
+{
+  "success": true,
+  "output": "traceroute output as string"
+}
+```
+
+**Error Responses**:
+
+* Invalid IP → HTTP 400
+* Traceroute command failure → HTTP 500
+
+---
+
+### 3. Speedtest
+
+* **GET** `/nettools/speedtest`
+  Runs an internet speed test using `speedtest-cli`.
+
+**Response** (success):
+
+```json
+{
+  "success": true,
+  "output": [
+    "Ping: 15 ms",
+    "Download: 120.5 Mbit/s",
+    "Upload: 22.4 Mbit/s"
+  ]
+}
+```
+
+**Error Responses**:
+
+* Command failure → HTTP 500
+
+---
+
+### 4. DNS Lookup (nslookup)
+
+* **POST** `/nettools/nslookup`
+  Resolves an IP address or hostname using `nslookup`.
+
+**Request Body**:
+
+```json
+{
+  "devLastIP": "8.8.8.8"
+}
+```
+
+**Response** (success):
+
+```json
+{
+  "success": true,
+  "output": [
+    "Server: 8.8.8.8",
+    "Address: 8.8.8.8#53",
+    "Name: google-public-dns-a.google.com"
+  ]
+}
+```
+
+**Error Responses**:
+
+* Missing or invalid `devLastIP` → HTTP 400
+* Command failure → HTTP 500
+
+---
+
+### 5. Nmap Scan
+
+* **POST** `/nettools/nmap`
+  Runs an nmap scan on a target IP address or range.
+
+**Request Body**:
+
+```json
+{
+  "scan": "192.168.1.0/24",
+  "mode": "fast"
+}
+```
+
+**Supported Modes**:
+
+| Mode            | nmap Arguments |
+| --------------- | -------------- |
+| `fast`          | `-F`           |
+| `normal`        | default        |
+| `detail`        | `-A`           |
+| `skipdiscovery` | `-Pn`          |
+
+**Response** (success):
+
+```json
+{
+  "success": true,
+  "mode": "fast",
+  "ip": "192.168.1.0/24",
+  "output": [
+    "Starting Nmap 7.91",
+    "Host 192.168.1.1 is up",
+    "... scan results ..."
+  ]
+}
+```
+
+**Error Responses**:
+
+* Invalid IP → HTTP 400
+* Invalid mode → HTTP 400
+* Command failure → HTTP 500
+
+---
+
+### 6. Internet Connection Info
+
+* **GET** `/nettools/internetinfo`
+  Fetches public internet connection information using `ipinfo.io`.
+
+**Response** (success):
+
+```json
+{
+  "success": true,
+  "output": "IP: 203.0.113.5 City: Sydney Country: AU Org: Example ISP"
+}
+```
+
+**Error Responses**:
+
+* Failed request or empty response → HTTP 500
+
+---
+
+## Example `curl` Requests
+
+**Wake-on-LAN**:
+
+```sh
+curl -X POST "http://<server_ip>:<GRAPHQL_PORT>/nettools/wakeonlan" \
+  -H "Authorization: Bearer <API_TOKEN>" \
+  -H "Content-Type: application/json" \
+  --data '{"devMac":"AA:BB:CC:DD:EE:FF"}'
+```
+
+**Traceroute**:
+
+```sh
+curl -X POST "http://<server_ip>:<GRAPHQL_PORT>/nettools/traceroute" \
+  -H "Authorization: Bearer <API_TOKEN>" \
+  -H "Content-Type: application/json" \
+  --data '{"devLastIP":"192.168.1.1"}'
+```
+
+**Speedtest**:
+
+```sh
+curl "http://<server_ip>:<GRAPHQL_PORT>/nettools/speedtest" \
+  -H "Authorization: Bearer <API_TOKEN>"
+```
+
+**Nslookup**:
+
+```sh
+curl -X POST "http://<server_ip>:<GRAPHQL_PORT>/nettools/nslookup" \
+  -H "Authorization: Bearer <API_TOKEN>" \
+  -H "Content-Type: application/json" \
+  --data '{"devLastIP":"8.8.8.8"}'
+```
+
+**Nmap Scan**:
+
+```sh
+curl -X POST "http://<server_ip>:<GRAPHQL_PORT>/nettools/nmap" \
+  -H "Authorization: Bearer <API_TOKEN>" \
+  -H "Content-Type: application/json" \
+  --data '{"scan":"192.168.1.0/24","mode":"fast"}'
+```
+
+**Internet Info**:
+
+```sh
+curl "http://<server_ip>:<GRAPHQL_PORT>/nettools/internetinfo" \
+  -H "Authorization: Bearer <API_TOKEN>"
+```

docs/API_OLD.md

@@ -0,0 +1,370 @@
+# [Deprecated] API endpoints
+
+> [!WARNING] 
+> Some of these endpoints will be deprecated soon. Please refere to the new [API](API.md) endpoints docs for details on the new API layer. 
+
+NetAlertX comes with a couple of API endpoints. All requests need to be authorized (executed in a logged in browser session) or you have to pass the value of the `API_TOKEN` settings as authorization bearer, for example:
+
+```graphql
+curl 'http://host:GRAPHQL_PORT/graphql' \
+  -X POST \
+  -H 'Authorization: Bearer API_TOKEN' \
+  -H 'Content-Type: application/json' \
+  --data '{
+    "query": "query GetDevices($options: PageQueryOptionsInput) { devices(options: $options) { devices { rowid devMac devName devOwner devType devVendor devLastConnection devStatus } count } }",
+    "variables": {
+      "options": {
+        "page": 1,
+        "limit": 10,
+        "sort": [{ "field": "devName", "order": "asc" }],
+        "search": "",
+        "status": "connected"
+      }
+    }
+  }'
+```
+
+## API Endpoint: GraphQL
+
+- Endpoint URL: `php/server/query_graphql.php`
+- Host: `same as front end (web ui)`
+- Port: `20212` or as defined by the `GRAPHQL_PORT` setting
+
+### Example Query to Fetch Devices
+
+First, let's define the GraphQL query to fetch devices with pagination and sorting options.
+
+```graphql
+query GetDevices($options: PageQueryOptionsInput) {
+  devices(options: $options) {
+    devices {
+      rowid
+      devMac
+      devName
+      devOwner
+      devType
+      devVendor
+      devLastConnection
+      devStatus
+    }
+    count
+  }
+}
+```
+
+See also: [Debugging GraphQL issues](./DEBUG_GRAPHQL.md)
+
+### `curl` Command
+
+You can use the following `curl` command to execute the query. 
+
+```sh
+curl 'http://host:GRAPHQL_PORT/graphql'   -X POST   -H 'Authorization: Bearer API_TOKEN'  -H 'Content-Type: application/json'   --data '{
+    "query": "query GetDevices($options: PageQueryOptionsInput) { devices(options: $options) { devices { rowid devMac devName devOwner devType devVendor devLastConnection devStatus } count } }",
+    "variables": {
+      "options": {
+        "page": 1,
+        "limit": 10,
+        "sort": [{ "field": "devName", "order": "asc" }],
+        "search": "",
+        "status": "connected"
+      }
+    }
+  }'
+```
+
+### Explanation:
+
+1. **GraphQL Query**:
+   - The `query` parameter contains the GraphQL query as a string.
+   - The `variables` parameter contains the input variables for the query.
+
+2. **Query Variables**:
+   - `page`: Specifies the page number of results to fetch.
+   - `limit`: Specifies the number of results per page.
+   - `sort`: Specifies the sorting options, with `field` being the field to sort by and `order` being the sort order (`asc` for ascending or `desc` for descending).
+   - `search`: A search term to filter the devices.
+   - `status`: The status filter to apply (valid values are `my_devices` (determined by the `UI_MY_DEVICES` setting), `connected`, `favorites`, `new`, `down`, `archived`, `offline`).
+
+3. **`curl` Command**:
+   - The `-X POST` option specifies that we are making a POST request.
+   - The `-H "Content-Type: application/json"` option sets the content type of the request to JSON.
+   - The `-d` option provides the request payload, which includes the GraphQL query and variables.
+
+### Sample Response
+
+The response will be in JSON format, similar to the following:
+
+```json
+{
+  "data": {
+    "devices": {
+      "devices": [
+        {
+          "rowid": 1,
+          "devMac": "00:11:22:33:44:55",
+          "devName": "Device 1",
+          "devOwner": "Owner 1",
+          "devType": "Type 1",
+          "devVendor": "Vendor 1",
+          "devLastConnection": "2025-01-01T00:00:00Z",
+          "devStatus": "connected"
+        },
+        {
+          "rowid": 2,
+          "devMac": "66:77:88:99:AA:BB",
+          "devName": "Device 2",
+          "devOwner": "Owner 2",
+          "devType": "Type 2",
+          "devVendor": "Vendor 2",
+          "devLastConnection": "2025-01-02T00:00:00Z",
+          "devStatus": "connected"
+        }
+      ],
+      "count": 2
+    }
+  }
+}
+```
+
+## API Endpoint: JSON files 
+
+This API endpoint retrieves static files, that are periodically updated. 
+
+- Endpoint URL: `php/server/query_json.php?file=<file name>`
+- Host: `same as front end (web ui)`
+- Port: `20211` or as defined by the $PORT docker environment variable (same as the port for the web ui)
+
+### When are the endpoints updated
+
+The endpoints are updated when objects in the API endpoints are changed.
+
+### Location of the endpoints
+
+In the container, these files are located under the API directory (default: `/tmp/api/`, configurable via `NETALERTX_API` environment variable). You can access them via the `/php/server/query_json.php?file=user_notifications.json` endpoint.
+
+### Available endpoints
+
+You can access the following files:
+
+  | File name | Description | 
+  |----------------------|----------------------| 
+  | `notification_json_final.json` | The json version of the last notification (e.g. used for webhooks - [sample JSON](https://github.com/jokob-sk/NetAlertX/blob/main/front/report_templates/webhook_json_sample.json)). |
+  | `table_devices.json` | All of the available Devices detected by the app. |  
+  | `table_plugins_events.json` | The list of the unprocessed (pending) notification events (plugins_events DB table). |
+  | `table_plugins_history.json` | The list of notification events history. |  
+  | `table_plugins_objects.json` | The content of the plugins_objects table. Find more info on the [Plugin system here](https://github.com/jokob-sk/NetAlertX/tree/main/docs/PLUGINS.md)|
+  | `language_strings.json` | The content of the language_strings table, which in turn is loaded from the plugins `config.json` definitions. |  
+  | `table_custom_endpoint.json` | A custom endpoint generated by the SQL query specified by the `API_CUSTOM_SQL` setting. |
+  | `table_settings.json` | The content of the settings table. |
+  | `app_state.json` | Contains the current application state. |
+  
+
+### JSON Data format
+
+The endpoints starting with the `table_` prefix contain most, if not all, data contained in the corresponding database table. The common format for those is:
+
+```JSON
+{
+  "data": [
+        {
+          "db_column_name": "data",
+          "db_column_name2": "data2"      
+        }, 
+        {
+          "db_column_name": "data3",
+          "db_column_name2": "data4" 
+        }
+    ]
+}
+
+```
+
+Example JSON of the `table_devices.json` endpoint with two Devices (database rows):
+
+```JSON
+{
+  "data": [
+        {
+          "devMac": "Internet",
+          "devName": "Net - Huawei",
+          "devType": "Router",
+          "devVendor": null,
+          "devGroup": "Always on",
+          "devFirstConnection": "2021-01-01 00:00:00",
+          "devLastConnection": "2021-01-28 22:22:11",
+          "devLastIP": "192.168.1.24",
+          "devStaticIP": 0,
+          "devPresentLastScan": 1,
+          "devLastNotification": "2023-01-28 22:22:28.998715",
+          "devIsNew": 0,
+          "devParentMAC": "",
+          "devParentPort": "",
+          "devIcon": "globe"
+        }, 
+        {
+          "devMac": "a4:8f:ff:aa:ba:1f",
+          "devName": "Net - USG",
+          "devType": "Firewall",
+          "devVendor": "Ubiquiti Inc",
+          "devGroup": "",
+          "devFirstConnection": "2021-02-12 22:05:00",
+          "devLastConnection": "2021-07-17 15:40:00",
+          "devLastIP": "192.168.1.1",
+          "devStaticIP": 1,
+          "devPresentLastScan": 1,
+          "devLastNotification": "2021-07-17 15:40:10.667717",
+          "devIsNew": 0,
+          "devParentMAC": "Internet",
+          "devParentPort": 1,
+          "devIcon": "shield-halved"
+      }
+    ]
+}
+
+```
+
+## API Endpoint: Prometheus Exporter
+
+* **Endpoint URL**: `/metrics`
+* **Host**: (where NetAlertX exporter is running)
+* **Port**: as configured in the `GRAPHQL_PORT` setting (`20212` by default)
+
+---
+
+### Example Output of the `/metrics` Endpoint
+
+Below is a representative snippet of the metrics you may find when querying the `/metrics` endpoint for `netalertx`. It includes both aggregate counters and `device_status` labels per device.
+
+```
+netalertx_connected_devices 31
+netalertx_offline_devices 54
+netalertx_down_devices 0
+netalertx_new_devices 0
+netalertx_archived_devices 31
+netalertx_favorite_devices 2
+netalertx_my_devices 54
+
+netalertx_device_status{device="Net - Huawei", mac="Internet", ip="1111.111.111.111", vendor="None", first_connection="2021-01-01 00:00:00", last_connection="2025-08-04 17:57:00", dev_type="Router", device_status="Online"} 1
+netalertx_device_status{device="Net - USG", mac="74:ac:74:ac:74:ac", ip="192.168.1.1", vendor="Ubiquiti Networks Inc.", first_connection="2022-02-12 22:05:00", last_connection="2025-06-07 08:16:49", dev_type="Firewall", device_status="Archived"} 1
+netalertx_device_status{device="Raspberry Pi 4 LAN", mac="74:ac:74:ac:74:74", ip="192.168.1.9", vendor="Raspberry Pi Trading Ltd", first_connection="2022-02-12 22:05:00", last_connection="2025-08-04 17:57:00", dev_type="Singleboard Computer (SBC)", device_status="Online"} 1
+...
+```
+
+---
+
+### Metrics Explanation
+
+#### 1. Aggregate Device Counts
+
+Metric names prefixed with `netalertx_` provide aggregated counts by device status:
+
+* `netalertx_connected_devices`: number of devices currently connected
+* `netalertx_offline_devices`: devices currently offline
+* `netalertx_down_devices`: down/unreachable devices
+* `netalertx_new_devices`: devices recently detected
+* `netalertx_archived_devices`: archived devices
+* `netalertx_favorite_devices`: user-marked favorite devices
+* `netalertx_my_devices`: devices associated with the current user context
+
+These numeric values give a high-level overview of device distribution.
+
+#### 2. Per‑Device Status with Labels
+
+Each individual device is represented by a `netalertx_device_status` metric, with descriptive labels:
+
+* `device`: friendly name of the device
+* `mac`: MAC address (or placeholder)
+* `ip`: last recorded IP address
+* `vendor`: manufacturer or "None" if unknown
+* `first_connection`: timestamp when the device was first observed
+* `last_connection`: most recent contact timestamp
+* `dev_type`: device category or type
+* `device_status`: current status (Online / Offline / Archived / Down / ...)
+
+The metric value is always `1` (indicating presence or active state) and the combination of labels identifies the device.
+
+---
+
+### How to Query with `curl`
+
+To fetch the metrics from the NetAlertX exporter:
+
+```sh
+curl 'http://<server_ip>:<GRAPHQL_PORT>/metrics' \
+  -H 'Authorization: Bearer <API_TOKEN>' \
+  -H 'Accept: text/plain'
+```
+
+Replace:
+
+* `<server_ip>`: IP or hostname of the NetAlertX server
+* `<GRAPHQL_PORT>`: port specified in your `GRAPHQL_PORT` setting  (default: `20212`)
+* `<API_TOKEN>` your Bearer token from the `API_TOKEN` setting
+
+---
+
+### Summary
+
+* **Endpoint**: `/metrics` provides both summary counters and per-device status entries.
+* **Aggregate metrics** help monitor overall device states.
+* **Detailed metrics** expose each device’s metadata via labels.
+* **Use case**: feed into Prometheus for scraping, monitoring, alerting, or charting dashboard views.
+
+### Prometheus Scraping Configuration
+
+```yaml
+scrape_configs:
+  - job_name: 'netalertx'
+    metrics_path: /metrics
+    scheme: http
+    scrape_interval: 60s
+    static_configs:
+      - targets: ['<server_ip>:<GRAPHQL_PORT>']
+    authorization:
+      type: Bearer
+      credentials: <API_TOKEN>
+```
+
+### Grafana template
+
+Grafana template sample: [Download json](./samples/API/Grafana_Dashboard.json)
+
+## API Endpoint: /log files
+
+This API endpoint retrieves files from the `/tmp/log` folder. 
+
+- Endpoint URL: `php/server/query_logs.php?file=<file name>`
+- Host: `same as front end (web ui)`
+- Port: `20211` or as defined by the $PORT docker environment variable (same as the port for the web ui)
+
+| File                     | Description                                                   |
+|--------------------------|---------------------------------------------------------------|
+| `IP_changes.log`         | Logs of IP address changes                                    |
+| `app.log`                | Main application log                                          |
+| `app.php_errors.log`     | PHP error log                                                 |
+| `app_front.log`          | Frontend application log                                      |
+| `app_nmap.log`           | Logs of Nmap scan results                                     |
+| `db_is_locked.log`       | Logs when the database is locked                              |
+| `execution_queue.log`    | Logs of execution queue activities                            |
+| `plugins/`               | Directory for temporary plugin-related files (not accessible) |
+| `report_output.html`     | HTML report output                                            |
+| `report_output.json`     | JSON format report output                                     |
+| `report_output.txt`      | Text format report output                                     |
+| `stderr.log`             | Logs of standard error output                                 |
+| `stdout.log`             | Logs of standard output                                       |
+
+
+## API Endpoint: /config files
+
+To retrieve files from the `/data/config` folder. 
+
+- Endpoint URL: `php/server/query_config.php?file=<file name>`
+- Host: `same as front end (web ui)`
+- Port: `20211` or as defined by the $PORT docker environment variable (same as the port for the web ui)
+
+| File                     | Description                                      |
+|--------------------------|--------------------------------------------------|
+| `devices.csv`            | Devices csv file                                 |
+| `app.conf`               | Application config file                          |
+

docs/API_ONLINEHISTORY.md

@@ -0,0 +1,32 @@
+# Online History API Endpoints
+
+Manage the **online history records** of devices. Currently, the API supports deletion of all history entries. All endpoints require **authorization**.
+
+---
+
+## 1. Delete Online History
+
+* **DELETE** `/history`
+  Remove **all records** from the online history table (`Online_History`). This operation **cannot be undone**.
+
+**Response** (success):
+
+```json
+{
+  "success": true,
+  "message": "Deleted online history"
+}
+```
+
+**Error Responses**:
+
+* Unauthorized → HTTP 403
+
+---
+
+### Example `curl` Request
+
+```bash
+curl -X DELETE "http://<server_ip>:<GRAPHQL_PORT>/history" \
+  -H "Authorization: Bearer <API_TOKEN>"
+```

docs/API_SESSIONS.md

@@ -0,0 +1,240 @@
+# Sessions API Endpoints
+
+Track and manage device connection sessions. Sessions record when a device connects or disconnects on the network.
+
+### Create a Session
+
+* **POST** `/sessions/create` → Create a new session for a device
+
+  **Request Body:**
+
+  ```json
+  {
+    "mac": "AA:BB:CC:DD:EE:FF",
+    "ip": "192.168.1.10",
+    "start_time": "2025-08-01T10:00:00",
+    "end_time": "2025-08-01T12:00:00",      // optional
+    "event_type_conn": "Connected",         // optional, default "Connected"
+    "event_type_disc": "Disconnected"       // optional, default "Disconnected"
+  }
+  ```
+
+  **Response:**
+
+  ```json
+  {
+    "success": true,
+    "message": "Session created for MAC AA:BB:CC:DD:EE:FF"
+  }
+  ```
+
+#### `curl` Example
+
+```bash
+curl -X POST "http://<server_ip>:<GRAPHQL_PORT>/sessions/create" \
+  -H "Authorization: Bearer <API_TOKEN>" \
+  -H "Accept: application/json" \
+  -H "Content-Type: application/json" \
+  -d '{
+    "mac": "AA:BB:CC:DD:EE:FF",
+    "ip": "192.168.1.10",
+    "start_time": "2025-08-01T10:00:00",
+    "end_time": "2025-08-01T12:00:00",
+    "event_type_conn": "Connected",
+    "event_type_disc": "Disconnected"
+  }'
+
+```
+
+---
+
+### Delete Sessions
+
+* **DELETE** `/sessions/delete` → Delete all sessions for a given MAC
+
+  **Request Body:**
+
+  ```json
+  {
+    "mac": "AA:BB:CC:DD:EE:FF"
+  }
+  ```
+
+  **Response:**
+
+  ```json
+  {
+    "success": true,
+    "message": "Deleted sessions for MAC AA:BB:CC:DD:EE:FF"
+  }
+  ```
+
+#### `curl` Example
+
+```bash
+curl -X DELETE "http://<server_ip>:<GRAPHQL_PORT>/sessions/delete" \
+  -H "Authorization: Bearer <API_TOKEN>" \
+  -H "Accept: application/json" \
+  -H "Content-Type: application/json" \
+  -d '{
+    "mac": "AA:BB:CC:DD:EE:FF"
+  }'
+```
+
+---
+
+### List Sessions
+
+* **GET** `/sessions/list` → Retrieve sessions optionally filtered by device and date range
+
+  **Query Parameters:**
+
+  * `mac` (optional) → Filter by device MAC address
+  * `start_date` (optional) → Filter sessions starting from this date (`YYYY-MM-DD`)
+  * `end_date` (optional) → Filter sessions ending by this date (`YYYY-MM-DD`)
+
+  **Example:**
+
+  ```
+  /sessions/list?mac=AA:BB:CC:DD:EE:FF&start_date=2025-08-01&end_date=2025-08-21
+  ```
+
+  **Response:**
+
+  ```json
+  {
+    "success": true,
+    "sessions": [
+      {
+        "ses_MAC": "AA:BB:CC:DD:EE:FF",
+        "ses_Connection": "2025-08-01 10:00",
+        "ses_Disconnection": "2025-08-01 12:00",
+        "ses_Duration": "2h 0m",
+        "ses_IP": "192.168.1.10",
+        "ses_Info": ""
+      }
+    ]
+  }
+  ```
+#### `curl` Example
+
+```bash
+curl -X GET "http://<server_ip>:<GRAPHQL_PORT>/sessions/list?mac=AA:BB:CC:DD:EE:FF&start_date=2025-08-01&end_date=2025-08-21" \
+  -H "Authorization: Bearer <API_TOKEN>" \
+  -H "Accept: application/json"
+```
+---
+
+### Calendar View of Sessions
+
+* **GET** `/sessions/calendar` → View sessions in calendar format
+
+  **Query Parameters:**
+
+  * `start` → Start date (`YYYY-MM-DD`)
+  * `end` → End date (`YYYY-MM-DD`)
+
+  **Example:**
+
+  ```
+  /sessions/calendar?start=2025-08-01&end=2025-08-21
+  ```
+
+  **Response:**
+
+  ```json
+  {
+    "success": true,
+    "sessions": [
+      {
+        "resourceId": "AA:BB:CC:DD:EE:FF",
+        "title": "",
+        "start": "2025-08-01T10:00:00",
+        "end": "2025-08-01T12:00:00",
+        "color": "#00a659",
+        "tooltip": "Connection: 2025-08-01 10:00\nDisconnection: 2025-08-01 12:00\nIP: 192.168.1.10",
+        "className": "no-border"
+      }
+    ]
+  }
+  ```
+
+#### `curl` Example
+
+```bash
+curl -X GET "http://<server_ip>:<GRAPHQL_PORT>/sessions/calendar?start=2025-08-01&end=2025-08-21" \
+  -H "Authorization: Bearer <API_TOKEN>" \
+  -H "Accept: application/json"
+```
+
+---
+
+### Device Sessions
+
+* **GET** `/sessions/<mac>` → Retrieve sessions for a specific device
+
+  **Query Parameters:**
+
+  * `period` → Period to retrieve sessions (`1 day`, `7 days`, `1 month`, etc.)
+    Default: `1 day`
+
+  **Example:**
+
+  ```
+  /sessions/AA:BB:CC:DD:EE:FF?period=7 days
+  ```
+
+  **Response:**
+
+  ```json
+  {
+    "success": true,
+    "sessions": [
+      {
+        "ses_MAC": "AA:BB:CC:DD:EE:FF",
+        "ses_Connection": "2025-08-01 10:00",
+        "ses_Disconnection": "2025-08-01 12:00",
+        "ses_Duration": "2h 0m",
+        "ses_IP": "192.168.1.10",
+        "ses_Info": ""
+      }
+    ]
+  }
+  ```
+
+#### `curl` Example
+
+```bash
+curl -X GET "http://<server_ip>:<GRAPHQL_PORT>/sessions/AA:BB:CC:DD:EE:FF?period=7%20days" \
+  -H "Authorization: Bearer <API_TOKEN>" \
+  -H "Accept: application/json"
+```
+
+---
+
+### Session Events Summary
+
+* **GET** `/sessions/session-events` → Retrieve a summary of session events
+
+  **Query Parameters:**
+
+  * `type` → Event type (`all`, `sessions`, `missing`, `voided`, `new`, `down`)
+    Default: `all`
+  * `period` → Period to retrieve events (`7 days`, `1 month`, etc.)
+
+  **Example:**
+
+  ```
+  /sessions/session-events?type=all&period=7 days
+  ```
+
+  **Response:**
+  Returns a list of events or sessions with formatted connection, disconnection, duration, and IP information.
+
+#### `curl` Example
+
+```bash
+curl -X GET "http://<server_ip>:<GRAPHQL_PORT>/sessions/session-events?type=all&period=7%20days" \
+  -H "Authorization: Bearer <API_TOKEN>" \
+  -H "Accept: application/json"
+```

docs/API_SETTINGS.md

@@ -0,0 +1,92 @@
+# Settings API Endpoints
+
+Retrieve application settings stored in the configuration system. This endpoint is useful for quickly fetching individual settings such as `API_TOKEN` or `TIMEZONE`.
+
+For bulk or structured access (all settings, schema details, or filtering), use the [GraphQL API Endpoint](API_GRAPHQL.md).
+
+---
+
+### Get a Setting
+
+* **GET** `/settings/<key>` → Retrieve the value of a specific setting
+
+**Path Parameter:**
+
+* `key` → The setting key to retrieve (e.g., `API_TOKEN`, `TIMEZONE`)
+
+**Authorization:**
+Requires a valid API token in the `Authorization` header.
+
+---
+
+#### `curl` Example (Success)
+
+```sh
+curl 'http://<server_ip>:<GRAPHQL_PORT>/settings/API_TOKEN' \
+  -H 'Authorization: Bearer <API_TOKEN>' \
+  -H 'Accept: application/json'
+```
+
+**Response:**
+
+```json
+{
+  "success": true,
+  "value": "my-secret-token"
+}
+```
+
+---
+
+#### `curl` Example (Invalid Key)
+
+```sh
+curl 'http://<server_ip>:<GRAPHQL_PORT>/settings/DOES_NOT_EXIST' \
+  -H 'Authorization: Bearer <API_TOKEN>' \
+  -H 'Accept: application/json'
+```
+
+**Response:**
+
+```json
+{
+  "success": true,
+  "value": null
+}
+```
+
+---
+
+#### `curl` Example (Unauthorized)
+
+```sh
+curl 'http://<server_ip>:<GRAPHQL_PORT>/settings/API_TOKEN' \
+  -H 'Accept: application/json'
+```
+
+**Response:**
+
+```json
+{
+  "error": "Forbidden"
+}
+```
+
+---
+
+### Notes
+
+* This endpoint is optimized for **direct retrieval of a single setting**.
+* For **complex retrieval scenarios** (listing all settings, retrieving schema metadata like `setName`, `setDescription`, `setType`, or checking if a setting is overridden by environment variables), use the **GraphQL Settings Query**:
+
+```sh
+curl 'http://<server_ip>:<GRAPHQL_PORT>/graphql' \
+  -X POST \
+  -H 'Authorization: Bearer <API_TOKEN>' \
+  -H 'Content-Type: application/json' \
+  --data '{
+    "query": "query GetSettings { settings { settings { setKey setName setDescription setType setOptions setGroup setValue setEvents setOverriddenByEnv } count } }"
+  }'
+```
+
+See the [GraphQL API Endpoint](API_GRAPHQL.md) for more details.

docs/API_SYNC.md

@@ -0,0 +1,125 @@
+# Sync API Endpoint 
+
+---
+
+The `/sync` endpoint is used by the **SYNC plugin** to synchronize data between multiple NetAlertX instances (e.g., from a node to a hub). It supports both **GET** and **POST** requests.
+
+#### 9.1 GET `/sync`
+
+Fetches data from a node to the hub. The data is returned as a **base64-encoded JSON file**.
+
+**Example Request:**
+
+```sh
+curl 'http://<server>:<GRAPHQL_PORT>/sync' \
+  -H 'Authorization: Bearer <API_TOKEN>'
+```
+
+**Response Example:**
+
+```json
+{
+  "node_name": "NODE-01",
+  "status": 200,
+  "message": "OK",
+  "data_base64": "eyJkZXZpY2VzIjogW3siZGV2TWFjIjogIjAwOjExOjIyOjMzOjQ0OjU1IiwiZGV2TmFtZSI6ICJEZXZpY2UgMSJ9XSwgImNvdW50Ijog1fQ==",
+  "timestamp": "2025-08-24T10:15:00+10:00"
+}
+```
+
+**Notes:**
+
+* `data_base64` contains the full JSON data encoded in Base64.
+* `node_name` corresponds to the `SYNC_node_name` setting on the node.
+* Errors (e.g., missing file) return HTTP 500 with an error message.
+
+---
+
+#### 9.2 POST `/sync` 
+
+The **POST** endpoint is used by nodes to **send data to the hub**. The hub expects the data as **form-encoded fields** (application/x-www-form-urlencoded or multipart/form-data). The hub then stores the data in the plugin log folder for processing.
+
+#### Required Fields
+
+| Field       | Type              | Description                                                                                                                                                                  |
+| ----------- | ----------------- | ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
+| `data`      | string            | The payload from the plugin or devices. Typically **plain text**, **JSON**, or **encrypted Base64** data. In your Python script, `encrypt_data()` is applied before sending. |
+| `node_name` | string            | The name of the node sending the data. Matches the node’s `SYNC_node_name` setting. Used to generate the filename on the hub.                                                |
+| `plugin`    | string            | The name of the plugin sending the data. Determines the filename prefix (`last_result.<plugin>...`).                                                                         |
+| `file_path` | string (optional) | Path of the local file being sent. Used only for logging/debugging purposes on the hub; **not required for processing**.                                                     |
+
+---
+
+### How the Hub Processes the POST Data
+
+1. **Receives the data** and validates the API token.
+2. **Stores the raw payload** in:
+
+```
+INSTALL_PATH/log/plugins/last_result.<plugin>.encoded.<node_name>.<sequence>.log
+```
+
+* `<plugin>` → plugin name from the POST request.
+* `<node_name>` → node name from the POST request.
+* `<sequence>` → incremented number for each submission.
+
+3. **Decodes / decrypts the data** if necessary (Base64 or encrypted) before processing.
+4. **Processes JSON payloads** (e.g., device info) to:
+
+   * Avoid duplicates by tracking `devMac`.
+   * Add metadata like `devSyncHubNode`.
+   * Insert new devices into the database.
+5. **Renames files** to indicate they have been processed:
+
+```
+processed_last_result.<plugin>.<node_name>.<sequence>.log
+```
+
+---
+
+### Example POST Payload
+
+If a node is sending device data:
+
+```bash
+curl -X POST 'http://<hub>:<PORT>/sync' \
+  -H 'Authorization: Bearer <API_TOKEN>' \
+  -F 'data={"data":[{"devMac":"00:11:22:33:44:55","devName":"Device 1","devVendor":"Vendor A","devLastIP":"192.168.1.10"}]}' \
+  -F 'node_name=NODE-01' \
+  -F 'plugin=SYNC'
+```
+
+* The `data` field contains JSON with a **`data` array**, where each element is a **device object** or **plugin data object**.
+* The `plugin` and `node_name` fields allow the hub to **organize and store the file correctly**.
+* The data is only processed if the relevant plugins are enabled and run on the target server. 
+
+---
+
+### Key Notes
+
+* **Always use the same `plugin` and `node_name` values** for consistent storage.
+* **Encrypted data**: The Python script uses `encrypt_data()` before sending, and the hub decodes it before processing.
+* **Sequence numbers**: Every submission generates a new sequence, preventing overwriting previous data.
+* **Form-encoded**: The hub expects `multipart/form-data` (cURL `-F`) or `application/x-www-form-urlencoded`.
+
+**Storage Details:**
+
+* Data is stored under `INSTALL_PATH/log/plugins` with filenames following the pattern:
+
+```
+last_result.<plugin>.encoded.<node_name>.<sequence>.log
+```
+
+* Both encoded and decoded files are tracked, and new submissions increment the sequence number.
+* If storing fails, the API returns HTTP 500 with an error message.
+* The data is only processed if the relevant plugins are enabled and run on the target server. 
+
+---
+
+#### 9.3 Notes and Best Practices
+
+* **Authorization Required** – Both GET and POST require a valid API token.
+* **Data Integrity** – Ensure that `node_name` and `plugin` are consistent to avoid overwriting files.
+* **Monitoring** – Notifications are generated whenever data is sent or received (`write_notification`), which can be used for alerting or auditing.
+* **Use Case** – Typically used in multi-node deployments to consolidate device and event data on a central hub.
+

docs/API_TESTS.md

@@ -0,0 +1,12 @@
+### Unit Tests
+
+>[!WARNING]
+> Please note these test modify data in the database. 
+
+1. See the `/test` directory for available test cases. These are not exhaustive but cover the main API endpoints.  
+2. To run a test case, SSH into the container:  
+   `sudo docker exec -it netalertx /bin/bash`  
+3. Inside the container, install pytest (if not already installed):  
+   `pip install pytest`  
+4. Run a specific test case:  
+   `pytest /app/test/TESTFILE.py`

docs/BACKUPS.md

@@ -1,87 +1,162 @@
-# Backing things up
+# Backing Things Up
 
 > [!NOTE]
-> To backup 99% of your configuration backup at least the `/app/config` folder. Please read the whole page (or at least "Scenario 2: Corrupted database") for details.
-> Note that database definitions might change over time. The safest way is to restore your older backups into the **same version** of the app they were taken from and then gradually upgarde between releases to the latest version.
+> To back up 99% of your configuration, back up at least the `/data/config` folder.
+> Database definitions can change between releases, so the safest method is to restore backups using the **same app version** they were taken from, then upgrade incrementally.
 
-There are 3 artifacts that can be used to backup the application:
+---
+
+## What to Back Up
+
+There are four key artifacts you can use to back up your NetAlertX configuration:
 
 | File                     | Description                         | Limitations                                                                                                                                          |
-|-----------------------|-------------------------------|-------------------------------|
-| `/db/app.db`       | Database file(s)  | The database file might be in an uncommitted state or corrupted |
-| `/config/app.conf` | Configuration file |  Can be overridden with the [`APP_CONF_OVERRIDE` env variable](https://github.com/jokob-sk/NetAlertX/tree/main/dockerfiles#docker-environment-variables).  |
-| `/config/devices.csv`  | CSV file containing device information |     Doesn't contain historical data        |
+| ------------------------ | ----------------------------------- | ---------------------------------------------------------------------------------------------------------------------------------------------------- |
+| `/db/app.db`             | The application database            | Might be in an uncommitted state or corrupted                                                                                                        |
+| `/config/app.conf`       | Configuration file                  | Can be overridden using the [`APP_CONF_OVERRIDE`](https://github.com/jokob-sk/NetAlertX/tree/main/dockerfiles#docker-environment-variables) variable |
+| `/config/devices.csv`    | CSV file containing device data     | Does not include historical data                                                                                                                     |
+| `/config/workflows.json` | JSON file containing your workflows | N/A                                                                                                                                                  |
 
+---
 
-## Backup strategies
+## Where the Data Lives
 
-The safest approach to backups is to backup everything, by taking regular file system backups (I use [Kopia](https://github.com/kopia/kopia)). 
-
-Arguably, the most time is spent setting up the device list, so if only one file is kept I'd recommend to have a latest backup of the `devices_<timestamp>.csv` or `devices.csv` file, followed by the `app.conf` file. You can also download `app.conf` and `devices.csv` file in the Maintenance section:
-
-![Backup and Restore Section in Maintenance](./img/BACKUPS/Maintenance_Backup_Restore.png)
-
-### Scenario 1: Full backup
-
-End-result: Full restore
-
-#### 💾 Source artifacts:
-
-- `/app/db/app.db` (uncorrupted)
-- `/app/config/app.conf`
-
-#### 📥 Recovery:
-
-To restore the application map the above files as described in the [Setup documentation](https://github.com/jokob-sk/NetAlertX/blob/main/dockerfiles/README.md#docker-paths). 
-
-
-### Scenario 2: Corrupted database
-
-End-result: Partial restore (historical data and some plugin data will be missing)
-
-#### 💾 Source artifacts:
-
-- `/app/config/app.conf`
-- `/app/config/devices_<timestamp>.csv` or `/app/config/devices.csv`
-
-#### 📥 Recovery:
-
-Even with a corrupted database you can recover what I would argue is 99% of the configuration. 
-
-- upload the `app.conf` file into the mounted `/app/config/` folder as described in the [Setup documentation](https://github.com/jokob-sk/NetAlertX/blob/main/dockerfiles/README.md#docker-paths).
-- rename the `devices_<timestamp>.csv` to `devices.csv` and place it in the `/app/config` folder
-- Restore the `devices.csv` backup via the [Maintenance section](./DEVICES_BULK_EDITING.md)
-
-## Data and backup storage
-
-To decide on a backup strategy, check where the data is stored:
+Understanding where your data is stored helps you plan your backup strategy.
 
 ### Core Configuration
 
-The core application configuration is in the `app.conf` file (See [Settings System](./SETTINGS_SYSTEM.md) for details), such as:
+Stored in `/data/config/app.conf`.
+This includes settings for:
 
-- Notification settings
-- Scanner settings
-- Scheduled maintenance settings
-- UI configuration
+* Notifications
+* Scanning
+* Scheduled maintenance
+* UI preferences
 
-### Core Device Data
+(See [Settings System](./SETTINGS_SYSTEM.md) for details.)
 
-The core device data is backed up to the `devices_<timestamp>.csv` or `devices.csv` file via the [CSV Backup `CSVBCKP` Plugin](https://github.com/jokob-sk/NetAlertX/tree/main/front/plugins/csv_backup). This file contains data, such as:
+### Device Data
 
-- Device names
-- Device icons
-- Device network configuration
-- Device categorization 
-- Device custom properties data
+Stored in `/data/config/devices_<timestamp>.csv` or `/data/config/devices.csv`, created by the [CSV Backup `CSVBCKP` Plugin](https://github.com/jokob-sk/NetAlertX/tree/main/front/plugins/csv_backup).
+Contains:
 
-### Historical data
+* Device names, icons, and categories
+* Network configuration
+* Custom properties
 
-Historical data is stored in the `app.db` database (See [Database overview](./DATABASE.md) for details). This data includes:
+### Historical Data
 
-- Plugin objects
-- Plugin historical entries
-- History of Events, Notifications, Workflow Events
-- Presence history
+Stored in `/data/db/app.db` (see [Database Overview](./DATABASE.md)).
+Contains:
 
+* Plugin data and historical entries
+* Event and notification history
+* Device presence history
 
+---
+
+## Backup Strategies
+
+The safest approach is to back up **both** the `/db` and `/config` folders regularly. Tools like [Kopia](https://github.com/kopia/kopia) make this simple and efficient.
+
+If you can only keep a few files, prioritize:
+
+1. The latest `devices_<timestamp>.csv` or `devices.csv`
+2. `app.conf`
+3. `workflows.json`
+
+You can also download the `app.conf` and `devices.csv` files from the **Maintenance** section:
+
+![Backup and Restore Section in Maintenance](./img/BACKUPS/Maintenance_Backup_Restore.png)
+
+---
+
+## Scenario 1: Full Backup and Restore
+
+**Goal:** Full recovery of your configuration and data.
+
+### 💾 What to Back Up
+
+* `/data/db/app.db` (uncorrupted)
+* `/data/config/app.conf`
+* `/data/config/workflows.json`
+
+### 📥 How to Restore
+
+Map these files into your container as described in the [Setup documentation](./DOCKER_INSTALLATION.md).
+
+---
+
+## Scenario 2: Corrupted Database
+
+**Goal:** Recover configuration and device data when the database is lost or corrupted.
+
+### 💾 What to Back Up
+
+* `/data/config/app.conf`
+* `/data/config/workflows.json`
+* `/data/config/devices_<timestamp>.csv` (rename to `devices.csv` during restore)
+
+### 📥 How to Restore
+
+1. Copy `app.conf` and `workflows.json` into `/data/config/`
+2. Rename and place `devices_<timestamp>.csv` → `/data/config/devices.csv`
+3. Restore via the **Maintenance** section under *Devices → Bulk Editing*
+
+This recovers nearly all configuration, workflows, and device metadata.
+
+---
+
+## Docker-Based Backup and Restore
+
+For users running NetAlertX via Docker, you can back up or restore directly from your host system — a convenient and scriptable option.
+
+### Full Backup (File-Level)
+
+1. **Stop the container:**
+
+   ```bash
+   docker stop netalertx
+   ```
+
+2. **Create a compressed archive** of your configuration and database volumes:
+
+   ```bash
+   docker run --rm -v local_path/config:/config -v local_path/db:/db alpine tar -cz /config /db > netalertx-backup.tar.gz
+   ```
+
+3. **Restart the container:**
+
+   ```bash
+   docker start netalertx
+   ```
+
+### Restore from Backup
+
+1. **Stop the container:**
+
+   ```bash
+   docker stop netalertx
+   ```
+
+2. **Restore from your backup file:**
+
+   ```bash
+   docker run --rm -i -v local_path/config:/config -v local_path/db:/db alpine tar -C / -xz < netalertx-backup.tar.gz
+   ```
+
+3. **Restart the container:**
+
+   ```bash
+   docker start netalertx
+   ```
+
+> This approach uses a temporary, minimal `alpine` container to access Docker-managed volumes. The `tar` command creates or extracts an archive directly from your host’s filesystem, making it fast, clean, and reliable for both automation and manual recovery.
+
+---
+
+## Summary
+
+* Back up `/data/config` for configuration and devices; `/data/db` for history
+* Keep regular backups, especially before upgrades
+* For Docker setups, use the lightweight `alpine`-based backup method for consistency and portability

docs/BUILDS.md

@@ -0,0 +1,82 @@
+# NetAlertX Builds: Choose Your Path
+
+NetAlertX provides different installation methods for different needs. This guide helps you choose the right path for security, experimentation, or development.
+
+## 1. Hardened Appliance (Default Production)
+
+> [!NOTE]
+> Use this image if: You want to use NetAlertX securely.
+
+### Who is this for?
+
+All users who want a stable, secure, "set-it-and-forget-it" appliance.
+
+### Methodology
+
+- Multi-stage Alpine build
+- Aggressively "amputated"
+- Locked down for max security
+
+### Source
+
+`Dockerfile (hardened target)`
+
+## 2. "Tinkerer's" Image (Insecure VM-Style)
+
+> [!NOTE]
+> Use this image if: You want to experiment with NetAlertX.
+
+### Who is this for?
+
+Power users, developers, and "tinkerers" wanting a familiar "VM-like" experience.
+
+### Methodology
+
+- Traditional Debian build
+- Includes full un-hardened OS
+- Contains `apt`, `sudo`, `git`
+
+### Source
+
+`Dockerfile.debian`
+
+## 3. Contributor's Devcontainer (Project Developers)
+
+> [!NOTE]
+> Use this image if: You want to develop NetAlertX itself.
+
+### Who is this for?
+
+Project contributors who are actively writing and debugging code for NetAlertX.
+
+### Methodology
+
+
+- Builds `FROM runner` stage
+- Loaded by VS Code
+- Full debug tools: `xdebug`, `pytest`
+
+
+### Source
+
+`Dockerfile (devcontainer target)`
+
+# Visualizing the Trade-Offs
+
+This chart compares the three builds across key attributes. A higher score means "more of" that attribute. Notice the clear trade-offs between security and development features.
+
+![tradeoffs](./img/BUILDS/build_images_options_tradeoffs.png)
+
+
+# Build Process & Origins
+
+The final images originate from two different files and build paths. The main `Dockerfile` uses stages to create *both* the hardened and development container images.
+
+## Official Build Path
+
+Dockerfile -> builder (Stage 1) -> runner (Stage 2) ->  hardened (Final Stage) (Production Image) + devcontainer (Final Stage) (Developer Image)
+
+
+## Legacy Build Path
+
+Dockerfile.debian -> "Tinkerer's" Image (Insecure VM-Style Image)

docs/COMMON_ISSUES.md

@@ -14,9 +14,9 @@ The app uses the MAC address as an unique identifier for devices. If a new MAC i
 
 Make sure you [File permissions](./FILE_PERMISSIONS.md) are set correctly.
 
-* If facing issues (AJAX errors, can't write to DB, empty screen, etc,) make sure permissions are set correctly, and check the logs under `/app/log`. 
-* To solve permission issues you can try setting the owner and group of the `app.db` by executing the following on the host system: `docker exec netalertx chown -R www-data:www-data /app/db/app.db`. 
-* If still facing issues, try to map the app.db file (⚠ not folder) to `:/app/db/app.db` (see [docker-compose Examples](https://github.com/jokob-sk/NetAlertX/blob/main/dockerfiles/README.md#-docker-composeyml-examples) for details)
+* If facing issues (AJAX errors, can't write to DB, empty screen, etc,) make sure permissions are set correctly, and check the logs under `/tmp/log`. 
+* To solve permission issues you can try setting the owner and group of the `app.db` by executing the following on the host system: `docker exec netalertx chown -R www-data:www-data /data/db/app.db`. 
+* If still facing issues, try to map the app.db file (⚠ not folder) to `:/data/db/app.db` (see [docker-compose Examples](https://github.com/jokob-sk/NetAlertX/blob/main/dockerfiles/README.md#-docker-composeyml-examples) for details)
 
 ### Container restarts / crashes
 
@@ -49,7 +49,7 @@ Make sure that the subnet and interface in `SCAN_SUBNETS` are correct. If your d
 
 ### Losing my settings and devices after an update
 
-If you lose your devices and/or settings after an update that means you don't have the `/app/db` and `/app/config` folders mapped to a permanent storage. That means every time you update these folders are re-created. Make sure you have the [volumes specified correctly](./DOCKER_COMPOSE.md) in your `docker-compose.yml` or run command.
+If you lose your devices and/or settings after an update that means you don't have the `/data/db` and `/data/config` folders mapped to a permanent storage. That means every time you update these folders are re-created. Make sure you have the [volumes specified correctly](./DOCKER_COMPOSE.md) in your `docker-compose.yml` or run command.
 
 
 ### The application is slow

docs/COMMUNITY_GUIDES.md

@@ -2,6 +2,7 @@
 
 Use the official installation guides at first and use community content as supplementary material. Open an issue or PR if you'd like to add your link to the list 🙏 (Ordered by last update time)
 
+- ▶ [Discover & Monitor Your Network with This Self-Hosted Open Source Tool - Lawrence Systems](https://www.youtube.com/watch?v=R3b5cxLZMpo) (June 2025)
 - ▶ [Home Lab Network Monitoring - Scotti-BYTE Enterprise Consulting Services](https://www.youtube.com/watch?v=0DryhzrQSJA) (July 2024)
 - 📄 [How to Install NetAlertX on Your Synology NAS - Marius hosting](https://mariushosting.com/how-to-install-pi-alert-on-your-synology-nas/) (Updated frequently)
 - 📄 [Using the PiAlert Network Security Scanner on a Raspberry Pi - PiMyLifeUp](https://pimylifeup.com/raspberry-pi-pialert/)

docs/CUSTOM_PROPERTIES.md

@@ -4,7 +4,7 @@
 
 ## Overview
 
-This functionality allows you to define **custom properties** for devices, which can store and display additional information on the device listing page. By marking properties as visible, you can enhance the user interface with quick actions, notes, or external links.
+This functionality allows you to define **custom properties** for devices, which can store and display additional information on the device listing page. By marking properties as "Show", you can enhance the user interface with quick actions, notes, or external links.
 
 ### Key Features:
 - **Customizable Properties**: Define specific properties for each device.
@@ -63,10 +63,10 @@ Visible properties (`CUSTPROP_show: true`) are displayed as interactive icons in
 
 ---
 
-## Example Scenarios
+## Example Use Cases
 
 1. **Device Documentation Link**:
-   - Add a custom property with `CUSTPROP_type` set to `link` or `link_new_tab` to allow quick navigation to the documentation.
+   - Add a custom property with `CUSTPROP_type` set to `link` or `link_new_tab` to allow quick navigation to the external documentation of the device.
 
 2. **Firmware Details**:
    - Use `CUSTPROP_type: show_notes` to display firmware versions or upgrade instructions in a modal.

docs/DATABASE.md

@@ -1,11 +1,56 @@
   
 # A high-level description of the database structure
 
-  ⚠ Disclaimer: As I'm not the original author, some of the information might be inaccurate. Feel free to submit a PR to correct anything within this page or documentation in general. 
+ An overview of the most important database tables as well as an detailed overview of the Devices table. The MAC address is used as a foreign key in most cases. 
 
-  The MAC address is used as a foreign key in most cases. 
+## Devices database table
 
-## 🔍Tables overview
+| Field Name              | Description | Sample Value |
+|-------------------------|-------------|--------------|
+| `devMac`               | MAC address of the device. | `00:1A:2B:3C:4D:5E` |
+| `devName`              | Name of the device. | `iPhone 12` |
+| `devOwner`             | Owner of the device. | `John Doe` |
+| `devType`              | Type of the device (e.g., phone, laptop, etc.). If set to a network type (e.g., switch), it will become selectable as a Network Parent Node. | `Laptop` |
+| `devVendor`            | Vendor/manufacturer of the device. | `Apple` |
+| `devFavorite`          | Whether the device is marked as a favorite. | `1` |
+| `devGroup`             | Group the device belongs to. | `Home Devices` |
+| `devComments`          | User comments or notes about the device. | `Used for work purposes` |
+| `devFirstConnection`   | Timestamp of the device's first connection. | `2025-03-22 12:07:26+11:00` |
+| `devLastConnection`    | Timestamp of the device's last connection. | `2025-03-22 12:07:26+11:00` |
+| `devLastIP`            | Last known IP address of the device. | `192.168.1.5` |
+| `devStaticIP`          | Whether the device has a static IP address. | `0` |
+| `devScan`              | Whether the device should be scanned. | `1` |
+| `devLogEvents`         | Whether events related to the device should be logged. | `0` |
+| `devAlertEvents`       | Whether alerts should be generated for events. | `1` |
+| `devAlertDown`         | Whether an alert should be sent when the device goes down. | `0` |
+| `devSkipRepeated`      | Whether to skip repeated alerts for this device. | `1` |
+| `devLastNotification`  | Timestamp of the last notification sent for this device. | `2025-03-22 12:07:26+11:00` |
+| `devPresentLastScan`   | Whether the device was present during the last scan. | `1` |
+| `devIsNew`             | Whether the device is marked as new. | `0` |
+| `devLocation`          | Physical or logical location of the device. | `Living Room` |
+| `devIsArchived`        | Whether the device is archived. | `0` |
+| `devParentMAC`         | MAC address of the parent device (if applicable) to build the [Network Tree](./NETWORK_TREE.md). | `00:1A:2B:3C:4D:5F` |
+| `devParentPort`        | Port of the parent device to which this device is connected. | `Port 3` |
+| `devIcon`              | [Icon](./ICONS.md) representing the device. The value is a base64-encoded SVG or Font Awesome HTML tag. | `PHN2ZyB...` |
+| `devGUID`              | Unique identifier for the device. | `a2f4b5d6-7a8c-9d10-11e1-f12345678901` |
+| `devSite`              | Site or location where the device is registered. | `Office` |
+| `devSSID`              | SSID of the Wi-Fi network the device is connected to. | `HomeNetwork` |
+| `devSyncHubNode`       | The NetAlertX node ID used for synchronization between NetAlertX instances. | `node_1` |
+| `devSourcePlugin`      | Source plugin that discovered the device. | `ARPSCAN` |
+| `devCustomProps`       | [Custom properties](./CUSTOM_PROPERTIES.md) related to the device. The value is a base64-encoded JSON object. | `PHN2ZyB...` |
+| `devFQDN`              | Fully qualified domain name. | `raspberrypi.local` |
+| `devParentRelType`     | The type of relationship between the current device and it's parent node. By default, selecting `nic` will hide it from lists. | `nic` |
+| `devReqNicsOnline`     | If all NICs are required to be online to mark teh current device online. | `0` |
+
+
+To understand how values of these fields influuence application behavior, such as Notifications or Network topology, see also: 
+
+- [Device Management](./DEVICE_MANAGEMENT.md)
+- [Network Tree Topology Setup](./NETWORK_TREE.md)
+- [Notifications](./NOTIFICATIONS.md)
+
+
+## Other Tables overview
   
   | Table name | Description  | Sample data |
   |----------------------|----------------------| ----------------------| 

docs/DEBUG_GRAPHQL.md

@@ -0,0 +1,64 @@
+# Debugging GraphQL server issues
+
+The GraphQL server is an API middle layer, running on it's own port specified by `GRAPHQL_PORT`, to retrieve and show the data in the UI. It can also be used to retrieve data for custom third party integarions. Check the [API documentation](./API.md) for details. 
+
+The most common issue is that the GraphQL server doesn't start properly, usually due to a **port conflict**. If you are running multiple NetAlertX instances, make sure to use **unique ports** by changing the `GRAPHQL_PORT` setting. The default is `20212`.
+
+## How to update the `GRAPHQL_PORT` in case of issues
+
+As a first troubleshooting step try changing the default `GRAPHQL_PORT` setting. Please remember NetAlertX is running on the host so any application uising the same port will cause issues.  
+
+### Updating the setting via the Settings UI
+
+Ideally use the Settings UI to update the setting under General -> Core -> GraphQL port:
+
+![GrapQL settings](./img/DEBUG_GRAPHQL/graphql_settings_port_token.png)
+
+You might need to temporarily stop other applications or NetAlertX instances causing conflicts to update the setting. The `API_TOKEN` is used to authenticate any API calls, including GraphQL requests. 
+
+### Updating the `app.conf` file
+
+If the UI is not accessible, you can directly edit the `app.conf` file in your `/config` folder:
+
+![Editing app.conf](./img/DEBUG_GRAPHQL/app_conf_graphql_port.png)
+
+### Using a docker variable
+
+All application settings can also be initialized via the `APP_CONF_OVERRIDE` docker env variable. 
+
+```yaml
+...
+ environment:
+      - TZ=Europe/Berlin      
+      - PORT=20213
+      - APP_CONF_OVERRIDE={"GRAPHQL_PORT":"20214"}
+...
+```
+
+## How to check the GraphQL server is running?
+
+There are several ways to check if the GraphQL server is running.
+
+### Init Check
+
+You can navigate to Maintenance -> Init Check to see if `isGraphQLServerRunning` is ticked:
+
+![Init Check](./img/DEBUG_GRAPHQL/Init_check.png)
+
+### Checking the Logs
+
+You can navigate to Maintenance -> Logs and search for `graphql` to see if it started correctly and serving requests:
+
+![GraphQL Logs](./img/DEBUG_GRAPHQL/graphql_running_logs.png)
+
+### Inspecting the Browser console
+
+In your browser open the dev console (usually F12) and navigate to the Network tab where you can filter GraphQL requests (e.g., reload the Devices page).
+
+![Browser Network Tab](./img/DEBUG_GRAPHQL/network_graphql.png)
+
+You can then inspect any of the POST requests by opening them in a new tab.
+
+![Browser GraphQL Json](./img/DEBUG_GRAPHQL/dev_console_graphql_json.png)
+
+

docs/DEBUG_INVALID_JSON.md

@@ -10,7 +10,7 @@ Check the the HTTP response of the failing backend call by following these steps
 - Copy the URL causing the error and enter it in the address bar of your browser directly and hit enter. The copied URLs could look something like this (notice the query strings at the end):
   - `http://<NetAlertX URL>:20211/api/table_devices.json?nocache=1704141103121`
   - `http://<NetAlertX URL>:20211/php/server/devices.php?action=getDevicesTotals`
-  - `http://<NetAlertX URL>:20211/php/server/devices.php?action=getDevicesList&status=all`  
+
 
 - Post the error response in the existing issue thread on GitHub or create a new issue and include the redacted response of the failing query.
 

docs/DEBUG_PHP.md

@@ -0,0 +1,34 @@
+# Debugging backend PHP issues
+
+## Logs in UI
+
+![Logs UI](./img/DEBUG/maintenance_debug_php.png)
+
+You can view recent backend PHP errors directly in the **Maintenance > Logs** section of the UI. This provides quick access to logs without needing terminal access.
+
+## Accessing logs directly
+
+Sometimes, the UI might not be accessible. In that case, you can access the logs directly inside the container.
+
+### Step-by-step:
+
+1. **Open a shell into the container:**
+
+   ```bash
+   docker exec -it netalertx /bin/sh
+   ```
+
+2. **Check the NGINX error log:**
+
+   ```bash
+   cat /var/log/nginx/error.log
+   ```
+
+3. **Check the PHP application error log:**
+
+   ```bash
+   cat /tmp/log/app.php_errors.log
+   ```
+
+These logs will help identify syntax issues, fatal errors, or startup problems when the UI fails to load properly.
+

docs/DEBUG_PLUGINS.md

@@ -2,7 +2,7 @@
 
 ## High-level overview
 
-If a Plugin supplies data to the main app it's doine either vie a SQL query or via a script that updates the `last_result.log` file in the plugin folder (`front/plugins/<plugin>`).
+If a Plugin supplies data to the main app it's done either vie a SQL query or via a script that updates the `last_result.log` file in the plugin log folder (`app/log/plugins/`).
 
 For a more in-depth overview on how plugins work check the [Plugins development docs](https://github.com/jokob-sk/NetAlertX/blob/main/docs/PLUGINS.md).
 

docs/DEBUG_TIPS.md

@@ -14,11 +14,11 @@ Start the container via the **terminal** with a command similar to this one:
 
 ```bash
 docker run --rm --network=host \
-  -v local/path/netalertx/config:/app/config \
-  -v local/path/netalertx/db:/app/db \
+  -v local/path/netalertx/config:/data/config \
+  -v local/path/netalertx/db:/data/db \
   -e TZ=Europe/Berlin \
   -e PORT=20211 \
-  jokobsk/netalertx:latest
+  ghcr.io/jokob-sk/netalertx:latest
 
 ```
 

docs/DEVICES_BULK_EDITING.md

@@ -14,6 +14,8 @@ You can select devices in the _Devices_ view by selecting devices to edit and th
 
 ## CSV bulk edit
 
+The database and device structure may change with new releases. When using the CSV import functionality, ensure the format matches what the application expects. To avoid issues, you can first export the devices and review the column formats before importing any custom data.
+
 > [!NOTE] 
 > As always, backup everything, just in case.
 

docs/DEVICE_DISPLAY_SETTINGS.md

@@ -4,3 +4,17 @@ This set of settings allows you to group Devices under different views. The Arch
 
 
 ![Display settings](./img/DEVICE_MANAGEMENT/DeviceDetails_DisplaySettings.png)
+
+
+## Status Colors
+
+![Sattus colors](./img/DEVICE_MANAGEMENT/device_management_status_colors.png)
+
+1. 🔌 Online (Green) = A device that is no longer marked as a "New Device".
+2. 🔌 New (Green) = A newly discovered device that is online and is still marked as a "New Device".
+3. ✖ New (Grey) = Same as No.2 but device is now offline.
+4. ✖ Offline (Grey) = A device that was not detected online in the last scan. 
+5. ⚠ Down (Red) = A device that has "Alert Down" marked and has been offline for the time set in the Setting `NTFPRCS_alert_down_time`. 
+
+
+See also [Notification guide](./NOTIFICATIONS.md).

docs/DEVICE_HEURISTICS.md

@@ -0,0 +1,114 @@
+# Device Heuristics: Icon and Type Guessing
+
+This module is responsible for inferring the most likely **device type** and **icon** based on minimal identifying data like MAC address, vendor, IP, or device name.
+
+It does this using a set of heuristics defined in an external JSON rules file, which it evaluates **in priority order**.
+
+>[!NOTE]
+> You can find the full source code of the heuristics module in the `device_heuristics.py` file.  
+
+---
+
+## JSON Rule Format
+
+Rules are defined in a file called `device_heuristics_rules.json` (located under `/back`), structured like:
+
+```json
+[
+  {
+    "dev_type": "Phone",
+    "icon_html": "<i class=\"fa-brands fa-apple\"></i>",
+    "matching_pattern": [
+      { "mac_prefix": "001A79", "vendor": "Apple" }
+    ],
+    "name_pattern": ["iphone", "pixel"]
+  }
+]
+```
+
+>[!NOTE]
+> Feel free to raise a PR in case you'd like to add any rules into the `device_heuristics_rules.json` file. Please place new rules into the correct position and consider the priority of already available rules.
+
+### Supported fields:
+
+| Field              | Type                 | Description                                                     |
+| ------------------ | -------------------- | --------------------------------------------------------------- |
+| `dev_type`         | `string`             | Type to assign if rule matches (e.g. `"Gateway"`, `"Phone"`)    |
+| `icon_html`        | `string`             | Icon (HTML string) to assign if rule matches. Encoded to base64 at load time. |
+| `matching_pattern` | `array`              | List of `{ mac_prefix, vendor }` objects for first strict and then loose matching    |
+| `name_pattern`     | `array` *(optional)* | List of lowercase substrings (used with regex)                  |
+| `ip_pattern`       | `array` *(optional)* | Regex patterns to match IPs                                     |
+
+**Order in this array defines priority** — rules are checked top-down and short-circuit on first match.
+
+---
+
+## Matching Flow (in Priority Order)
+
+The function `guess_device_attributes(...)` runs a series of matching functions in strict order:
+
+1. MAC + Vendor → `match_mac_and_vendor()`
+2. Vendor only → `match_vendor()`
+3. Name pattern → `match_name()`
+4. IP pattern → `match_ip()`
+5. Final fallback → defaults defined in the `NEWDEV_devIcon` and `NEWDEV_devType` settings.
+
+> [!NOTE]
+> The app will try guessing the device type or icon if `devType` or `devIcon` are `""` or `"null"`.
+
+### Use of default values
+
+The guessing process runs for every device **as long as the current type or icon still matches the default values**. Even if earlier heuristics return a match, the system continues evaluating additional clues — like name or IP — to try and replace placeholders.
+
+```python
+# Still considered a match attempt if current values are defaults
+if (not type_ or type_ == default_type) or (not icon or icon == default_icon):
+    type_, icon = match_ip(ip, default_type, default_icon)
+```
+
+In other words: if the type or icon is still `"unknown"` (or matches the default), the system assumes the match isn’t final — and keeps looking. It stops only when both values are non-default (defaults are defined in the `NEWDEV_devIcon` and `NEWDEV_devType` settings).
+
+---
+
+## Match Behavior (per function)
+
+These functions are executed in the following order:
+
+### `match_mac_and_vendor(mac_clean, vendor, ...)`
+
+* Looks for MAC prefix **and** vendor substring match
+* Most precise
+* Stops as soon as a match is found
+
+### `match_vendor(vendor, ...)`
+
+* Falls back to substring match on vendor only
+* Ignores rules where `mac_prefix` is present (ensures this is really a fallback)
+
+### `match_name(name, ...)`
+
+* Lowercase name is compared against all `name_pattern` values using regex
+* Good for user-assigned labels (e.g. "AP Office", "iPhone")
+
+### `match_ip(ip, ...)`
+
+* If IP is present and matches regex patterns under any rule, it returns that type/icon
+* Usually used for gateways or local IP ranges
+
+---
+
+## Icons
+
+* Each rule can define an `icon_html`, which is converted to a `icon_base64` on load
+* If missing, it falls back to the passed-in `default_icon` (`NEWDEV_devIcon` setting)
+* If a match is found but icon is still blank, default is used
+
+**TL;DR:** Type and icon must both be matched. If only one is matched, the other falls back to the default.
+
+---
+
+## Priority Mechanics
+
+* JSON rules are evaluated **top-to-bottom**
+* Matching is **first-hit wins** — no scoring, no weights
+* Rules that are more specific (e.g. exact MAC prefixes) should be listed earlier

docs/DEV_DEVCONTAINER.md

@@ -0,0 +1,63 @@
+# Devcontainer for NetAlertX Guide
+
+This devcontainer is designed to mirror the production container environment as closely as possible, while providing a rich set of tools for development.
+
+## How to Get Started
+
+1.  **Prerequisites:**
+    * A working **Docker installation** that can be managed by your user. This can be [Docker Desktop](https://www.docker.com/products/docker-desktop/) or Docker Engine installed via other methods (like the official [get-docker script](https://get.docker.com)).
+    * [Visual Studio Code](https://code.visualstudio.com/) installed.
+    * The [VS Code Dev Containers extension](https://marketplace.visualstudio.com/items?itemName=ms-vscode-remote.remote-containers) installed.
+
+2.  **Launch the Devcontainer:**
+    * Clone this repository.
+    * Open the repository folder in VS Code.
+    * A notification will pop up in the bottom-right corner asking to **"Reopen in Container"**. Click it.
+    * VS Code will now build the Docker image and connect your editor to the container. Your terminal, debugger, and all tools will now be running inside this isolated environment.
+
+## Key Workflows & Features
+
+Once you're inside the container, everything is set up for you.
+
+### 1. Services (Frontend & Backend)
+
+![Services](./img/DEV/devcontainer_1.png)
+
+The container's startup script (`.devcontainer/scripts/setup.sh`) automatically starts the Nginx/PHP frontend and the Python backend. You can restart them at any time using the built-in tasks.
+
+### 2. Integrated Debugging (Just Press F5!)
+
+![Debugging](./img/DEV/devcontainer_2.png)
+
+Debugging for both the Python backend and PHP frontend is pre-configured and ready to go.
+
+* **Python Backend (debugpy):** The backend automatically starts with a debugger attached on port `5678`. Simply open a Python file (e.g., `server/__main__.py`), set a breakpoint, and press **F5** (or select "Python Backend Debug: Attach") to connect the debugger.
+* **PHP Frontend (Xdebug):** Xdebug listens on port `9003`. In VS Code, start listening for Xdebug connections and use a browser extension (like "Xdebug helper") to start a debugging session for the web UI.
+
+### 3. Common Tasks (F1 -> Run Task)
+
+![Common tasks](./img/DEV/devcontainer_3.png)
+
+We've created several VS Code Tasks to simplify common operations. Access them by pressing `F1` and typing "Tasks: Run Task".
+
+* `Generate Dockerfile`: **This is important.** The actual `.devcontainer/Dockerfile` is auto-generated. If you need to change the container environment, edit `.devcontainer/resources/devcontainer-Dockerfile` and then run this task.
+* `Re-Run Startup Script`: Manually re-runs the `.devcontainer/scripts/setup.sh` script to re-link files and restart services.
+* `Start Backend (Python)` / `Start Frontend (nginx and PHP-FPM)`: Manually restart the services if needed.
+
+### 4. Running Tests
+
+![Running tests](./img/DEV/devcontainer_4.png)
+
+The environment includes `pytest`. You can run tests directly from the VS Code Test Explorer UI or by running `pytest -q` in the integrated terminal. The necessary `PYTHONPATH` is already configured so that tests can correctly import the server modules.
+
+## How to Maintain This Devcontainer
+
+The setup is designed to be easy to manage. Here are the core principles:
+
+* **Don't Edit `Dockerfile` Directly:** The main `.devcontainer/Dockerfile` is a combination of the project's root `Dockerfile` and a special dev-only stage. To add new tools or dependencies, **edit `.devcontainer/resources/devcontainer-Dockerfile`** and then run the `Generate Dockerfile` task.
+* **Build-Time vs. Run-Time Setup:**
+    * For changes that can be baked into the image (like installing a new package with `apk add`), add them to the resource Dockerfile.
+    * For changes that must happen when the container *starts* (like creating symlinks, setting permissions, or starting services), use `.devcontainer/scripts/setup.sh`.
+* **Project Conventions:** The `.github/copilot-instructions.md` file is an excellent resource to help AI and humans understand the project's architecture, conventions, and how to use existing helper functions instead of hardcoding values.
+
+This setup provides a powerful and consistent foundation for all current and future contributors to NetAlertX.

docs/DEV_ENV_SETUP.md

@@ -1,35 +1,51 @@
-## Development environment set up
+# Development Environment Setup
+
+I truly appreciate all contributions! To help keep this project maintainable, this guide provides an overview of project priorities, key design considerations, and overall philosophy. It also includes instructions for setting up your environment so you can start contributing right away.
+
+## Development Guidelines
+
+Before starting development, please review the following guidelines.
+
+### Priority Order (Highest to Lowest)
+
+1. 🔼 Fixing core bugs that lack workarounds  
+2. 🔵 Adding core functionality that unlocks other features (e.g., plugins)  
+3. 🔵 Refactoring to enable faster development  
+4. 🔽 UI improvements (PRs welcome, but low priority)  
+
+### Design Philosophy
+
+The application architecture is designed for extensibility and maintainability. It relies heavily on configuration manifests via plugins and settings to dynamically build the UI and populate the application with data from various sources.  
+
+For details, see:  
+- [Plugins Development](PLUGINS_DEV.md) (includes video)  
+- [Settings System](SETTINGS_SYSTEM.md)  
+
+Focus on **core functionality** and integrate with existing tools rather than reinventing the wheel.  
+
+Examples:  
+- Using **Apprise** for notifications instead of implementing multiple separate gateways  
+- Implementing **regex-based validation** instead of one-off validation for each setting  
+
+> [!NOTE]  
+> UI changes have lower priority. PRs are welcome, but please keep them **small and focused**.
+
+## Development Environment Set Up
+
+>[!TIP]
+> There is also a ready to use [devcontainer](DEV_DEVCONTAINER.md) available.
+
+The following steps will guide you to set up your environment for local development and to run a custom docker build on your system. For most changes the container doesn't need to be rebuild which speeds up the development significantly.
 
 >[!NOTE]
 > Replace `/development` with the path where your code files will be stored. The default container name is `netalertx` so there might be a conflict with your running containers.
 
-### Development Guidelines
-
-**Priority Order (Highest to Lowest):**
-
-1. 🔼 Fixing core bugs that lack workarounds.
-2. 🔵 Adding core functionality that unlocks other features (e.g., plugins).
-3. 🔵 Refactoring to enable faster development.
-4. 🔽 UI improvements (PRs welcome).
-
-💡 **Design Philosophy:**  
-Focus on core functionality and integrate with existing tools rather than reinventing the wheel.  
-Examples:
-
-- Using **Apprise** for notifications instead of implementing multiple separate gateways.
-- Implementing **regex-based validation** instead of one-off validation for each setting.
-
-📌 **Note on UI requests:**  
-
-- UI changes have lower priority due to framework limitations and mobile support constraints.  
-- PRs are welcome, but **keep them small & focused**.
-
-## 1. Download the code:
+### 1. Download the code:
 
 - `mkdir /development`
 - `cd /development && git clone https://github.com/jokob-sk/NetAlertX.git`
 
-## 2. Create a DEV .env_dev file
+### 2. Create a DEV .env_dev file
 
 `touch /development/.env_dev && sudo nano /development/.env_dev`
 
@@ -43,10 +59,12 @@ TZ=Europe/Berlin
 PORT=22222    # make sure this port is unique on your whole network
 DEV_LOCATION=/development/NetAlertX
 APP_DATA_LOCATION=/volume/docker_appdata
+# Make sure your GRAPHQL_PORT setting has a port that is unique on your whole host network
+APP_CONF_OVERRIDE={"GRAPHQL_PORT":"22223"} 
 # ALWAYS_FRESH_INSTALL=true # uncommenting this will always delete the content of /config and /db dirs on boot to simulate a fresh install
 ```
 
-## 3. Create /db and /config dirs 
+### 3. Create /db and /config dirs 
 
 Create a folder `netalertx` in the `APP_DATA_LOCATION` (in this example in `/volume/docker_appdata`) with 2 subfolders `db` and `config`. 
 
@@ -54,7 +72,7 @@ Create a folder `netalertx` in the `APP_DATA_LOCATION` (in this example in `/vol
 - `mkdir /volume/docker_appdata/netalertx/db`
 - `mkdir /volume/docker_appdata/netalertx/config`
 
-## 4. Run the container
+### 4. Run the container
 
 - `cd /development/NetAlertX &&  sudo docker-compose --env-file ../.env_dev `
 
@@ -63,7 +81,7 @@ You can then modify the python script without restarting/rebuilding the containe
 ![image](https://github.com/jokob-sk/NetAlertX/assets/96159884/3cbf2748-03c8-49e7-b801-f38c7755246b)
 
 
-## 💡 Tips
+## Tips
 
 A quick cheat sheet of useful commands. 
 
@@ -75,22 +93,24 @@ A command to stop, remove the container and the image (replace `netalertx` and `
 
 ### Restart the server backend
 
-Most code changes can be tetsed without rebuilding the container. When working on the python server backend, you only need to restart the server.
+Most code changes can be tested without rebuilding the container. When working on the python server backend, you only need to restart the server.
 
-1. You can usually restart the backend via Maintenance > Logs > Restart server
+1. You can usually restart the backend via _Maintenance > Logs > Restart_ server
 
-![image](./img/DEV_ENV_SETUP/Maintenance_Logs_Restart_server.png)
+![image](./img/DEV/Maintenance_Logs_Restart_server.png)
 
 2. If above doesn't work, SSH into the container and kill & restart the main script loop 
 
 - `sudo docker exec -it netalertx /bin/bash`
 - `pkill -f "python /app/server" && python /app/server & `
 
-3. If none of the above work, restart the docker image. This is usually the last resort as sometimes the Docker engine becomes unresponsive and the whole engine needs to be restarted. 
+3. If none of the above work, restart the docker container. 
 
-## ➕ Contributing & Pull Requests
+- This is usually the last resort as sometimes the Docker engine becomes unresponsive and the whole engine needs to be restarted. 
 
-**Before submitting a PR, please ensure:**
+## Contributing & Pull Requests
+
+### Before submitting a PR, please ensure:
 
 ✔ Changes are **backward-compatible** with existing installs.  
 ✔ No unnecessary changes are made.  
@@ -112,3 +132,6 @@ Most code changes can be tetsed without rebuilding the container. When working o
 - Updating a Device
 - Plugin functionality.
 - Error log inspection.
+
+> [!NOTE]  
+> Always run all available tests as per the [Testing documentation](API_TESTS.md).

docs/DEV_PORTS_HOST_MODE.md

@@ -0,0 +1,44 @@
+# Dev Ports in Host Network Mode
+
+When using `"--network=host"` in the devcontainer, VS Code's normal port forwarding model doesn't apply. All container ports are already on the host network namespace, so:
+
+- Listing ports in `forwardPorts` can cause VS Code to pre-bind or reserve them (conflicts with startup scripts waiting for a free port).
+- The PORTS panel will not auto-detect services reliably, because forwarding isn't occurring.
+- Debugger ports (e.g. Xdebug `9003`, Python debugpy `5678`) can still be listed safely.
+
+## Recommended Pattern
+
+1. Only include debugger ports in `forwardPorts`:
+   ```jsonc
+   "forwardPorts": [5678, 9003]
+   ```
+2. Do NOT list application service ports (e.g. 20211, 20212) there when in host mode.
+3. Use the helper task to enumerate current bindings:
+   - Run task: `> Tasks: Run Task` → `[Dev Container] List NetAlertX Ports`
+
+## Port Enumeration Script
+Script: `scripts/list-ports.sh`
+Outputs binding address, PID (if resolvable) and process name for key ports.
+
+You can edit the PORTS variable inside that script to add/remove watched ports.
+
+## Xdebug Notes
+Set in `99-xdebug.ini`:
+```ini
+xdebug.client_host=127.0.0.1
+xdebug.client_port=9003
+xdebug.discover_client_host=1
+```
+Ensure your IDE is listening on 9003.
+
+## Troubleshooting
+| Symptom | Cause | Fix |
+|---------|-------|-----|
+| `Waiting for port 20211 to free...` repeats | VS Code pre-bound the port via `forwardPorts` | Remove the port from `forwardPorts`, rebuild, retry |
+| PHP request hangs at start | Xdebug trying to connect to unresolved host (`host.docker.internal`) | Use `127.0.0.1` or rely on discovery |
+| PORTS panel empty | Expected in host mode | Use the port enumeration task |
+
+## Future Improvements
+- Optional: add a small web status endpoint summarizing runtime ports.
+- Optional: detect host mode in `setup.sh` and skip the wait loop if the PID using port is the intended process.
+

docs/DOCKER_COMPOSE.md

@@ -1,102 +1,234 @@
-# `docker-compose.yaml` Examples
+# NetAlertX and Docker Compose
 
-### Example 1
+> [!WARNING]
+> ⚠️ **Important:** The documentation has been recently updated and some instructions may have changed.  
+> If you are using the currently live production image, please follow the instructions on [Docker Hub](https://hub.docker.com/r/jokobsk/netalertx) for building and running the container.  
+> These docs reflect the latest development version and may differ from the production image.
+
+Great care is taken to ensure NetAlertX meets the needs of everyone while being flexible enough for anyone. This document outlines how you can configure your docker-compose. There are many settings, so we recommend using the Baseline Docker Compose as-is, or modifying it for your system.Good care is taken to ensure NetAlertX meets the needs of everyone while being flexible enough for anyone. This document outlines how you can configure your docker-compose. There are many settings, so we recommend using the Baseline Docker Compose as-is, or modifying it for your system. 
+
+> [!NOTE] 
+> The container needs to run in `network_mode:"host"` to access Layer 2 networking such as arp, nmap and others. Due to lack of support for this feature, Windows host is not a supported operating system. 
+
+## Baseline Docker Compose
+
+There is one baseline for NetAlertX. That's the default security-enabled official distribution. 
 
 ```yaml
 services:
   netalertx:
-    container_name: netalertx
-    # use the below line if you want to test the latest dev image
-    # image: "ghcr.io/jokob-sk/netalertx-dev:latest" 
-    image: "jokobsk/netalertx:latest"      
-    network_mode: "host"        
-    restart: unless-stopped
+  #use an environmental variable to set host networking mode if needed
+    container_name: netalertx                       # The name when you docker contiainer ls
+    image: ghcr.io/jokob-sk/netalertx-dev:latest
+    network_mode: ${NETALERTX_NETWORK_MODE:-host}   # Use host networking for ARP scanning and other services
+
+    read_only: true                                 # Make the container filesystem read-only
+    cap_drop:                                       # Drop all capabilities for enhanced security
+      - ALL
+    cap_add:                                        # Add only the necessary capabilities
+      - NET_ADMIN                                   # Required for ARP scanning
+      - NET_RAW                                     # Required for raw socket operations
+      - NET_BIND_SERVICE                            # Required to bind to privileged ports (nbtscan)
+
     volumes:
-      - local_path/config:/app/config
-      - local_path/db:/app/db      
-      # (optional) useful for debugging if you have issues setting up the container
-      - local_path/logs:/app/log
-      # (API: OPTION 1) use for performance
-      - type: tmpfs
-        target: /app/api
-      # (API: OPTION 2) use when debugging issues 
-      # -  local_path/api:/app/api
+      - type: volume                                # Persistent Docker-managed named volume for config + database
+        source: netalertx_data
+        target: /data                               # `/data/config` and `/data/db` live inside this mount
+        read_only: false
+
+    # Example custom local folder called /home/user/netalertx_data
+    # - type: bind
+    #   source: /home/user/netalertx_data
+    #   target: /data
+    #   read_only: false
+    # ... or use the alternative format
+    # - /home/user/netalertx_data:/data:rw
+
+      - type: bind                                  # Bind mount for timezone consistency
+        source: /etc/localtime                      # Alternatively add environment TZ: America/New York
+        target: /etc/localtime
+        read_only: true
+
+      # Mount your DHCP server file into NetAlertX for a plugin to access
+      # - path/on/host/to/dhcp.file:/resources/dhcp.file
+
+    # tmpfs mount consolidates writable state for a read-only container and improves performance
+    # uid=20211 and gid=20211 is the netalertx user inside the container
+    # mode=1700 grants rwx------ permissions to the netalertx user only
+    tmpfs:
+      # Comment out to retain logs between container restarts - this has a server performance impact.
+      - "/tmp:uid=20211,gid=20211,mode=1700,rw,noexec,nosuid,nodev,async,noatime,nodiratime"
+
+      # Retain logs - comment out tmpfs /tmp if you want to retain logs between container restarts
+      # Please note if you remove the /tmp mount, you must create and maintain sub-folder mounts.
+      # - /path/on/host/log:/tmp/log
+      # - "/tmp/api:uid=20211,gid=20211,mode=1700,rw,noexec,nosuid,nodev,async,noatime,nodiratime"
+      # - "/tmp/nginx:uid=20211,gid=20211,mode=1700,rw,noexec,nosuid,nodev,async,noatime,nodiratime"
+      # - "/tmp/run:uid=20211,gid=20211,mode=1700,rw,noexec,nosuid,nodev,async,noatime,nodiratime"
+
     environment:
-      - TZ=Europe/Berlin      
-      - PORT=20211
+      LISTEN_ADDR: ${LISTEN_ADDR:-0.0.0.0}                   # Listen for connections on all interfaces
+      PORT: ${PORT:-20211}                                   # Application port
+      GRAPHQL_PORT: ${GRAPHQL_PORT:-20212}                   # GraphQL API port (passed into APP_CONF_OVERRIDE at runtime)
+  #    NETALERTX_DEBUG: ${NETALERTX_DEBUG:-0}                 # 0=kill all services and restart if any dies. 1 keeps running dead services.
+
+    # Resource limits to prevent resource exhaustion
+    mem_limit: 2048m            # Maximum memory usage
+    mem_reservation: 1024m      # Soft memory limit
+    cpu_shares: 512             # Relative CPU weight for CPU contention scenarios
+    pids_limit: 512             # Limit the number of processes/threads to prevent fork bombs
+    logging:
+      driver: "json-file"       # Use JSON file logging driver
+      options:
+        max-size: "10m"         # Rotate log files after they reach 10MB
+        max-file: "3"           # Keep a maximum of 3 log files
+
+    # Always restart the container unless explicitly stopped
+    restart: unless-stopped
+
+volumes:                        # Persistent volume for configuration and database storage
+  netalertx_data:
 ```
 
-To run the container execute: `sudo docker-compose up -d`
+Run or re-run it:
 
-### Example 2
-
-Example by [SeimuS](https://github.com/SeimusS).
-
-```yaml
-services:
-  netalertx:
-    container_name: NetAlertX
-    hostname: NetAlertX
-    privileged: true
-    # use the below line if you want to test the latest dev image
-    # image: "ghcr.io/jokob-sk/netalertx-dev:latest" 
-    image: jokobsk/netalertx:latest
-    environment:
-      - TZ=Europe/Bratislava
-    restart: always
-    volumes:
-      - ./netalertx/db:/app/db
-      - ./netalertx/config:/app/config
-    network_mode: host
+```sh
+docker compose up --force-recreate
 ```
 
-To run the container execute: `sudo docker-compose up -d`
+### Customize with Environmental Variables
 
-### Example 3
+You can override the default settings by passing environmental variables to the `docker compose up` command.
 
-`docker-compose.yml` 
+**Example using a single variable:**
+
+This command runs NetAlertX on port 8080 instead of the default 20211.
+
+```sh
+PORT=8080 docker compose up
+```
+
+**Example using all available variables:**
+
+This command demonstrates overriding all primary environmental variables: running with host networking, on port 20211, GraphQL on 20212, and listening on all IPs.
+
+```sh
+NETALERTX_NETWORK_MODE=host \
+LISTEN_ADDR=0.0.0.0 \
+PORT=20211 \
+GRAPHQL_PORT=20212 \
+NETALERTX_DEBUG=0 \
+docker compose up
+```
+
+## `docker-compose.yaml` Modifications
+
+### Modification 1: Use a Local Folder (Bind Mount)
+
+By default, the baseline compose file uses "named volumes" (`netalertx_config`, `netalertx_db`). **This is the preferred method** because NetAlertX is designed to manage all configuration and database settings directly from its web UI. Named volumes let Docker handle this data cleanly without you needing to manage local file permissions or paths.
+
+However, if you prefer to have direct, file-level access to your configuration for manual editing, a "bind mount" is a simple alternative. This tells Docker to use a specific folder from your computer (the "host") inside the container.
+
+**How to make the change:**
+
+1. Choose a location on your computer. For example, `/home/adam/netalertx-files`.
+
+2. Create the subfolders: `mkdir -p /home/adam/netalertx-files/config` and `mkdir -p /home/adam/netalertx-files/db`.
+
+3. Edit your `docker-compose.yml` and find the `volumes:` section (the one *inside* the `netalertx:` service).
+
+4. Comment out (add a `#` in front) or delete the `type: volume` blocks for `netalertx_config` and `netalertx_db`.
+
+5. Add new lines pointing to your local folders.
+
+**Before (Using Named Volumes - Preferred):**
 
 ```yaml
+...
+    volumes:
+      - netalertx_config:/data/config:rw #short-form volume (no /path is a short volume)
+      - netalertx_db:/data/db:rw
+...
+```
+
+**After (Using a Local Folder / Bind Mount):**
+Make sure to replace `/home/adam/netalertx-files` with your actual path. The format is `<path_on_your_computer>:<path_inside_container>:<options>`.
+
+```yaml
+...
+    volumes:
+#      - netalertx_config:/data/config:rw
+#      - netalertx_db:/data/db:rw
+      - /home/adam/netalertx-files/config:/data/config:rw
+      - /home/adam/netalertx-files/db:/data/db:rw
+...
+```
+
+Now, any files created by NetAlertX in `/data/config` will appear in your `/home/adam/netalertx-files/config` folder.
+
+This same method works for mounting other things, like custom plugins or enterprise NGINX files, as shown in the commented-out examples in the baseline file.
+
+## Example Configuration Summaries
+
+Here are the essential modifications for common alternative setups.
+
+### Example 2: External `.env` File for Paths
+
+This method is useful for keeping your paths and other settings separate from your main compose file, making it more portable.
+
+**`docker-compose.yml` changes:**
+
+```yaml
+...
 services:
   netalertx:
-    container_name: netalertx
-    # use the below line if you want to test the latest dev image
-    # image: "ghcr.io/jokob-sk/netalertx-dev:latest" 
-    image: "jokobsk/netalertx:latest"      
-    network_mode: "host"        
-    restart: unless-stopped
-    volumes:
-      - ${APP_DATA_LOCATION}/netalertx/config:/app/config
-      - ${APP_DATA_LOCATION}/netalertx/db/:/app/db/      
-      # (optional) useful for debugging if you have issues setting up the container
-      - ${LOGS_LOCATION}:/app/log
-      # (API: OPTION 1) use for performance
-      - type: tmpfs
-        target: /app/api
-      # (API: OPTION 2) use when debugging issues 
-      # -  local/path/api:/app/api
     environment:
       - TZ=${TZ}
       - PORT=${PORT}
+      
+...
 ```
 
-`.env` file
-
-```yaml
-#GLOBAL PATH VARIABLES
-
-APP_DATA_LOCATION=/path/to/docker_appdata
-APP_CONFIG_LOCATION=/path/to/docker_config
-LOGS_LOCATION=/path/to/docker_logs
-
-#ENVIRONMENT VARIABLES
+**`.env` file contents:**
 
+```sh
 TZ=Europe/Paris
 PORT=20211
-
-#DEVELOPMENT VARIABLES
-
-DEV_LOCATION=/path/to/local/source/code
+NETALERTX_NETWORK_MODE=host
+LISTEN_ADDR=0.0.0.0
+PORT=20211
+GRAPHQL_PORT=20212
 ```
 
-To run the container execute: `sudo docker-compose --env-file /path/to/.env up`
+Run with: `sudo docker-compose --env-file /path/to/.env up`
+
+### Example 3: Docker Swarm
+
+This is for deploying on a Docker Swarm cluster. The key differences from the baseline are the removal of `network_mode:` from the service, and the addition of `deploy:` and `networks:` blocks at both the service and top-level.
+
+Here are the *only* changes you need to make to the baseline compose file to make it Swarm-compatible.
+
+```yaml
+services:
+  netalertx:
+    ...
+    #    network_mode: ${NETALERTX_NETWORK_MODE:-host} # <-- DELETE THIS LINE
+    ...
+
+    # 2. ADD a 'networks:' block INSIDE the service to connect to the external host network.
+    networks:
+      - outside
+    # 3. ADD a 'deploy:' block to manage the service as a swarm replica.
+    deploy:
+      mode: replicated
+      replicas: 1
+      restart_policy:
+        condition: on-failure
+
+
+# 4. ADD a new top-level 'networks:' block at the end of the file to define 'outside' as the external 'host' network.
+networks:
+  outside:
+    external:
+      name: "host"
+```

docs/DOCKER_INSTALLATION.md

@@ -6,7 +6,7 @@
 
 # NetAlertX - Network scanner & notification framework
 
-| [📑 Docker guide](https://github.com/jokob-sk/NetAlertX/blob/main/dockerfiles/README.md) | [🚀 Releases](https://github.com/jokob-sk/NetAlertX/releases) | [📚 Docs](https://jokob-sk.github.io/NetAlertX/) | [🔌 Plugins](https://github.com/jokob-sk/NetAlertX/blob/main/docs/PLUGINS.md) | [🤖 Ask AI](https://gurubase.io/g/netalertx)
+| [📑 Docker guide](https://github.com/jokob-sk/NetAlertX/blob/main/docs/DOCKER_INSTALLATION.md) | [🚀 Releases](https://github.com/jokob-sk/NetAlertX/releases) | [📚 Docs](https://jokob-sk.github.io/NetAlertX/) | [🔌 Plugins](https://github.com/jokob-sk/NetAlertX/blob/main/docs/PLUGINS.md) | [🤖 Ask AI](https://gurubase.io/g/netalertx)
 |----------------------| ----------------------|  ----------------------| ----------------------| ----------------------| 
 
 <a href="https://raw.githubusercontent.com/jokob-sk/NetAlertX/main/docs/img/GENERAL/github_social_image.jpg" target="_blank">
@@ -25,13 +25,13 @@ Head to [https://netalertx.com/](https://netalertx.com/) for more gifs and scree
 
 ```yaml
 docker run -d --rm --network=host \
-  -v local_path/config:/app/config \
-  -v local_path/db:/app/db \
-  --mount type=tmpfs,target=/app/api \
+  -v local_path/config:/data/config \
+  -v local_path/db:/data/db \
+  --mount type=tmpfs,target=/tmp/api \
   -e PUID=200 -e PGID=300 \
   -e TZ=Europe/Berlin \
   -e PORT=20211 \
-  jokobsk/netalertx:latest
+  ghcr.io/jokob-sk/netalertx:latest
 ```
 
 See alternative [docked-compose examples](https://github.com/jokob-sk/NetAlertX/blob/main/docs/DOCKER_COMPOSE.md).
@@ -58,10 +58,10 @@ See alternative [docked-compose examples](https://github.com/jokob-sk/NetAlertX/
 
 | Required | Path | Description |
 | :------------- | :------------- | :-------------| 
-| ✅ | `:/app/config` | Folder which will contain the `app.conf` & `devices.csv` ([read about devices.csv](https://github.com/jokob-sk/NetAlertX/blob/main/docs/DEVICES_BULK_EDITING.md)) files  | 
-| ✅ | `:/app/db` | Folder which will contain the `app.db` database file  | 
-| | `:/app/log` |  Logs folder useful for debugging if you have issues setting up the container  | 
-| | `:/app/api` |  A simple [API endpoint](https://github.com/jokob-sk/NetAlertX/blob/main/docs/API.md) containing static (but regularly updated) json and other files.   | 
+| ✅ | `:/data/config` | Folder which will contain the `app.conf` & `devices.csv` ([read about devices.csv](https://github.com/jokob-sk/NetAlertX/blob/main/docs/DEVICES_BULK_EDITING.md)) files  | 
+| ✅ | `:/data/db` | Folder which will contain the `app.db` database file  | 
+| | `:/tmp/log` |  Logs folder useful for debugging if you have issues setting up the container  | 
+| | `:/tmp/api` |  A simple [API endpoint](https://github.com/jokob-sk/NetAlertX/blob/main/docs/API.md) containing static (but regularly updated) json and other files. Path configurable via `NETALERTX_API` environment variable.   | 
 | | `:/app/front/plugins/<plugin>/ignore_plugin` | Map a file `ignore_plugin` to ignore a plugin. Plugins can be soft-disabled via settings. More in the [Plugin docs](https://github.com/jokob-sk/NetAlertX/blob/main/docs/PLUGINS.md).  | 
 | | `:/etc/resolv.conf` | Use a custom `resolv.conf` file for [better name resolution](https://github.com/jokob-sk/NetAlertX/blob/main/docs/REVERSE_DNS.md).  | 
 
@@ -70,7 +70,7 @@ See alternative [docked-compose examples](https://github.com/jokob-sk/NetAlertX/
 ### Initial setup
 
 - If unavailable, the app generates a default `app.conf` and `app.db` file on the first run.
-- The preferred way is to manage the configuration via the Settings section in the UI, if UI is inaccessible you can modify [app.conf](https://github.com/jokob-sk/NetAlertX/tree/main/back) in the `/app/config/` folder directly 
+- The preferred way is to manage the configuration via the Settings section in the UI, if UI is inaccessible you can modify [app.conf](https://github.com/jokob-sk/NetAlertX/tree/main/back) in the `/data/config/` folder directly 
 
 #### Setting up scanners
 

docs/DOCKER_MAINTENANCE.md

@@ -0,0 +1,205 @@
+# The NetAlertX Container Operator's Guide
+
+> [!WARNING]
+> ⚠️ **Important:** The documentation has been recently updated and some instructions may have changed.  
+> If you are using the currently live production image, please follow the instructions on [Docker Hub](https://hub.docker.com/r/jokobsk/netalertx) for building and running the container.  
+> These docs reflect the latest development version and may differ from the production image.
+
+This guide assumes you are starting with the official `docker-compose.yml` file provided with the project. We strongly recommend you start with or migrate to this file as your baseline and modify it to suit your specific needs (e.g., changing file paths). While there are many ways to configure NetAlertX, the default file is designed to meet the mandatory security baseline with layer-2 networking capabilities while operating securely and without startup warnings.
+
+This guide provides direct, concise solutions for common NetAlertX administrative tasks. It is structured to help you identify a problem, implement the solution, and understand the details.
+
+## Guide Contents
+ 
+- Using a Local Folder for Configuration  
+- Migrating from a Local Folder to a Docker Volume  
+- Applying a Custom Nginx Configuration  
+- Mounting Additional Files for Plugins  
+
+
+> [!NOTE]
+>
+>  Other relevant resources
+>  - [Fixing Permission Issues](./FILE_PERMISSIONS.md)
+>  - [Handling Backups](./BACKUPS.md)
+>  - [Accessing Application Logs](./LOGGING.md)
+
+---
+
+## Task: Using a Local Folder for Configuration
+
+### Problem
+
+You want to edit your `app.conf` and other configuration files directly from your host machine, instead of using a Docker-managed volume.
+
+### Solution
+
+1. Stop the container:
+
+   ```bash
+   docker-compose down
+   ```
+2. (Optional but Recommended) Back up your data using the method in Part 1.
+3. Create a local folder on your host machine (e.g., `/data/netalertx_config`).
+4. Edit `docker-compose.yml`:
+
+   * **Comment out** the `netalertx_config` volume entry.
+   * **Uncomment** and **set the path** for the "Example custom local folder" bind mount entry.
+
+   ```yaml
+   ...
+       volumes:
+         # - type: volume
+         #   source: netalertx_config
+         #   target: /data/config
+         #   read_only: false
+   ...
+       # Example custom local folder called /data/netalertx_config
+       - type: bind
+         source: /data/netalertx_config
+         target: /data/config
+         read_only: false
+   ...
+   ```
+5. (Optional) Restore your backup.
+6. Restart the container:
+
+   ```bash
+   docker-compose up -d
+   ```
+
+### About This Method
+
+This replaces the Docker-managed volume with a "bind mount." This is a direct mapping between a folder on your host computer (`/data/netalertx_config`) and a folder inside the container (`/data/config`), allowing you to edit the files directly.
+
+---
+
+## Task: Migrating from a Local Folder to a Docker Volume
+
+### Problem
+
+You are currently using a local folder (bind mount) for your configuration (e.g., `/data/netalertx_config`) and want to switch to the recommended Docker-managed volume (`netalertx_config`).
+
+### Solution
+
+1. Stop the container:
+
+   ```bash
+   docker-compose down
+   ```
+2. Edit `docker-compose.yml`:
+
+   * **Comment out** the bind mount entry for your local folder.
+   * **Uncomment** the `netalertx_config` volume entry.
+
+   ```yaml
+   ...
+       volumes:
+         - type: volume
+           source: netalertx_config
+           target: /data/config
+           read_only: false
+   ...
+       # Example custom local folder called /data/netalertx_config
+       # - type: bind
+       #   source: /data/netalertx_config
+       #   target: /data/config
+       #   read_only: false
+   ...
+   ```
+3. (Optional) Initialize the volume:
+
+   ```bash
+   docker-compose up -d && docker-compose down
+   ```
+4. Run the migration command (**replace `/data/netalertx_config` with your actual path**):
+
+   ```bash
+   docker run --rm -v netalertx_config:/config -v /data/netalertx_config:/local-config alpine \
+     sh -c "tar -C /local-config -c . | tar -C /config -x"
+   ```
+5. Restart the container:
+
+   ```bash
+   docker-compose up -d
+   ```
+
+### About This Method
+
+This uses a temporary `alpine` container that mounts *both* your source folder (`/local-config`) and destination volume (`/config`). The `tar ... | tar ...` command safely copies all files, including hidden ones, preserving structure.
+
+---
+
+## Task: Applying a Custom Nginx Configuration
+
+### Problem
+
+You need to override the default Nginx configuration to add features like LDAP, SSO, or custom SSL settings.
+
+### Solution
+
+1. Stop the container:
+
+   ```bash
+   docker-compose down
+   ```
+2. Create your custom config file on your host (e.g., `/data/my-netalertx.conf`).
+3. Edit `docker-compose.yml`:
+
+   ```yaml
+   ...
+       # Use a custom Enterprise-configured nginx config for ldap or other settings
+       - /data/my-netalertx.conf:/tmp/nginx/active-config/netalertx.conf:ro
+   ...
+   ```
+4. Restart the container:
+
+   ```bash
+   docker-compose up -d
+   ```
+
+### About This Method
+
+Docker’s bind mount overlays your host file (`my-netalertx.conf`) on top of the default file inside the container. The container remains read-only, but Nginx reads your file as if it were the default.
+
+---
+
+## Task: Mounting Additional Files for Plugins
+
+### Problem
+
+A plugin (like `DHCPLSS`) needs to read a file from your host machine (e.g., `/var/lib/dhcp/dhcpd.leases`).
+
+### Solution
+
+1. Stop the container:
+
+   ```bash
+   docker-compose down
+   ```
+2. Edit `docker-compose.yml` and add a new line under the `volumes:` section:
+
+   ```yaml
+   ...
+       volumes:
+   ...
+         # Mount for DHCPLSS plugin
+         - /var/lib/dhcp/dhcpd.leases:/mnt/dhcpd.leases:ro
+   ...
+   ```
+3. Restart the container:
+
+   ```bash
+   docker-compose up -d
+   ```
+4. In the NetAlertX web UI, configure the plugin to read from:
+
+   ```
+   /mnt/dhcpd.leases
+   ```
+
+### About This Method
+
+This maps your host file to a new, read-only (`:ro`) location inside the container. The plugin can then safely read this file without exposing anything else on your host filesystem.
+
+

docs/DOCKER_PORTAINER.md

@@ -0,0 +1,97 @@
+# Deploying NetAlertX in Portainer (via Stacks)
+
+This guide shows you how to set up **NetAlertX** using Portainer’s **Stacks** feature.
+
+![Portainer > Stacks](./img/DOCKER/DOCKER_PORTAINER.png)
+
+---
+
+## 1. Prepare Your Host
+
+Before deploying, make sure you have a folder on your Docker host for NetAlertX data. Replace `APP_FOLDER` with your preferred location, for example `/opt` here:
+
+```bash
+mkdir -p /opt/netalertx/config
+mkdir -p /opt/netalertx/db
+mkdir -p /opt/netalertx/log
+```
+
+---
+
+## 2. Open Portainer Stacks
+
+1. Log in to your **Portainer UI**.
+2. Navigate to **Stacks** → **Add stack**.
+3. Give your stack a name (e.g., `netalertx`).
+
+---
+
+## 3. Paste the Stack Configuration
+
+Copy and paste the following YAML into the **Web editor**:
+
+```yaml
+services:
+  netalertx:
+    container_name: netalertx
+
+    # Use this line for stable release
+    image: "ghcr.io/jokob-sk/netalertx:latest"      
+
+    # Or, use this for the latest development build
+    # image: "ghcr.io/jokob-sk/netalertx-dev:latest" 
+
+    network_mode: "host"
+    restart: unless-stopped
+
+    volumes:
+      - ${APP_FOLDER}/netalertx/config:/data/config
+      - ${APP_FOLDER}/netalertx/db:/data/db
+      # Optional: logs (useful for debugging setup issues, comment out for performance)
+      - ${APP_FOLDER}/netalertx/log:/tmp/log
+
+      # API storage options:
+      # (Option 1) tmpfs (default, best performance)
+      - type: tmpfs
+        target: /tmp/api
+
+      # (Option 2) bind mount (useful for debugging)
+      # - ${APP_FOLDER}/netalertx/api:/tmp/api
+
+    environment:
+      - TZ=${TZ}
+      - PORT=${PORT}
+      - APP_CONF_OVERRIDE=${APP_CONF_OVERRIDE}
+```
+
+---
+
+## 4. Configure Environment Variables
+
+In the **Environment variables** section of Portainer, add the following:
+
+* `APP_FOLDER=/opt` (or wherever you created the directories in step 1)
+* `TZ=Europe/Berlin` (replace with your timezone)
+* `PORT=22022` (or another port if needed)
+* `APP_CONF_OVERRIDE={"GRAPHQL_PORT":"22023"}` (optional advanced settings)
+
+---
+
+## 5. Deploy the Stack
+
+1. Scroll down and click **Deploy the stack**.
+2. Portainer will pull the image and start NetAlertX.
+3. Once running, access the app at:
+
+```
+http://<your-docker-host-ip>:22022
+```
+
+---
+
+## 6. Verify and Troubleshoot
+
+* Check logs via Portainer → **Containers** → `netalertx` → **Logs**.
+* Logs are stored under `${APP_FOLDER}/netalertx/log` if you enabled that volume.
+
+Once the application is running, configure it by reading the [initial setup](INITIAL_SETUP.md) guide, or [troubleshoot common issues](COMMON_ISSUES.md). 

docs/DOCKER_SWARM.md

@@ -0,0 +1,79 @@
+# Docker Swarm Deployment Guide (IPvlan)
+
+This guide describes how to deploy **NetAlertX** in a **Docker Swarm** environment using an `ipvlan` network. This enables the container to receive a LAN IP address directly, which is ideal for network monitoring.
+
+---
+
+## ⚙️ Step 1: Create an IPvlan Config-Only Network on All Nodes
+
+> Run this command on **each node** in the Swarm.
+
+```bash
+docker network create -d ipvlan \
+  --subnet=192.168.1.0/24 \              # 🔧 Replace with your LAN subnet
+  --gateway=192.168.1.1 \                # 🔧 Replace with your LAN gateway
+  -o ipvlan_mode=l2 \
+  -o parent=eno1 \                       # 🔧 Replace with your network interface (e.g., eth0, eno1)
+  --config-only \
+  ipvlan-swarm-config
+```
+
+---
+
+## 🖥️ Step 2: Create the Swarm-Scoped IPvlan Network (One-Time Setup)
+
+> Run this on **one Swarm manager node only**.
+
+```bash
+docker network create -d ipvlan \
+  --scope swarm \
+  --config-from ipvlan-swarm-config \
+  swarm-ipvlan
+```
+
+---
+
+## 🧾 Step 3: Deploy NetAlertX with Docker Compose
+
+Use the following Compose snippet to deploy NetAlertX with a **static LAN IP** assigned via the `swarm-ipvlan` network.
+
+```yaml
+services:
+  netalertx:
+    image: ghcr.io/jokob-sk/netalertx:latest
+    ports:
+      - 20211:20211
+    volumes:
+      - /mnt/YOUR_SERVER/netalertx/config:/data/config:rw
+      - /mnt/YOUR_SERVER/netalertx/db:/netalertx/data/db:rw
+      - /mnt/YOUR_SERVER/netalertx/logs:/netalertx/tmp/log:rw
+    environment:
+      - TZ=Europe/London
+      - PORT=20211
+    networks:
+      swarm-ipvlan:
+        ipv4_address: 192.168.1.240     # ⚠️ Choose a free IP from your LAN
+    deploy:
+      mode: replicated
+      replicas: 1
+      restart_policy:
+        condition: on-failure
+      placement:
+        constraints:
+          - node.role == manager        # 🔄 Or use: node.labels.netalertx == true
+
+networks:
+  swarm-ipvlan:
+    external: true
+```
+
+---
+
+## ✅ Notes
+
+* The `ipvlan` setup allows **NetAlertX** to have a direct IP on your LAN.
+* Replace `eno1` with your interface, IP addresses, and volume paths to match your environment.
+* Make sure the assigned IP (`192.168.1.240` above) is not in use or managed by DHCP.
+* You may also use a node label constraint instead of `node.role == manager` for more control.
+
+