diff --git a/docs/REVERSE_PROXY.md b/docs/REVERSE_PROXY.md
index d655a7e6..018d9292 100755
--- a/docs/REVERSE_PROXY.md
+++ b/docs/REVERSE_PROXY.md
@@ -2,6 +2,10 @@
 
 > Submitted by amazing [cvc90](https://github.com/cvc90) 🙏
 
+
+> [!NOTE] 
+> There are 2 NGINX files for PiAlert, one for the bare-metal Debian install (`pialert.debian.conf`), and one for the docker container (`pialert.template.conf`). Both can be found in the [install](https://github.com/jokob-sk/Pi.Alert/tree/main/install) folder. Map, or use, the one appropriate for your setup. 
+
 ## NGINX HTTP Configuration (Direct Path)
 
 1. On your NGINX server, create a new file called /etc/nginx/sites-available/pialert
diff --git a/docs/SUBNETS.md b/docs/SUBNETS.md
index f73c4a15..028b1045 100755
--- a/docs/SUBNETS.md
+++ b/docs/SUBNETS.md
@@ -2,6 +2,9 @@
 
 You need to specify the network interface and the network mask. You can also configure multiple subnets and specify VLANS (see exceptions below).
 
+> [!TIP]
+> You may need to increase the time between scans `ARPSCAN_RUN_SCHD` and the timeout `ARPSCAN_RUN_TIMEOUT` settings when adding more subnets. If the timeout setting is exceeded, the scan is cancelled to prevent application hanging from rogue plugins. Check [debugging plugins](/docs/DEBUG_PLUGINS.md) for more tips.
+
 ## Examples
 
 > [!NOTE] 
@@ -13,8 +16,6 @@ You need to specify the network interface and the network mask. You can also con
    * Two subnets:  `SCAN_SUBNETS    = ['192.168.1.0/24 --interface=eth0', '192.168.1.0/24 --interface=eth1 -vlan=107']` 
 
 
-
-
 ## Explanation
 
 ### Network mask
diff --git a/front/plugins/newdev_template/config.json b/front/plugins/newdev_template/config.json
index f93bc6eb..cd224ef9 100755
--- a/front/plugins/newdev_template/config.json
+++ b/front/plugins/newdev_template/config.json
@@ -403,8 +403,7 @@
         {
           "function": "dev_SkipRepeated",
           "type": "text.select",
-          "maxLength": 250,
-          "default_value": "",
+          "default_value": 0,
           "options": ["{value}"],
           "options_params" : [
             {