diff --git a/front/plugins/snmp_discovery/README.md b/front/plugins/snmp_discovery/README.md
index 1d09ecdc..c8281a79 100755
--- a/front/plugins/snmp_discovery/README.md
+++ b/front/plugins/snmp_discovery/README.md
@@ -1,6 +1,6 @@
 ## Overview
 
-A plugin for importing devices from an SNMP enabled router or switch.  
+A plugin for importing devices from an SNMP enabled router or switch.  Using SNMP offers an efficient way to discover IPv4 devices across one or more networks/subnets/vlans.
 
 ### Usage
 
@@ -8,8 +8,29 @@ Specify the following settings in the Settings section of PiAlert:
 
 - `SNMPDSC_routers` - A list of `snmpwalk` commands to execute against IP addresses of roputers/switches with SNMP turned on. For example: `snmpwalk -v 2c -c public -OXsq 192.168.1.1 .1.3.6.1.2.1.3.1.1.2`
 
+
+### Setup Cisco IOS
+
+Enable IOS SNMP service and restrict to selected (internal) IP/Subnet.
+
+````
+! Add standard ip access-list 10
+ip access-list standard 10
+ permit 192.168.1.0 0.0.0.255
+ permit host 192.168.2.10
+!
+! Enable IOS snmp server with Read Only community 'mysnmpcommunitysecret' name.
+! Restrict connections to access-list 10
+snmp-server community mysnmpcommunitysecret RO 10
+````
+
+Confirm SNMP enabled
+````
+show snmp
+````
+
 ### Notes
 
-- Authentication is not supported.
-- Only IPv4 supported. 
-- Expected output (ingestion) in format `iso.3.6.1.2.1.3.1.1.2.3.1.192.168.1.2 "6C 6C 6C 6C 6C 6C "`.
\ No newline at end of file
+- Only IPv4 supported.
+- The SNMP OID `.1.1.1.3.6.1.2.1.3.1.1.2` is specifically for devices IPv4 ARP table. This OID has been tested on Cisco ISRs and other L3 devices. Support may vary between other vendors / devices.
+- Expected output (ingestion) in format `iso.3.6.1.2.1.3.1.1.2.3.1.192.168.1.2 "6C 6C 6C 6C 6C 6C "`.