vh/NetAlertX
1
0
Fork 0
mirror of https://github.com/jokob-sk/NetAlertX.git synced 2025-12-07 09:36:05 -08:00
Code Issues Actions Packages Projects Releases Wiki Activity

pholus 2.2

Browse Source
This commit is contained in:
Jokob-sk
2022-12-31 00:25:32 +11:00
parent bde96af7da
commit 73fd1ef9b4
10 changed files with 486 additions and 503 deletions
Download Patch File Download Diff File Expand all files Collapse all files

122
front/php/templates/language/de_de.php
View File

@@ -410,127 +410,5 @@ $lang['de_de'] = array(
// Settings
//////////////////////////////////////////////////////////////////
//General
'SCAN_SUBNETS_name' => 'Subnets to scan',
'SCAN_SUBNETS_description' => '
The scan time itself depends on the number of IP addresses to check.
The number of Ips to check depends on the <a target="_blank" href="https://www.calculator.net/ip-subnet-calculator.html">network mask</a> you set here.
For example, a <code>/24</code> mask results in 256 IPs to check, where as a <code>/16</code>
mask checks around 65,536. Every IP takes a couple seconds to scan. This means that with an incorrect configuration
the scan will take hours to complete instead of seconds.
<ol>
<li>Specify the network mask. For example, the filter <code>192.168.1.0/24</code> covers IP ranges 192.168.1.0 to 192.168.1.255.</li>
<li>Run <code>iwconfig</code> in your ocntainer to find your interface name(s) (e.g.: <code>eth0</code>, <code>eth1</code>)</li>
</ol>
',
'PRINT_LOG_name' => 'Print additional logging',
'PRINT_LOG_description' => 'This setting will enable more verbose logging. Useful for debugging events writing into the database.',
'TIMEZONE_name' => 'Time zone',
'TIMEZONE_description' => 'Time zone to display stats correctly. Find your time zone <a target="_blank" href="https://en.wikipedia.org/wiki/List_of_tz_database_time_zones" rel="nofollow">here</a>.',
'PIALERT_WEB_PROTECTION_name' => 'Enable login',
'PIALERT_WEB_PROTECTION_description' => 'When enabled a login dialog is displayed. Read below carefully if you get locked out of your instance.',
'PIALERT_WEB_PASSWORD_name' => 'Login password',
'PIALERT_WEB_PASSWORD_description' => 'The default password is <code>123456</code>. To change password run <code>/home/pi/pialert/back/pialert-cli</code> in the container',
'INCLUDED_SECTIONS_name' => 'Notify on',
'INCLUDED_SECTIONS_description' => 'Specifies which events trigger notifications. Remove the event type(s) you don\'t want to get notified on. This setting overrides device-specific settings in the UI. (CTRL + Click to select / deselect).',
'SCAN_CYCLE_MINUTES_name' => 'Scan cycle delay',
'SCAN_CYCLE_MINUTES_description' => 'The delay between scans. If using arp-scan, the scan time itself depends on the number of IP addresses to check. This is influenced by the network mask set in the <code>SCAN_SUBNETS</code> setting at the top. Every IP takes a couple seconds to scan.',
'DAYS_TO_KEEP_EVENTS_name' => 'Delete events older than',
'DAYS_TO_KEEP_EVENTS_description' => 'This is a maintenance setting. This specifies the number of days worth of event entries that will be kept. All older events will be deleted periodically.',
'REPORT_DASHBOARD_URL_name' => 'Pi.Alert URL',
'REPORT_DASHBOARD_URL_description' => 'This URL is used as the base for generating links in the emails. Enter full URL starting with <code>http://</code> including the port number (no trailig slash <code>/</code>).',
//Email
'REPORT_MAIL_name' => 'Enable email',
'REPORT_MAIL_description' => 'If enabled an email is sent out with a list of changes you\'ve subscribed to. Please also fill out all remaining settings related to the SMTP setup below.',
'SMTP_SERVER_name' => 'SMTP server URL',
'SMTP_SERVER_description' => 'The SMTP server host URL. For example <code>smtp-relay.sendinblue.com</code>.',
'SMTP_PORT_name' => 'SMTP server PORT',
'SMTP_PORT_description' => 'Port number used for the SMTP connection.',
'SMTP_SKIP_LOGIN_name' => 'Skip authentication',
'SMTP_SKIP_LOGIN_description' => 'Don\'t use authentication when connecting to the SMTP server.',
'SMTP_USER_name' => 'SMTP user',
'SMTP_USER_description' => 'The user name used to login into the SMTP server (sometimes a full email address).',
'SMTP_PASS_name' => 'SMTP password',
'SMTP_PASS_description' => 'The SMTP server password. ',
'SMTP_SKIP_TLS_name' => 'Don\'t use TLS',
'SMTP_SKIP_TLS_description' => 'Disable TLS when connecting to your SMTP server.',
'REPORT_TO_name' => 'Send email to',
'REPORT_TO_description' => 'Email address to which the notification will be send to.',
'REPORT_FROM_name' => 'Email subject',
'REPORT_FROM_description' => 'Notification email subject line.',
//Webhooks
'REPORT_WEBHOOK_name' => 'Enable Webhooks',
'REPORT_WEBHOOK_description' => 'Enable webhooks for notifications. If enabled, configure related settings below.',
'WEBHOOK_URL_name' => 'Target URL',
'WEBHOOK_URL_description' => 'Target URL starting with <code>http://</code> or <code>https://</code>.',
'WEBHOOK_PAYLOAD_name' => 'Payload type',
'WEBHOOK_PAYLOAD_description' => 'The Webhook payload data format for the "body > attachements > text" attribute in the payload json. See an examnple of the payload <a target="_blank" href="https://github.com/jokob-sk/Pi.Alert/blob/main/docs/webhook_json_sample.json">here</a>. (e.g.: for discord use <code>\'html\'</code>)',
'WEBHOOK_REQUEST_METHOD_name' => 'Request method',
'WEBHOOK_REQUEST_METHOD_description' => 'The HTTP request method to be used for the webhook call.',
// Apprise
'REPORT_APPRISE_name' => 'Enable Apprise',
'REPORT_APPRISE_description' => 'Enable sending notifications via <a target="_blank" href="https://hub.docker.com/r/caronc/apprise">Apprise</a>.',
'APPRISE_HOST_name' => 'Apprise host URL',
'APPRISE_HOST_description' => 'Apprise host URL starting with <code>http://</code> or <code>https://</code>. (don\'t forget to include <code>/notify</code> at the end)',
'APPRISE_URL_name' => 'Apprise notification URL',
'APPRISE_URL_description' => 'Apprise notification target URL.',
// NTFY
'REPORT_NTFY_name' => 'Enable NTFY',
'REPORT_NTFY_description' => 'Enable sending notifications via <a target="_blank" href="https://ntfy.sh/">NTFY</a>.',
'NTFY_HOST_name' => 'NTFY host URL',
'NTFY_HOST_description' => 'NTFY host URL starting with <code>http://</code> or <code>https://</code>. You can use the hosted instance on <a target="_blank" href="https://ntfy.sh/">https://ntfy.sh</a> by simply entering <code>https://ntfy.sh</code>.',
'NTFY_TOPIC_name' => 'NTFY topic',
'NTFY_TOPIC_description' => 'Your secret topic.',
'NTFY_USER_name' => 'NTFY user',
'NTFY_USER_description' => 'Enter user if you need (host) an instance with enabled authetication.',
'NTFY_PASSWORD_name' => 'NTFY password',
'NTFY_PASSWORD_description' => 'Enter password if you need (host) an instance with enabled authetication.',
// Pushsafer
'REPORT_PUSHSAFER_name' => 'Enable Pushsafer',
'REPORT_PUSHSAFER_description' => 'Enable sending notifications via <a target="_blank" href="https://www.pushsafer.com/">Pushsafer</a>.',
'PUSHSAFER_TOKEN_name' => 'Pushsafer token',
'PUSHSAFER_TOKEN_description' => 'Your secret Pushsafer API key (token).',
// MQTT
'REPORT_MQTT_name' => 'Enable MQTT',
'REPORT_MQTT_description' => 'Enable sending notifications via <a target="_blank" href="https://www.home-assistant.io/integrations/mqtt/">MQTT</a> to your Home Assistance instance.',
'MQTT_BROKER_name' => 'MQTT broker URL',
'MQTT_BROKER_description' => 'MQTT host URL (don\'t include <code>http://</code> or <code>https://</code>).',
'MQTT_PORT_name' => 'MQTT broker port',
'MQTT_PORT_description' => 'Port number where the broker is listening. Usually <code>1883</code>.',
'MQTT_USER_name' => 'MQTT user',
'MQTT_USER_description' => 'User name used to login into your MQTT broker instance.',
'MQTT_PASSWORD_name' => 'MQTT password',
'MQTT_PASSWORD_description' => 'Password used to login into your MQTT broker instance.',
'MQTT_QOS_name' => 'MQTT Quality of Service',
'MQTT_QOS_description' => 'Quality of service setting for MQTT message sending. 0 - Low quality to 2 - High quality. The higher the quality the longer the delay.',
'MQTT_DELAY_SEC_name' => 'MQTT delay per device',
'MQTT_DELAY_SEC_description' => 'A little hack - delay adding to the queue in case the process is restarted and previous publish processes aborted (it takes ~2s to update a sensor config on the broker). Tested with 2-3 seconds of delay. This delay is only applied when devices are created (during the first notification loop). It doesn\'t affect subsequent scans or notifications.',
//DynDNS
'DDNS_ACTIVE_name' => 'Enable DynDNS',
'DDNS_ACTIVE_description' => '',
'DDNS_DOMAIN_name' => 'DynDNS domain URL',
'DDNS_DOMAIN_description' => '',
'DDNS_USER_name' => 'DynDNS user',
'DDNS_USER_description' => '',
'DDNS_PASSWORD_name' => 'DynDNS password',
'DDNS_PASSWORD_description' => '',
'DDNS_UPDATE_URL_name' => 'DynDNS update URL',
'DDNS_UPDATE_URL_description' => 'Update URL starting with <code>http://</code> or <code>https://</code>.',
// PiHole
'PIHOLE_ACTIVE_name' => 'Enable PiHole mapping',
'PIHOLE_ACTIVE_description' => 'If enabled you need to map <code>:/etc/pihole/pihole-FTL.db</code> in your <code>docker-compose.yml</code> file.',
'DHCP_ACTIVE_name' => 'Enable PiHole DHCP',
'DHCP_ACTIVE_description' => 'If enabled you need to map <code>:/etc/pihole/dhcp.leases</code> in your <code>docker-compose.yml</code> file.',
);
?>

20
front/php/templates/language/en_us.php
View File

@@ -544,20 +544,20 @@ the arp-scan will take hours to complete instead of seconds.
// PiHole
'PIHOLE_ACTIVE_name' => 'Enable PiHole mapping',
'PIHOLE_ACTIVE_description' => 'If enabled you need to map <code>:/etc/pihole/pihole-FTL.db</code> in your <code>docker-compose.yml</code> file.',
'PIHOLE_ACTIVE_description' => 'You need to map<code>:/etc/pihole/pihole-FTL.db</code> in the <code>docker-compose.yml</code> file if you enable this setting.',
'DHCP_ACTIVE_name' => 'Enable PiHole DHCP',
'DHCP_ACTIVE_description' => 'If enabled you need to map <code>:/etc/pihole/dhcp.leases</code> in your <code>docker-compose.yml</code> file.',
'DHCP_ACTIVE_description' => 'You need to map <code>:/etc/pihole/dhcp.leases</code> in the <code>docker-compose.yml</code> file if you enable this setting.',
// Pholus
'PHOLUS_ACTIVE_name' => 'Enable Pholus scan',
'PHOLUS_ACTIVE_description' => '<a href="https://github.com/jokob-sk/Pi.Alert/tree/main/pholus" target="_blank" >Pholus</a> is a sniffing tool to discover additional information about the devices on the network, including the device name. Please be aware it can spam the network with unnecessary traffic. Depends on the <a href="#SCAN_SUBNETS"><code>SCAN_SUBNETS</code> setting</a>.',
'PHOLUS_TIMEOUT_name' => 'Pholus timeout',
'PHOLUS_TIMEOUT_description' => 'How long in seconds should Pholus be sniffing on each interface. Only used if an <code>(unknown)</code> device is found. The longer you leave it on, the more likely devices would broadcast more info. This timeout adds to the time it takes to perform an arp-scan on your network.',
'PHOLUS_FORCE_name' => 'Force scan',
'PHOLUS_FORCE_description' => 'Force scan every network scan, even if there are no <code>(unknown)</code> devices. Be careful enabling this as the sniffing can easily flood your network.',
'PHOLUS_ACTIVE_name' => 'Cycle run',
'PHOLUS_ACTIVE_description' => 'If enabled will execute during every network scan cycle until there are no <code>(unknown)</code> or <code>(name not found)</code> devices. <a href="https://github.com/jokob-sk/Pi.Alert/tree/main/pholus" target="_blank" >Pholus</a> is a sniffing tool to discover additional information about the devices on the network, including the device name. Please be aware it can spam the network with unnecessary traffic. Depends on the <a href="#SCAN_SUBNETS"><code>SCAN_SUBNETS</code> setting</a>.',
'PHOLUS_TIMEOUT_name' => 'Cycle run timeout',
'PHOLUS_TIMEOUT_description' => 'How long in seconds should Pholus be sniffing on each interface if above condition is fulfilled. The longer you leave it on, the more likely devices would broadcast more info. This timeout adds to the time it takes to perform an arp-scan on your network.',
'PHOLUS_FORCE_name' => 'Cycle force scan',
'PHOLUS_FORCE_description' => 'Force scan every network scan, even if there are no <code>(unknown)</code> or <code>(name not found)</code> devices. Be careful enabling this as the sniffing can easily flood your network.',
'PHOLUS_DAYS_DATA_name' => 'Data retention',
'PHOLUS_DAYS_DATA_description' => 'How many days of Pholus scan entries should be kept (globally, not device specific!). The <a href="/maintenance.php#tab_Logging_id">pialert_pholus.log</a> file is not touched.',
'PHOLUS_RUN_name' => 'Scheduled scan',
'PHOLUS_DAYS_DATA_description' => 'How many days of Pholus scan entries should be kept (globally, not device specific!). The <a href="/maintenance.php#tab_Logging">pialert_pholus.log</a> file is not touched.',
'PHOLUS_RUN_name' => 'Scheduled run',
'PHOLUS_RUN_description' => 'Enable a regular Pholus scan / sniff on your network. The scheduling settings can be found below.',
'PHOLUS_RUN_TIMEOUT_name' => 'Scheduled run timeout',
'PHOLUS_RUN_TIMEOUT_description' => 'The timeout in seconds for the scheduled Pholus scan. Same notes regarding the duration apply as on the <a href="#PHOLUS_TIMEOUT"><code>PHOLUS_TIMEOUT</code> setting</a>. A scheduled scan doesn\'t check if there are <code>(unknown)</code> devices, the scan is executed either way.',

121
front/php/templates/language/es_es.php
View File

@@ -415,126 +415,5 @@ $lang['es_es'] = array(
// Settings
//////////////////////////////////////////////////////////////////
//General
'SCAN_SUBNETS_name' => 'Subnets to scan',
'SCAN_SUBNETS_description' => '
The scan time itself depends on the number of IP addresses to check.
The number of Ips to check depends on the <a target="_blank" href="https://www.calculator.net/ip-subnet-calculator.html">network mask</a> you set here.
For example, a <code>/24</code> mask results in 256 IPs to check, where as a <code>/16</code>
mask checks around 65,536. Every IP takes a couple seconds to scan. This means that with an incorrect configuration
the scan will take hours to complete instead of seconds.
<ol>
<li>Specify the network mask. For example, the filter <code>192.168.1.0/24</code> covers IP ranges 192.168.1.0 to 192.168.1.255.</li>
<li>Run <code>iwconfig</code> in your container to find your interface name(s) (e.g.: <code>eth0</code>, <code>eth1</code>)</li>
</ol>
',
'PRINT_LOG_name' => 'Print additional logging',
'PRINT_LOG_description' => 'This setting will enable more verbose logging. Useful for debugging events writing into the database.',
'TIMEZONE_name' => 'Time zone',
'TIMEZONE_description' => 'Time zone to display stats correctly. Find your time zone <a target="_blank" href="https://en.wikipedia.org/wiki/List_of_tz_database_time_zones" rel="nofollow">here</a>.',
'PIALERT_WEB_PROTECTION_name' => 'Enable login',
'PIALERT_WEB_PROTECTION_description' => 'When enabled a login dialog is displayed. Read below carefully if you get locked out of your instance.',
'PIALERT_WEB_PASSWORD_name' => 'Login password',
'PIALERT_WEB_PASSWORD_description' => 'The default password is <code>123456</code>. To change password run <code>/home/pi/pialert/back/pialert-cli</code> in the container',
'INCLUDED_SECTIONS_name' => 'Notify on',
'INCLUDED_SECTIONS_description' => 'Specifies which events trigger notifications. Remove the event type(s) you don\'t want to get notified on. This setting overrides device-specific settings in the UI. (CTRL + Click to select / deselect).',
'SCAN_CYCLE_MINUTES_name' => 'Scan cycle delay',
'SCAN_CYCLE_MINUTES_description' => 'The delay between scans. If using arp-scan, the scan time itself depends on the number of IP addresses to check. This number depends on the network mask set in the <code>SCAN_SUBNETS</code> setting at the top. Every IP takes a couple seconds to scan.',
'DAYS_TO_KEEP_EVENTS_name' => 'Delete events older than',
'DAYS_TO_KEEP_EVENTS_description' => 'This is a maintenance setting. This specifies the number of days worth of event entries that will be kept. All older events will be deleted periodically.',
'REPORT_DASHBOARD_URL_name' => 'Pi.Alert URL',
'REPORT_DASHBOARD_URL_description' => 'This URL is used as the base for generating links in the emails. Enter full URL starting with <code>http://</code> including the port number (no trailig slash <code>/</code>).',
//Email
'REPORT_MAIL_name' => 'Enable email',
'REPORT_MAIL_description' => 'If enabled an email is sent out with a list of changes you\'ve subscribed to. Please also fill out all remaining settings related to the SMTP setup below.',
'SMTP_SERVER_name' => 'SMTP server URL',
'SMTP_SERVER_description' => 'The SMTP server host URL. For example <code>smtp-relay.sendinblue.com</code>.',
'SMTP_PORT_name' => 'SMTP server PORT',
'SMTP_PORT_description' => 'Port number used for the SMTP connection.',
'SMTP_SKIP_LOGIN_name' => 'Skip authentication',
'SMTP_SKIP_LOGIN_description' => 'Don\'t use authentication when connecting to the SMTP server.',
'SMTP_USER_name' => 'SMTP user',
'SMTP_USER_description' => 'The user name used to login into the SMTP server (sometimes a full email address).',
'SMTP_PASS_name' => 'SMTP password',
'SMTP_PASS_description' => 'The SMTP server password. ',
'SMTP_SKIP_TLS_name' => 'Don\'t use TLS',
'SMTP_SKIP_TLS_description' => 'Disable TLS when connecting to your SMTP server.',
'REPORT_TO_name' => 'Send email to',
'REPORT_TO_description' => 'Email address to which the notification will be send to.',
'REPORT_FROM_name' => 'Email subject',
'REPORT_FROM_description' => 'Notification email subject line.',
//Webhooks
'REPORT_WEBHOOK_name' => 'Enable Webhooks',
'REPORT_WEBHOOK_description' => 'Enable webhooks for notifications. If enabled, configure related settings below.',
'WEBHOOK_URL_name' => 'Target URL',
'WEBHOOK_URL_description' => 'Target URL starting with <code>http://</code> or <code>https://</code>.',
'WEBHOOK_PAYLOAD_name' => 'Payload type',
'WEBHOOK_PAYLOAD_description' => 'The Webhook payload data format for the "body > attachements > text" attribute in the payload json. See an examnple of the payload <a target="_blank" href="https://github.com/jokob-sk/Pi.Alert/blob/main/docs/webhook_json_sample.json">here</a>. (e.g.: for discord use <code>\'html\'</code>)',
'WEBHOOK_REQUEST_METHOD_name' => 'Request method',
'WEBHOOK_REQUEST_METHOD_description' => 'The HTTP request method to be used for the webhook call.',
// Apprise
'REPORT_APPRISE_name' => 'Enable Apprise',
'REPORT_APPRISE_description' => 'Enable sending notifications via <a target="_blank" href="https://hub.docker.com/r/caronc/apprise">Apprise</a>.',
'APPRISE_HOST_name' => 'Apprise host URL',
'APPRISE_HOST_description' => 'Apprise host URL starting with <code>http://</code> or <code>https://</code>. (don\'t forget to include <code>/notify</code> at the end)',
'APPRISE_URL_name' => 'Apprise notification URL',
'APPRISE_URL_description' => 'Apprise notification target URL.',
// NTFY
'REPORT_NTFY_name' => 'Enable NTFY',
'REPORT_NTFY_description' => 'Enable sending notifications via <a target="_blank" href="https://ntfy.sh/">NTFY</a>.',
'NTFY_HOST_name' => 'NTFY host URL',
'NTFY_HOST_description' => 'NTFY host URL starting with <code>http://</code> or <code>https://</code>. You can use the hosted instance on <a target="_blank" href="https://ntfy.sh/">https://ntfy.sh</a> by simply entering <code>https://ntfy.sh</code>.',
'NTFY_TOPIC_name' => 'NTFY topic',
'NTFY_TOPIC_description' => 'Your secret topic.',
'NTFY_USER_name' => 'NTFY user',
'NTFY_USER_description' => 'Enter user if you need (host) an instance with enabled authetication.',
'NTFY_PASSWORD_name' => 'NTFY password',
'NTFY_PASSWORD_description' => 'Enter password if you need (host) an instance with enabled authetication.',
// Pushsafer
'REPORT_PUSHSAFER_name' => 'Enable Pushsafer',
'REPORT_PUSHSAFER_description' => 'Enable sending notifications via <a target="_blank" href="https://www.pushsafer.com/">Pushsafer</a>.',
'PUSHSAFER_TOKEN_name' => 'Pushsafer token',
'PUSHSAFER_TOKEN_description' => 'Your secret Pushsafer API key (token).',
// MQTT
'REPORT_MQTT_name' => 'Enable MQTT',
'REPORT_MQTT_description' => 'Enable sending notifications via <a target="_blank" href="https://www.home-assistant.io/integrations/mqtt/">MQTT</a> to your Home Assistance instance.',
'MQTT_BROKER_name' => 'MQTT broker URL',
'MQTT_BROKER_description' => 'MQTT host URL (don\'t include <code>http://</code> or <code>https://</code>).',
'MQTT_PORT_name' => 'MQTT broker port',
'MQTT_PORT_description' => 'Port number where the broker is listening. Usually <code>1883</code>.',
'MQTT_USER_name' => 'MQTT user',
'MQTT_USER_description' => 'User name used to login into your MQTT broker instance.',
'MQTT_PASSWORD_name' => 'MQTT password',
'MQTT_PASSWORD_description' => 'Password used to login into your MQTT broker instance.',
'MQTT_QOS_name' => 'MQTT Quality of Service',
'MQTT_QOS_description' => 'Quality of service setting for MQTT message sending. 0 - Low quality to 2 - High quality. The higher the quality the longer the delay.',
'MQTT_DELAY_SEC_name' => 'MQTT delay per device',
'MQTT_DELAY_SEC_description' => 'A little hack - delay adding to the queue in case the process is restarted and previous publish processes aborted (it takes ~<code>2</code>s to update a sensor config on the broker). Tested with <code>2</code>-<code>3</code> seconds of delay. This delay is only applied when devices are created (during the first notification loop). It doesn\'t affect subsequent scans or notifications.',
//DynDNS
'DDNS_ACTIVE_name' => 'Enable DynDNS',
'DDNS_ACTIVE_description' => '',
'DDNS_DOMAIN_name' => 'DynDNS domain URL',
'DDNS_DOMAIN_description' => '',
'DDNS_USER_name' => 'DynDNS user',
'DDNS_USER_description' => '',
'DDNS_PASSWORD_name' => 'DynDNS password',
'DDNS_PASSWORD_description' => '',
'DDNS_UPDATE_URL_name' => 'DynDNS update URL',
'DDNS_UPDATE_URL_description' => 'Update URL starting with <code>http://</code> or <code>https://</code>.',
// PiHole
'PIHOLE_ACTIVE_name' => 'Enable PiHole mapping',
'PIHOLE_ACTIVE_description' => 'If enabled you need to map <code>:/etc/pihole/pihole-FTL.db</code> in your <code>docker-compose.yml</code> file.',
'DHCP_ACTIVE_name' => 'Enable PiHole DHCP',
'DHCP_ACTIVE_description' => 'If enabled you need to map <code>:/etc/pihole/dhcp.leases</code> in your <code>docker-compose.yml</code> file.'
);
?>