mirror of
https://github.com/Metabolix/HackBGRT.git
synced 2025-12-06 17:15:42 -08:00
44 lines
2.1 KiB
Plaintext
44 lines
2.1 KiB
Plaintext
# vim: set fileencoding=utf-8
|
|
# The same options may be given also as command line parameters in the EFI Shell, which is useful for debugging.
|
|
|
|
# Boot loader path. MS = either backup or original Windows boot loader.
|
|
boot=MS
|
|
|
|
# The image is specified with an image line.
|
|
# Multiple image lines may be present, in which case one will be picked by random.
|
|
# The image line may contain the following parts:
|
|
# Any of the following:
|
|
# - "n=(number)", a weight for this image in the randomization process. Default: n=1.
|
|
# - "x=(number)" or "x=keep", the x offset from the center. Default: x=0.
|
|
# - "y=(number)" or "y=keep", the y offset from the center. Default: y=0.
|
|
# - "o=(0|90|180|270|keep)", the screen orientation, degrees anticlockwise. Default: o=keep.
|
|
# One of the following:
|
|
# - "keep" to keep the firmware logo. Also keeps coordinates by default.
|
|
# - "remove" to remove the BGRT. Makes x and y meaningless.
|
|
# - "black" to use only a black image. Makes x and y meaningless.
|
|
# - "path=..." to read a BMP file.
|
|
# * NOTE: For path=\EFI\HackBGRT\*, the installer will copy and convert the file if necessary.
|
|
# * NOTE: For other paths, make sure that the file is a 24-bit BMP file with a 54-byte header.
|
|
# * NOTE: The file must be on the EFI System Partition. Do not add a drive letter!
|
|
# Examples:
|
|
# - image=remove
|
|
# - image=black
|
|
# - image= x=0 y=-200 path=\EFI\HackBGRT\topimage.bmp
|
|
# - image= n=1 o=90 path=\EFI\HackBGRT\sideways.bmp
|
|
# - image= n=50 y=999999 o=keep path=\EFI\HackBGRT\probable.bmp
|
|
# The above examples together would produce
|
|
# - 1/54 chance for the default OS logo
|
|
# - 1/54 chance for black screen
|
|
# - 1/54 chance for topimage.bmp, 200 px above the center of the screen
|
|
# - 1/54 chance for splash.bmp, centered, orientation set to 90 degrees
|
|
# - 50/54 chance for probable.bmp, at the bottom edge, explicitly default orientation
|
|
# Default: just one image.
|
|
image= y=-200 path=\EFI\HackBGRT\splash.bmp
|
|
|
|
# Preferred resolution. Use 0x0 for maximum and -1x-1 for original.
|
|
resolution=0x0
|
|
|
|
# Debug mode (0 for disabled, 1 for enabled).
|
|
# Shows debug information and prompts for keypress before booting.
|
|
debug=0
|